[Sat Jun  1 17:48:38 2013] Detection parameters:
  Position = (257.4, 225.1) = 8 22 16.84 -43 4 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 979.1 +/- 44.3
  Background counts = 699.8
  Rate = 0.05 +/- 0.002

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 6.10'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sat Jun  1 17:53:16 2013] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.767
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 9.48"
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src70.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src70.csv
[Sat Jun  1 17:53:20 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src70_1.ximg exists
[Sat Jun  1 17:53:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src70.csv
[Sat Jun  1 17:53:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sat Jun  1 17:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sat Jun  1 17:53:22 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sat Jun  1 17:53:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sat Jun  1 17:53:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:54:32 2013] Source 137 is offset by 5.106616 and 5.785223 pixels which is larger than
2 X fitted extent = 2.394722 x 2.394722, not incorporating fit results
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:54:34 2013] Source is confused with source 289
[Sat Jun  1 17:56:56 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sat Jun  1 17:56:56 2013] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.767
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 9.48"
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src67.ximg exists
[Sat Jun  1 17:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src67.csv
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src67_1.ximg exists
[Sat Jun  1 17:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src67.csv
[Sat Jun  1 17:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:01 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sat Jun  1 17:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sat Jun  1 17:57:01 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sat Jun  1 17:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sat Jun  1 17:57:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:57 2013] Spatial fit model total counts = 9567.770000, observed total counts = 8581.000000
[Sat Jun  1 17:57:57 2013] Poor agreement between spatial fit and data for source 137
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:52:28 2013] XMMSAS src. selection expression = ellipse(22343.743622, 19532.796402, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 09:52:28 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src137_src.reg
[Sun Jun  2 09:52:28 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (220, 188) - (295, 263)
[Sun Jun  2 09:52:28 2013] XMMSAS bgd. selection expression = annulus(22343.743622, 19532.796402, 1087.500000, 2175.000000, X, Y) && !ellipse(23143.924316, 21007.624023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19374.494000, 21314.720000, 1515.488044, 1515.488044, 0.000000, X, Y) && !ellipse(31927.404000, 29800.158000, 9815.952282, 9815.952282, 0.000000, X, Y) && !ellipse(21375.220000, 22977.542000, 1366.296039, 1366.296039, 0.000000, X, Y) && !ellipse(24359.731262, 20512.271225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.948800, 22804.905600, 1126.992032, 1126.992032, 0.000000, X, Y) && !ellipse(33830.278000, 31635.908000, 10886.160313, 10886.160313, 0.000000, X, Y) && !ellipse(18996.170000, 17774.168200, 1739.200050, 1739.200050, 0.000000, X, Y) && !ellipse(22607.637604, 21291.324524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25264.344000, 22809.919000, 1239.288036, 1239.288036, 0.000000, X, Y) && !ellipse(24616.408875, 22507.994354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23025.979950, 20165.675735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22918.472000, 22235.514340, 718.919221, 718.919221, 0.000000, X, Y) && !ellipse(22302.317200, 22381.291046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20479.936951, 17071.028015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19320.226791, 18399.381653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23140.340027, 19848.934723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21571.000000, 21421.099701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20274.289001, 17666.885620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25351.955536, 19208.025253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19951.426819, 17950.256897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21311.573105, 21975.133957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21453.814972, 20481.934860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.904000, 22044.422000, 612.195218, 612.195218, 0.000000, X, Y) && !ellipse(24104.798004, 20326.566528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19409.196823, 19558.187775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22328.931213, 20148.935776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21836.329025, 21769.723633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19623.930283, 18796.020462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21396.753082, 17024.255692, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:28 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src137.gif