[Sat Jun  1 17:48:36 2013] Detection parameters:
  Position = (112.4, 251.0) = 8 23 14.35 -43 2 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1903.9 +/- 65.5
  Background counts = 406.6
  Rate = 0.07 +/- 0.002

[Sat Jun  1 17:49:11 2013] Off-axis axis estimate = 13.92'
[Sat Jun  1 17:53:16 2013] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:53:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  1 17:53:16 2013] Initial guess for spatial extent in simple fitting = 13.39"
[Sat Jun  1 17:53:16 2013] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.879
[Sat Jun  1 17:53:16 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 13.39"
[Sat Jun  1 17:53:19 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src41.ximg exists
[Sat Jun  1 17:53:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src41.csv
[Sat Jun  1 17:53:19 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Jun  1 17:53:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src41.csv
[Sat Jun  1 17:53:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:53:21 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Jun  1 17:53:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat Jun  1 17:53:21 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Jun  1 17:53:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sat Jun  1 17:53:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:54:29 2013] Source 121 is offset by 4.062469 and 0.283372 pixels which is larger than
2 X fitted extent = 1.521398 x 1.521398, not incorporating fit results
[Sat Jun  1 17:54:31 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 121 at 10.256344 pixels away
[Sat Jun  1 17:54:33 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:54:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:54:33 2013] Assessing source extent using major
[Sat Jun  1 17:54:33 2013] Source does appear to be extended
[Sat Jun  1 17:54:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 17:54:33 2013] Source is confused with source 1
[Sat Jun  1 17:56:56 2013] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 17:56:56 2013] Initial guess for spatial extent in simple fitting = 13.39"
[Sat Jun  1 17:56:56 2013] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.879
[Sat Jun  1 17:56:56 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 13.39"
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src39.ximg exists
[Sat Jun  1 17:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src39.csv
[Sat Jun  1 17:56:58 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Jun  1 17:56:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src39.csv
[Sat Jun  1 17:56:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:00 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Jun  1 17:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sat Jun  1 17:57:00 2013] fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Jun  1 17:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sat Jun  1 17:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650221401_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 17:57:55 2013] Source 121 is offset by -1.930267 and -4.723893 pixels which is larger than
2 X fitted extent = 1.397306 x 1.397306, not incorporating fit results
[Sat Jun  1 17:57:56 2013] Warning, spatial fit 39 centroid is now closest to src. 108
[Sat Jun  1 17:57:58 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 17:57:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 17:57:58 2013] Assessing source extent using major
[Sat Jun  1 17:57:58 2013] Source does appear to be extended
[Sat Jun  1 17:57:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 09:52:16 2013] Counts = 1903.851929, rescaling region sizes by 2.000000
[Sun Jun  2 09:52:16 2013] XMMSAS src. selection expression = ellipse(9729.542786, 21784.545334, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:16 2013] Not overwriting source region fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src121_src.reg
[Sun Jun  2 09:52:16 2013] Extracting stamp from image fullrun_mos1_xmm0650221401_pi300-10000_cl_sm2.00.img.gz, (37, 176) - (187, 326)
[Sun Jun  2 09:52:16 2013] XMMSAS bgd. selection expression = annulus(9729.542786, 21784.545334, 4350.000000, 8700.000000, X, Y) && !ellipse(19374.494000, 21314.720000, 1515.488044, 1515.488044, 0.000000, X, Y) && !ellipse(10876.376000, 21199.790000, 6086.952175, 6086.952175, -0.000000, X, Y) && !ellipse(16767.047000, 15718.288000, 1343.288039, 1343.288039, 0.000000, X, Y) && !ellipse(18914.650000, 24901.982000, 1580.808045, 1580.808045, 0.000000, X, Y) && !ellipse(10449.451988, 20648.819382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12238.016000, 22732.206000, 5949.192171, 5394.120155, 86.584000, X, Y) && !ellipse(17522.742752, 14919.572815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11513.025528, 21701.854446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11471.754425, 25160.068604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16993.076355, 16574.756577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18821.512000, 24709.968000, 1475.608042, 1475.608042, 0.000000, X, Y) && !ellipse(10735.669456, 19541.876602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11121.414017, 24731.076935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11952.309418, 25778.223145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18347.227585, 20216.204926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17860.034000, 19590.010000, 1000.720029, 1000.720029, 0.000000, X, Y) && !ellipse(16726.428000, 16170.854000, 1889.728054, 1096.408032, 136.148000, X, Y) && !ellipse(15789.624000, 15382.881200, 1325.368038, 859.960025, 323.665000, X, Y) && !ellipse(18996.170000, 17774.168200, 1739.200050, 1739.200050, 0.000000, X, Y) && !ellipse(15775.754715, 21606.306580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12871.005310, 21409.908752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14729.347931, 14910.849716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15341.220673, 14564.267502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15867.127548, 14661.776108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17542.336000, 16916.746000, 1889.728054, 1889.728054, 0.000000, X, Y) && !ellipse(18769.224579, 15867.707672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18565.832077, 17783.215729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17042.025803, 19597.310959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17979.075912, 19099.150467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12816.453751, 23760.297333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10250.946068, 23686.543274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13238.477295, 18649.729675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15953.585922, 17268.770615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18922.678635, 19906.737366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16414.096771, 19926.631500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17102.628174, 20069.426941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15202.700000, 21782.144200, 830.024024, 830.024024, 0.000000, X, Y) && !ellipse(16437.695999, 18443.838791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13874.563904, 15681.351166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17094.360413, 17863.194504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15057.424591, 13075.447876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13318.436157, 19166.674500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15603.815018, 16474.253098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16209.615707, 22877.993927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12129.917603, 19349.866211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15654.208801, 12911.243607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17984.886000, 14604.788000, 1950.760056, 1950.760056, 0.000000, X, Y) && !ellipse(15478.127258, 20051.020950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17023.087479, 18828.891052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14438.654083, 19647.729965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18723.178406, 16823.093414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17118.387100, 18428.105087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18586.165619, 19007.605057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12209.983994, 18666.299713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10546.276924, 18429.102051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18037.233002, 12492.557434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17795.122208, 12892.115448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11103.539032, 17299.249023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18934.074020, 13772.940002, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 09:52:16 2013] Writing fullrun_mos1_xmm0650221401_pi300-10000_pass1_cl_src121.gif