[Mon Jun  3 16:13:27 2013] Detection parameters:
  Position = (204.2, 370.1) = 8 22 32.58 -42 53 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1375.2 +/- 63.7
  Background counts = 752.8
  Rate = 0.06 +/- 0.003

[Mon Jun  3 16:13:54 2013] Off-axis axis estimate = 8.58'
[Mon Jun  3 16:17:26 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:17:26 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Mon Jun  3 16:17:26 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Mon Jun  3 16:17:26 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 10.72"
[Mon Jun  3 16:17:27 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src23.ximg exists
[Mon Jun  3 16:17:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src23.csv
[Mon Jun  3 16:17:27 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Jun  3 16:17:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src23.csv
[Mon Jun  3 16:17:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:17:31 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Jun  3 16:17:31 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Jun  3 16:17:31 2013] Fit fullrun_mos2_xmm0650221301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Jun  3 16:19:01 2013] Warning, spatial fit 23 centroid is now closest to src. 85
[Mon Jun  3 16:19:02 2013] Spatial fit model total counts = 11814.800000, observed total counts = 11794.000000
[Mon Jun  3 16:19:02 2013] Offset between fit and detection position for source 130 = 5.143633 pixels
[Mon Jun  3 16:19:02 2013] Warning, changing simple spatial fit ID from 23 to 63
[Mon Jun  3 16:19:02 2013] 11581.830000 total counts/ 9530.990000 bgd. counts: snr = 21.006939
Spatial fit parameters:
  Offset between fit and detection position for source 130 = 5.143633 pixels
  Position = (205.3, 375.1) = 8 22 32.17 -42 53 4.0
  Extent = 21.4 (21.4-42.8)", rotation angle = 0
  Source counts = 2050.8 +/- 107.6
  Background counts = 9531.0
  Rate = 0.1 +/- 0.006
[Mon Jun  3 16:19:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:19:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:19:03 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 16:19:03 2013] Source does appear to be extended
[Mon Jun  3 16:19:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:19:04 2013] Source is confused with source 111
[Mon Jun  3 16:19:04 2013] Source is confused with source 85
[Mon Jun  3 16:19:04 2013] Source is confused with source 97
[Mon Jun  3 16:20:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  3 16:20:50 2013] Initial guess for spatial extent in simple fitting = 21.42"
[Mon Jun  3 16:20:50 2013] source mask rpix=4.9, npix_max = 117, mask sum = 121, frac = 1.028
[Mon Jun  3 16:20:50 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 21.42"
[Mon Jun  3 16:20:51 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src23.ximg exists
[Mon Jun  3 16:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src23.csv
[Mon Jun  3 16:20:51 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Jun  3 16:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src23.csv
[Mon Jun  3 16:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 16:20:54 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Jun  3 16:20:54 2013] fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Jun  3 16:20:54 2013] Fit fullrun_mos2_xmm0650221301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Jun  3 16:22:19 2013] Warning, spatial fit 23 centroid is now closest to src. 111
[Mon Jun  3 16:22:21 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 16:22:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 16:22:21 2013] Assessing source extent using major axis lower bound
[Mon Jun  3 16:22:21 2013] Source does appear to be extended
[Mon Jun  3 16:22:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 16:26:28 2013] Counts = 2050.840000, rescaling region sizes by 2.000000
[Mon Jun  3 16:26:28 2013] XMMSAS src. selection expression = ellipse(17811.490000, 32585.012000, 2570.484074, 2570.484074, 0.000000, X, Y)
[Mon Jun  3 16:26:28 2013] Not overwriting source region fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src130_src.reg
[Mon Jun  3 16:26:28 2013] Extracting stamp from image fullrun_mos2_xmm0650221301_pi300-10000_cl_sm2.00.img.gz, (58, 227) - (353, 523)
[Mon Jun  3 16:26:29 2013] XMMSAS bgd. selection expression = annulus(17811.490000, 32585.012000, 8568.280247, 17136.560493, X, Y) && !ellipse(25428.207977, 23958.006744, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(15572.860400, 35868.314000, 6029.424173, 6029.424173, 0.000000, X, Y) && !ellipse(15497.728012, 36312.819183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24005.652000, 41413.672000, 2008.456058, 2008.456058, 0.000000, X, Y) && !ellipse(30597.109283, 30327.252106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30851.269928, 29622.121460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15529.284363, 34242.910553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16493.497400, 35517.376400, 928.496027, 928.496027, 0.000000, X, Y) && !ellipse(30297.122833, 30920.343170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30774.576000, 30789.490000, 1545.232044, 1545.232044, 0.000000, X, Y) && !ellipse(24875.457428, 22993.575317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25635.810028, 33361.613403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31328.458000, 29710.294400, 1471.856042, 1471.856042, 0.000000, X, Y) && !ellipse(26658.381287, 36491.473450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31322.885200, 30707.490000, 822.184024, 822.184024, 0.000000, X, Y) && !ellipse(30477.220000, 31624.150000, 1547.320045, 1547.320045, 0.000000, X, Y) && !ellipse(11554.294000, 29177.168000, 2050.560059, 2050.560059, 0.000000, X, Y) && !ellipse(10880.814598, 33088.602051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9879.791557, 28323.894440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31549.449707, 29446.886871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10644.120064, 29974.499603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34071.724884, 32234.935791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30895.680200, 32022.824000, 1096.504032, 1096.504032, 0.000000, X, Y) && !ellipse(32965.090400, 31728.759600, 2089.296060, 1093.616031, 0.000000, X, Y) && !ellipse(31442.709564, 31347.922363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16856.780557, 25222.303219, 3325.776096, 1798.128575, 53.577720, X, Y) && !ellipse(17827.180000, 38346.296000, 2043.712059, 2043.712059, 0.000000, X, Y) && !ellipse(35526.218964, 32750.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9513.586685, 29447.659485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34993.270000, 32993.430000, 10298.592296, 10298.592296, 0.000000, X, Y) && !ellipse(10521.001800, 30539.174000, 2082.008060, 2082.008060, 0.000000, X, Y) && !ellipse(30062.696000, 31627.963960, 842.224024, 842.224024, 0.000000, X, Y) && !ellipse(32022.143200, 31402.302000, 778.738422, 778.738422, 0.000000, X, Y) && !ellipse(9491.253242, 30137.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9576.206000, 21007.572000, 2121.672061, 2121.672061, 0.000000, X, Y) && !ellipse(17538.391495, 38645.506683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34286.292000, 32559.466000, 1716.432049, 1716.432049, 0.000000, X, Y) && !ellipse(25788.622894, 24819.808014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25571.382000, 36253.930200, 1248.104036, 1248.104036, 0.000000, X, Y) && !ellipse(17952.909271, 37110.841339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17252.998000, 24988.648000, 1629.432047, 1629.432047, 0.000000, X, Y) && !ellipse(11302.010437, 33604.925598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25577.280000, 33821.735480, 3101.520089, 3101.520089, 0.000000, X, Y) && !ellipse(18329.274277, 37713.304657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9823.826000, 21187.108000, 2095.160060, 2095.160060, 0.000000, X, Y) && !ellipse(24730.270000, 40360.580000, 1434.960041, 1434.960041, 0.000000, X, Y) && !ellipse(11164.224000, 22248.462000, 2711.096078, 2711.096078, 0.000000, X, Y) && !ellipse(10999.142616, 29451.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11798.661000, 26830.923200, 1958.280056, 1958.280056, 0.000000, X, Y) && !ellipse(10487.067780, 21681.466476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.461212, 36561.890137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10253.648000, 21045.050000, 12073.392347, 12073.392347, 0.000000, X, Y) && !ellipse(18392.429459, 31891.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33718.862000, 23102.640740, 1024.584029, 1024.584029, 0.000000, X, Y) && !ellipse(12046.016000, 26788.434000, 1913.360055, 1913.360055, 0.000000, X, Y) && !ellipse(32080.190063, 27964.137970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15690.783157, 15528.911331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10711.737800, 32631.155800, 2142.512062, 758.895222, 127.542000, X, Y) && !ellipse(18237.339905, 32745.479340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32271.754000, 31642.888200, 1557.480045, 1557.480045, 0.000000, X, Y) && !ellipse(14239.670258, 26382.385681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17805.837906, 36575.229004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13752.314407, 26217.975647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.940000, 38487.544000, 1843.120053, 1843.120053, 0.000000, X, Y) && !ellipse(15884.155579, 25687.418488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31058.768433, 28847.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13258.371429, 26924.452393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21033.131800, 32846.626600, 1588.432046, 1588.432046, 0.000000, X, Y) && !ellipse(26810.238342, 15687.151077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14442.288818, 16778.483612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.984000, 33817.708600, 1550.760045, 1550.760045, 0.000000, X, Y) && !ellipse(18176.077759, 39164.618011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16899.878189, 19856.725906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10995.236000, 22657.588000, 1752.728050, 1752.728050, 359.606443, X, Y) && !ellipse(34340.153656, 23359.831299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17516.222000, 37092.972992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17866.709763, 24372.586914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30572.539642, 32218.469299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14259.458191, 36140.207764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13909.952789, 36573.081085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10859.010170, 31526.889923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16307.837189, 38745.935822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10514.534058, 26645.464569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25090.786020, 37132.590800, 1123.904032, 1123.904032, 0.000000, X, Y) && !ellipse(24459.119629, 23791.443481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15761.299408, 38587.411987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12665.780838, 26681.100372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34054.796417, 24136.873413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.644000, 32645.334000, 1773.296051, 1773.296051, 0.000000, X, Y) && !ellipse(32333.835632, 30132.410126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25197.622000, 39347.176000, 2962.640085, 2962.640085, 0.000000, X, Y) && !ellipse(27164.931671, 16469.971863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17095.246000, 35662.136000, 1233.728036, 1233.728036, 0.000000, X, Y) && !ellipse(13685.495285, 28561.296539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.855927, 35624.837372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15289.368000, 26463.024000, 1697.504049, 1697.504049, 0.000000, X, Y) && !ellipse(30713.923400, 32816.800000, 523.010415, 523.010415, 0.000000, X, Y) && !ellipse(15879.088455, 19501.241379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23067.095734, 39268.063263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12976.967529, 29348.584412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16304.097580, 14913.859192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18719.984000, 33294.212000, 1713.656049, 1713.656049, 0.000000, X, Y) && !ellipse(11078.796814, 31097.192017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.200836, 24216.041077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33077.690000, 24084.902200, 1555.568045, 1555.568045, 0.000000, X, Y) && !ellipse(10315.065689, 27196.776093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14432.190414, 38120.944580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14934.979950, 28656.553680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27844.905914, 16647.899979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16587.249817, 31790.916656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16015.956543, 26215.647186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10079.766373, 31693.381500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9057.746000, 20310.120000, 2188.064063, 2188.064063, 0.000000, X, Y) && !ellipse(23367.830902, 38668.576233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16180.697128, 38208.504791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.505432, 32331.411591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11344.540024, 28418.774567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16182.962000, 32192.340000, 1773.296051, 1773.296051, 0.000000, X, Y) && !ellipse(25306.623566, 34920.697052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14713.624847, 37608.685883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19369.166946, 32574.912292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30488.579651, 38928.378815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27017.572235, 35994.048401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18802.226593, 29034.356384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11490.323700, 21448.604477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9603.201225, 19534.360214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18538.564926, 36828.659515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20914.184250, 34142.762848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15108.968002, 25889.094513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24082.405487, 33268.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34165.600000, 22992.708400, 2049.168059, 2049.168059, 0.000000, X, Y) && !ellipse(15452.623047, 16199.558456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16110.200790, 31629.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19474.453461, 34041.446930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26552.782806, 33118.179077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34964.773193, 22925.441956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14861.579010, 29049.925476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31656.237640, 26774.408722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8570.815651, 21583.068436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33805.223663, 19937.876877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10468.830383, 24975.867981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11216.406982, 27578.449829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15721.221741, 38049.341095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11545.353165, 22024.455109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34313.138733, 21791.238663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.942000, 38891.614000, 1926.032055, 1926.032055, 0.000000, X, Y) && !ellipse(16930.614000, 36733.062000, 1960.672056, 1960.672056, 0.000000, X, Y) && !ellipse(27160.282715, 33271.408783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14191.371292, 14998.428513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26512.522000, 16232.032000, 701.833620, 701.833620, 0.000000, X, Y) && !ellipse(31949.438000, 28921.302000, 786.312023, 786.312023, 0.000000, X, Y) && !ellipse(16128.187286, 31119.271240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33420.924103, 28488.020386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17425.409378, 35112.796387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29354.109528, 33873.210999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24632.086823, 39176.090393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9912.980751, 24502.502808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.092133, 35176.041840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10996.870575, 25054.788727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11300.474503, 31878.877777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33527.207581, 23331.666748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34739.738220, 21549.948273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33808.606171, 22482.612274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15575.172562, 33006.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27508.181824, 17183.840210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16908.338440, 38924.613983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32720.256561, 27553.099609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21281.433212, 29899.354309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19113.429214, 35092.119019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13692.331985, 14913.079941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19608.103653, 35893.746704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24901.359894, 35540.391510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14395.456757, 21780.323837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12246.304794, 21725.833344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8403.755234, 24169.936493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15731.110397, 16655.010147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14990.953278, 19184.549484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29913.792358, 33702.625366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19980.548508, 34223.475739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18303.673157, 23512.689301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.487335, 36223.610199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29570.791779, 32329.011444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10304.274323, 19613.667267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.000000, 16658.504166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19090.654373, 36983.083984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16748.735336, 19354.051865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32316.283234, 30499.404205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14224.958740, 37178.069336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30151.205078, 38327.622681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33615.073120, 34179.986359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20995.848969, 33414.172363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13410.853745, 22241.803772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22396.132660, 30357.097290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30042.030273, 37893.875854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19210.524963, 34588.913971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27681.507446, 16144.402878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19350.957428, 36500.811188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14211.708817, 28045.979248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12701.121933, 15471.391449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34023.687439, 33969.954956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16220.408401, 16464.000702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34510.978241, 29951.682281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14357.501785, 27296.044983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15318.406006, 19871.961792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15081.240204, 37771.481659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11406.099533, 21047.032623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11484.290146, 24657.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27580.653503, 35799.036499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35790.274902, 20555.933182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34794.356000, 23518.062000, 1615.488046, 1615.488046, 0.000000, X, Y) && !ellipse(18776.843185, 22935.183258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31429.243256, 38042.326508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10986.577026, 24651.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29501.447723, 39366.681671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18146.182129, 17279.177002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12384.799088, 21362.002731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29206.508484, 34927.037262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14632.590698, 23161.237762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17203.949402, 15000.417130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23575.663940, 33068.081329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.422104, 35088.956879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32849.275055, 19545.439651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22450.189056, 32009.197235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.442322, 33379.136597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.524475, 30832.820129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35036.302338, 22137.304474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19787.202637, 34847.447449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28708.265686, 33865.681335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16400.708786, 16885.167999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15156.066895, 23000.653625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12984.587463, 22521.211090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19670.018936, 15619.178345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12225.798676, 18663.401749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23088.872284, 32501.219299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23746.469940, 32589.974274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18238.735123, 17692.590286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34749.269775, 24212.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28765.598389, 35211.704193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24067.739105, 32133.136658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33316.469940, 19720.500336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12478.983597, 19181.664795, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 16:26:29 2013] Writing fullrun_mos2_xmm0650221301_pi300-10000_pass1_cl_src130.gif