[Mon Jun  3 16:13:34 2013] Detection parameters:
  Position = (146.1, 307.2) = 8 22 55.65 -42 57 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 637.8 +/- 55.5
  Background counts = 924.9
  Rate = 0.03 +/- 0.003

[Mon Jun  3 16:13:54 2013] Off-axis axis estimate = 11.06'
[Mon Jun  3 16:17:26 2013] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:17:26 2013] Initial guess for spatial extent in simple fitting = 11.96"
[Mon Jun  3 16:17:26 2013] source mask rpix=2.7, npix_max = 42, mask sum = 33, frac = 0.782
[Mon Jun  3 16:17:26 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 11.96"
[Mon Jun  3 16:17:29 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src95.ximg exists
[Mon Jun  3 16:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src95.csv
[Mon Jun  3 16:17:29 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src95_1.ximg exists
[Mon Jun  3 16:17:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src95.csv
[Mon Jun  3 16:17:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:17:34 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Mon Jun  3 16:17:34 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Mon Jun  3 16:17:34 2013] Fit fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Mon Jun  3 16:19:02 2013] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 197 at 10.344254 pixels away
[Mon Jun  3 16:19:02 2013] Spatial fit model total counts = 13644.800000, observed total counts = 12068.000000
[Mon Jun  3 16:19:02 2013] Poor agreement between spatial fit and data for source 197
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 16:19:03 2013] Warning, spatial fit 95 centroid is now closest to src. 207
[Mon Jun  3 16:19:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:19:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:19:03 2013] Assessing source extent using major
[Mon Jun  3 16:19:03 2013] Source does appear to be extended
[Mon Jun  3 16:19:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:19:04 2013] Source is confused with source 195
[Mon Jun  3 16:20:50 2013] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:20:50 2013] Initial guess for spatial extent in simple fitting = 11.96"
[Mon Jun  3 16:20:50 2013] source mask rpix=2.7, npix_max = 42, mask sum = 33, frac = 0.782
[Mon Jun  3 16:20:50 2013] Giving source the simple spatial ID 93 for pass 1, mean size = 11.96"
[Mon Jun  3 16:20:53 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src93.ximg exists
[Mon Jun  3 16:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src93.csv
[Mon Jun  3 16:20:53 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src93_1.ximg exists
[Mon Jun  3 16:20:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src93.csv
[Mon Jun  3 16:20:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:20:56 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Mon Jun  3 16:20:56 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Mon Jun  3 16:20:56 2013] Fit fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly
[Mon Jun  3 16:22:21 2013] Warning, spatial fit 93 centroid is now closest to src. 199
[Mon Jun  3 16:22:22 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:22:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:22:22 2013] Assessing source extent using major
[Mon Jun  3 16:22:22 2013] Source does appear to be extended
[Mon Jun  3 16:22:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:26:43 2013] XMMSAS src. selection expression = ellipse(12665.780838, 26681.100372, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun  3 16:26:43 2013] Not overwriting source region fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src197_src.reg
[Mon Jun  3 16:26:43 2013] Extracting stamp from image fullrun_mos2_xmm0650221301_pi300-10000_cl_sm2.00.img.gz, (109, 270) - (184, 345)
[Mon Jun  3 16:26:43 2013] XMMSAS bgd. selection expression = annulus(12665.780838, 26681.100372, 1087.500000, 2175.000000, X, Y) && !ellipse(11554.294000, 29177.168000, 2050.560059, 2050.560059, 0.000000, X, Y) && !ellipse(9879.791557, 28323.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16856.780557, 25222.303219, 3325.776096, 1798.128575, 53.577720, X, Y) && !ellipse(10521.001800, 30539.174000, 2082.008060, 2082.008060, 0.000000, X, Y) && !ellipse(11164.224000, 22248.462000, 2711.096078, 2711.096078, 0.000000, X, Y) && !ellipse(10999.142616, 29451.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11798.661000, 26830.923200, 1958.280056, 1958.280056, 0.000000, X, Y) && !ellipse(10253.648000, 21045.050000, 12073.392347, 12073.392347, 0.000000, X, Y) && !ellipse(12046.016000, 26788.434000, 1913.360055, 1913.360055, 0.000000, X, Y) && !ellipse(14239.670258, 26382.385681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13752.314407, 26217.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13258.371429, 26924.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10514.534058, 26645.464569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13685.495285, 28561.296539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15289.368000, 26463.024000, 1697.504049, 1697.504049, 0.000000, X, Y) && !ellipse(12976.967529, 29348.584412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10315.065689, 27196.776093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14934.979950, 28656.553680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11344.540024, 28418.774567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15108.968002, 25889.094513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14861.579010, 29049.925476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10468.830383, 24975.867981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11216.406982, 27578.449829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9912.980751, 24502.502808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10996.870575, 25054.788727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14211.708817, 28045.979248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14357.501785, 27296.044983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11484.290146, 24657.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10986.577026, 24651.917236, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 16:26:43 2013] Writing fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src197.gif