[Mon Jun  3 16:13:18 2013] Detection parameters:
  Position = (307.0, 420.0) = 8 21 51.92 -42 49 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1652.6 +/- 61.3
  Background counts = 446.3
  Rate = 0.08 +/- 0.003

[Mon Jun  3 16:13:54 2013] Off-axis axis estimate = 8.84'
[Mon Jun  3 16:17:26 2013] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:17:26 2013] Initial guess for spatial extent in simple fitting = 10.85"
[Mon Jun  3 16:17:26 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Mon Jun  3 16:17:26 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.85"
[Mon Jun  3 16:17:27 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jun  3 16:17:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src14.csv
[Mon Jun  3 16:17:27 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jun  3 16:17:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src14.csv
[Mon Jun  3 16:17:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:17:30 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jun  3 16:17:30 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jun  3 16:17:30 2013] Fit fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Jun  3 16:19:00 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 14.845113 pixels away
[Mon Jun  3 16:19:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:19:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:19:03 2013] Assessing source extent using major
[Mon Jun  3 16:19:03 2013] Source does appear to be extended
[Mon Jun  3 16:19:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:19:04 2013] Source is confused with source 47
[Mon Jun  3 16:20:50 2013] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:20:50 2013] Initial guess for spatial extent in simple fitting = 10.85"
[Mon Jun  3 16:20:50 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Mon Jun  3 16:20:50 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 10.85"
[Mon Jun  3 16:20:51 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src14.ximg exists
[Mon Jun  3 16:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src14.csv
[Mon Jun  3 16:20:51 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Jun  3 16:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src14.csv
[Mon Jun  3 16:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:20:53 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Jun  3 16:20:54 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jun  3 16:20:54 2013] Fit fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Jun  3 16:22:19 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 14.845113 pixels away
[Mon Jun  3 16:22:21 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:22:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:22:21 2013] Assessing source extent using major
[Mon Jun  3 16:22:21 2013] Source does appear to be extended
[Mon Jun  3 16:22:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:26:24 2013] Counts = 1652.552002, rescaling region sizes by 2.000000
[Mon Jun  3 16:26:24 2013] XMMSAS src. selection expression = ellipse(26658.381287, 36491.473450, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun  3 16:26:24 2013] Not overwriting source region fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src39_src.reg
[Mon Jun  3 16:26:24 2013] Extracting stamp from image fullrun_mos2_xmm0650221301_pi300-10000_cl_sm2.00.img.gz, (232, 345) - (382, 495)
[Mon Jun  3 16:26:25 2013] XMMSAS bgd. selection expression = annulus(26658.381287, 36491.473450, 4350.000000, 8700.000000, X, Y) && !ellipse(15572.860400, 35868.314000, 6029.424173, 6029.424173, 0.000000, X, Y) && !ellipse(24005.652000, 41413.672000, 2008.456058, 2008.456058, 0.000000, X, Y) && !ellipse(30597.109283, 30327.252106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30851.269928, 29622.121460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30297.122833, 30920.343170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30774.576000, 30789.490000, 1545.232044, 1545.232044, 0.000000, X, Y) && !ellipse(25635.810028, 33361.613403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31328.458000, 29710.294400, 1471.856042, 1471.856042, 0.000000, X, Y) && !ellipse(31322.885200, 30707.490000, 822.184024, 822.184024, 0.000000, X, Y) && !ellipse(30477.220000, 31624.150000, 1547.320045, 1547.320045, 0.000000, X, Y) && !ellipse(35988.204681, 32667.432098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31549.449707, 29446.886871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17811.490000, 32585.012000, 1713.656049, 1713.656049, 0.000000, X, Y) && !ellipse(34071.724884, 32234.935791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30895.680200, 32022.824000, 1096.504032, 1096.504032, 0.000000, X, Y) && !ellipse(32965.090400, 31728.759600, 2089.296060, 1093.616031, 0.000000, X, Y) && !ellipse(31442.709564, 31347.922363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16856.780557, 25222.303219, 3325.776096, 1798.128575, 53.577720, X, Y) && !ellipse(17827.180000, 38346.296000, 2043.712059, 2043.712059, 0.000000, X, Y) && !ellipse(35526.218964, 32750.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34993.270000, 32993.430000, 10298.592296, 10298.592296, 0.000000, X, Y) && !ellipse(30062.696000, 31627.963960, 842.224024, 842.224024, 0.000000, X, Y) && !ellipse(32022.143200, 31402.302000, 778.738422, 778.738422, 0.000000, X, Y) && !ellipse(17538.391495, 38645.506683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34286.292000, 32559.466000, 1716.432049, 1716.432049, 0.000000, X, Y) && !ellipse(25571.382000, 36253.930200, 1248.104036, 1248.104036, 0.000000, X, Y) && !ellipse(17952.909271, 37110.841339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25577.280000, 33821.735480, 3101.520089, 3101.520089, 0.000000, X, Y) && !ellipse(18329.274277, 37713.304657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24730.270000, 40360.580000, 1434.960041, 1434.960041, 0.000000, X, Y) && !ellipse(25575.461212, 36561.890137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10253.648000, 21045.050000, 12073.392347, 12073.392347, 0.000000, X, Y) && !ellipse(18392.429459, 31891.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32080.190063, 27964.137970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18237.339905, 32745.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32271.754000, 31642.888200, 1557.480045, 1557.480045, 0.000000, X, Y) && !ellipse(17805.837906, 36575.229004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.940000, 38487.544000, 1843.120053, 1843.120053, 0.000000, X, Y) && !ellipse(31058.768433, 28847.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21033.131800, 32846.626600, 1588.432046, 1588.432046, 0.000000, X, Y) && !ellipse(26439.984000, 33817.708600, 1550.760045, 1550.760045, 0.000000, X, Y) && !ellipse(18176.077759, 39164.618011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17516.222000, 37092.972992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30572.539642, 32218.469299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.786020, 37132.590800, 1123.904032, 1123.904032, 0.000000, X, Y) && !ellipse(17200.644000, 32645.334000, 1773.296051, 1773.296051, 0.000000, X, Y) && !ellipse(32333.835632, 30132.410126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25197.622000, 39347.176000, 2962.640085, 2962.640085, 0.000000, X, Y) && !ellipse(17095.246000, 35662.136000, 1233.728036, 1233.728036, 0.000000, X, Y) && !ellipse(26242.855927, 35624.837372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30713.923400, 32816.800000, 523.010415, 523.010415, 0.000000, X, Y) && !ellipse(23067.095734, 39268.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18719.984000, 33294.212000, 1713.656049, 1713.656049, 0.000000, X, Y) && !ellipse(23367.830902, 38668.576233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.505432, 32331.411591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.623566, 34920.697052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19369.166946, 32574.912292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30488.579651, 38928.378815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27017.572235, 35994.048401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18802.226593, 29034.356384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18538.564926, 36828.659515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20914.184250, 34142.762848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24082.405487, 33268.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19474.453461, 34041.446930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26552.782806, 33118.179077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.942000, 38891.614000, 1926.032055, 1926.032055, 0.000000, X, Y) && !ellipse(16930.614000, 36733.062000, 1960.672056, 1960.672056, 0.000000, X, Y) && !ellipse(27160.282715, 33271.408783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31949.438000, 28921.302000, 786.312023, 786.312023, 0.000000, X, Y) && !ellipse(33420.924103, 28488.020386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17425.409378, 35112.796387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29354.109528, 33873.210999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.086823, 39176.090393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.092133, 35176.041840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32720.256561, 27553.099609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21281.433212, 29899.354309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19113.429214, 35092.119019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19608.103653, 35893.746704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24901.359894, 35540.391510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29913.792358, 33702.625366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19980.548508, 34223.475739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.487335, 36223.610199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29570.791779, 32329.011444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19090.654373, 36983.083984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32316.283234, 30499.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30151.205078, 38327.622681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33615.073120, 34179.986359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20995.848969, 33414.172363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22396.132660, 30357.097290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30042.030273, 37893.875854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19210.524963, 34588.913971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19350.957428, 36500.811188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34023.687439, 33969.954956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34510.978241, 29951.682281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27580.653503, 35799.036499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31429.243256, 38042.326508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29501.447723, 39366.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29206.508484, 34927.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23575.663940, 33068.081329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.422104, 35088.956879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22450.189056, 32009.197235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.442322, 33379.136597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.524475, 30832.820129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19787.202637, 34847.447449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.265686, 33865.681335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23088.872284, 32501.219299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23746.469940, 32589.974274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28765.598389, 35211.704193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24067.739105, 32133.136658, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 16:26:25 2013] Writing fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src39.gif