[Mon Jun  3 16:13:23 2013] Detection parameters:
  Position = (125.6, 380.9) = 8 23 3.69 -42 52 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1475.9 +/- 65.8
  Background counts = 802.8
  Rate = 0.07 +/- 0.003

[Mon Jun  3 16:13:54 2013] Off-axis axis estimate = 13.88'
[Mon Jun  3 16:17:26 2013] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:17:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun  3 16:17:26 2013] Initial guess for spatial extent in simple fitting = 13.37"
[Mon Jun  3 16:17:26 2013] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.881
[Mon Jun  3 16:17:26 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 13.37"
[Mon Jun  3 16:17:27 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jun  3 16:17:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src18.csv
[Mon Jun  3 16:17:27 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jun  3 16:17:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src18.csv
[Mon Jun  3 16:17:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:17:30 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jun  3 16:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun  3 16:17:30 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jun  3 16:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun  3 16:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:19:00 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 87 at 17.911259 pixels away
[Mon Jun  3 16:19:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:19:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:19:03 2013] Assessing source extent using major
[Mon Jun  3 16:19:03 2013] Source does appear to be extended
[Mon Jun  3 16:19:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:19:04 2013] Source is confused with source 98
[Mon Jun  3 16:20:50 2013] Using EEF radius (= 13.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:20:50 2013] Initial guess for spatial extent in simple fitting = 13.37"
[Mon Jun  3 16:20:50 2013] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.881
[Mon Jun  3 16:20:50 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 13.37"
[Mon Jun  3 16:20:51 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jun  3 16:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src18.csv
[Mon Jun  3 16:20:51 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jun  3 16:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src18.csv
[Mon Jun  3 16:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:20:54 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jun  3 16:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun  3 16:20:54 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jun  3 16:20:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun  3 16:20:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:22:19 2013] Warning, spatial fit 18 centroid is now closest to src. 112
[Mon Jun  3 16:22:21 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:22:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:22:21 2013] Assessing source extent using major
[Mon Jun  3 16:22:21 2013] Source does appear to be extended
[Mon Jun  3 16:22:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:26:26 2013] Counts = 1475.904419, rescaling region sizes by 2.000000
[Mon Jun  3 16:26:26 2013] XMMSAS src. selection expression = ellipse(10880.814598, 33088.602051, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun  3 16:26:26 2013] Not overwriting source region fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src87_src.reg
[Mon Jun  3 16:26:26 2013] Extracting stamp from image fullrun_mos2_xmm0650221301_pi300-10000_cl_sm2.00.img.gz, (51, 306) - (201, 456)
[Mon Jun  3 16:26:27 2013] XMMSAS bgd. selection expression = annulus(10880.814598, 33088.602051, 4350.000000, 8700.000000, X, Y) && !ellipse(15572.860400, 35868.314000, 6029.424173, 6029.424173, 0.000000, X, Y) && !ellipse(15497.728012, 36312.819183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15529.284363, 34242.910553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16493.497400, 35517.376400, 928.496027, 928.496027, 0.000000, X, Y) && !ellipse(11554.294000, 29177.168000, 2050.560059, 2050.560059, 0.000000, X, Y) && !ellipse(9879.791557, 28323.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10644.120064, 29974.499603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17811.490000, 32585.012000, 1713.656049, 1713.656049, 0.000000, X, Y) && !ellipse(16856.780557, 25222.303219, 3325.776096, 1798.128575, 53.577720, X, Y) && !ellipse(17827.180000, 38346.296000, 2043.712059, 2043.712059, 0.000000, X, Y) && !ellipse(9513.586685, 29447.659485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10521.001800, 30539.174000, 2082.008060, 2082.008060, 0.000000, X, Y) && !ellipse(9491.253242, 30137.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17538.391495, 38645.506683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17952.909271, 37110.841339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17252.998000, 24988.648000, 1629.432047, 1629.432047, 0.000000, X, Y) && !ellipse(11302.010437, 33604.925598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18329.274277, 37713.304657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11164.224000, 22248.462000, 2711.096078, 2711.096078, 0.000000, X, Y) && !ellipse(10999.142616, 29451.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11798.661000, 26830.923200, 1958.280056, 1958.280056, 0.000000, X, Y) && !ellipse(10253.648000, 21045.050000, 12073.392347, 12073.392347, 0.000000, X, Y) && !ellipse(18392.429459, 31891.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12046.016000, 26788.434000, 1913.360055, 1913.360055, 0.000000, X, Y) && !ellipse(10711.737800, 32631.155800, 2142.512062, 758.895222, 127.542000, X, Y) && !ellipse(18237.339905, 32745.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14239.670258, 26382.385681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17805.837906, 36575.229004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13752.314407, 26217.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15884.155579, 25687.418488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13258.371429, 26924.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21033.131800, 32846.626600, 1588.432046, 1588.432046, 0.000000, X, Y) && !ellipse(18176.077759, 39164.618011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10995.236000, 22657.588000, 1752.728050, 1752.728050, 359.606443, X, Y) && !ellipse(17516.222000, 37092.972992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17866.709763, 24372.586914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14259.458191, 36140.207764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13909.952789, 36573.081085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10859.010170, 31526.889923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16307.837189, 38745.935822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10514.534058, 26645.464569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15761.299408, 38587.411987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12665.780838, 26681.100372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.644000, 32645.334000, 1773.296051, 1773.296051, 0.000000, X, Y) && !ellipse(17095.246000, 35662.136000, 1233.728036, 1233.728036, 0.000000, X, Y) && !ellipse(13685.495285, 28561.296539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15289.368000, 26463.024000, 1697.504049, 1697.504049, 0.000000, X, Y) && !ellipse(12976.967529, 29348.584412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18719.984000, 33294.212000, 1713.656049, 1713.656049, 0.000000, X, Y) && !ellipse(11078.796814, 31097.192017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10315.065689, 27196.776093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14432.190414, 38120.944580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14934.979950, 28656.553680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16587.249817, 31790.916656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.956543, 26215.647186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10079.766373, 31693.381500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16180.697128, 38208.504791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.505432, 32331.411591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11344.540024, 28418.774567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16182.962000, 32192.340000, 1773.296051, 1773.296051, 0.000000, X, Y) && !ellipse(14713.624847, 37608.685883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19369.166946, 32574.912292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18802.226593, 29034.356384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18538.564926, 36828.659515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15108.968002, 25889.094513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16110.200790, 31629.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19474.453461, 34041.446930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14861.579010, 29049.925476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10468.830383, 24975.867981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11216.406982, 27578.449829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15721.221741, 38049.341095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16930.614000, 36733.062000, 1960.672056, 1960.672056, 0.000000, X, Y) && !ellipse(16128.187286, 31119.271240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17425.409378, 35112.796387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9912.980751, 24502.502808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10996.870575, 25054.788727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11300.474503, 31878.877777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15575.172562, 33006.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16908.338440, 38924.613983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19113.429214, 35092.119019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19608.103653, 35893.746704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8403.755234, 24169.936493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19980.548508, 34223.475739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19090.654373, 36983.083984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14224.958740, 37178.069336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19210.524963, 34588.913971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19350.957428, 36500.811188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14211.708817, 28045.979248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14357.501785, 27296.044983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15081.240204, 37771.481659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11484.290146, 24657.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10986.577026, 24651.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.422104, 35088.956879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19787.202637, 34847.447449, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 16:26:27 2013] Writing fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src87.gif