[Sun May  5 10:42:23 2013] Detection parameters:
  Position = (293.9, 287.4) = 8 21 54.58 -42 59 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1258.1 +/- 53.9
  Background counts = 342.7
  Rate = 0.06 +/- 0.003

[Sun May  5 10:42:39 2013] Off-axis axis estimate = 0.86'
[Sun May  5 10:44:50 2013] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Sun May  5 10:44:50 2013] Initial guess for spatial extent in simple fitting = 6.86"
[Sun May  5 10:44:50 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.159
[Sun May  5 10:44:50 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 6.86"
[Sun May  5 10:44:52 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_src34.ximg exists
[Sun May  5 10:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_src34.csv
[Sun May  5 10:44:52 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_src34_1.ximg exists
[Sun May  5 10:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_src34.csv
[Sun May  5 10:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:44:55 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sun May  5 10:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun May  5 10:44:55 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sun May  5 10:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Sun May  5 10:44:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221201_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:45:48 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 127 at 15.823227 pixels away
[Sun May  5 10:45:49 2013] Vigneting correction estimate = 1.000000
[Sun May  5 10:45:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 10:45:49 2013] Assessing source extent using major
[Sun May  5 10:45:49 2013] Source does appear to be extended
[Sun May  5 10:45:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:46:53 2013] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Sun May  5 10:46:53 2013] Initial guess for spatial extent in simple fitting = 6.86"
[Sun May  5 10:46:53 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.159
[Sun May  5 10:46:53 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 6.86"
[Sun May  5 10:46:55 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_src33.ximg exists
[Sun May  5 10:46:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_src33.csv
[Sun May  5 10:46:55 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun May  5 10:46:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_src33.csv
[Sun May  5 10:46:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:46:57 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun May  5 10:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sun May  5 10:46:57 2013] fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun May  5 10:46:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sun May  5 10:46:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221201_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:47:42 2013] Source 127 is offset by -6.358596 and -6.572139 pixels which is larger than
2 X fitted extent = 0.788432 x 4.236427, not incorporating fit results
[Sun May  5 10:47:43 2013] Vigneting correction estimate = 1.000000
[Sun May  5 10:47:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 10:47:43 2013] Assessing source extent using major
[Sun May  5 10:47:43 2013] Source does appear to be extended
[Sun May  5 10:47:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 10:49:56 2013] Counts = 1258.054321, rescaling region sizes by 2.000000
[Sun May  5 10:49:56 2013] XMMSAS src. selection expression = ellipse(25525.050171, 24958.166901, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May  5 10:49:56 2013] Not overwriting source region fullrun_mos2_xmm0650221201_pi300-10000_pass1_cl_src127_src.reg
[Sun May  5 10:49:56 2013] Extracting stamp from image fullrun_mos2_xmm0650221201_pi300-10000_cl_sm2.00.img.gz, (219, 212) - (369, 362)
[Sun May  5 10:49:56 2013] XMMSAS bgd. selection expression = annulus(25525.050171, 24958.166901, 4350.000000, 8700.000000, X, Y) && !ellipse(24919.618696, 24063.775200, 363.301610, 363.301610, 0.000000, X, Y) && !ellipse(24860.315442, 33177.107884, 1780.792051, 1060.411561, 0.311652, X, Y) && !ellipse(32245.593079, 23098.287018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26138.141571, 33889.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17148.290000, 24534.662000, 1653.288048, 1653.288048, 0.000000, X, Y) && !ellipse(16037.220000, 25445.340000, 1383.824040, 627.897618, -0.000000, X, Y) && !ellipse(30193.127600, 32597.271200, 1544.632044, 1544.632044, 0.000000, X, Y) && !ellipse(35603.676000, 32801.211400, 1802.056052, 1802.056052, 0.000000, X, Y) && !ellipse(30162.117249, 31835.895508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33291.128000, 32272.258000, 1702.952049, 1702.952049, 0.000000, X, Y) && !ellipse(26251.622000, 33310.826000, 1468.656042, 1468.656042, 0.000000, X, Y) && !ellipse(29265.821838, 31880.205292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16379.702000, 25217.806000, 1693.128049, 1693.128049, 0.000000, X, Y) && !ellipse(8678.040000, 20837.176000, 12570.624362, 11145.264321, 342.988000, X, Y) && !ellipse(15300.508000, 15413.236000, 2021.184058, 2021.184058, 0.000000, X, Y) && !ellipse(34446.784000, 32368.830000, 1771.912051, 1771.912051, 0.000000, X, Y) && !ellipse(29765.020447, 31808.965546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32051.433441, 32088.627747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24446.283800, 33871.890000, 1252.456036, 1252.456036, 0.000000, X, Y) && !ellipse(34852.630066, 32582.718079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24102.259796, 23354.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15415.294000, 26073.900000, 10158.768292, 10158.768292, 0.000000, X, Y) && !ellipse(31270.100800, 32138.698944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31537.916260, 27709.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31742.090668, 28350.035858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.166504, 32874.049133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24857.890000, 34082.564000, 1655.056048, 1655.056048, 0.000000, X, Y) && !ellipse(16588.455200, 25011.248901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33779.232000, 23467.497800, 1599.048046, 1599.048046, 0.000000, X, Y) && !ellipse(31596.897736, 31072.553345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17194.002335, 32499.342194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25960.198853, 16210.309998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27831.081177, 32560.899048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15619.276000, 26057.854000, 1744.248050, 1346.024039, -0.000000, X, Y) && !ellipse(33197.203800, 23618.172000, 1258.448036, 1258.448036, 0.000000, X, Y) && !ellipse(32745.997070, 28848.161835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25254.436310, 32409.987183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17627.871292, 32580.535645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17977.248000, 23994.540000, 1591.368046, 1591.368046, 0.000000, X, Y) && !ellipse(31416.517700, 29081.711487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33122.909400, 23434.790800, 1007.896029, 1007.896029, 0.000000, X, Y) && !ellipse(26527.060883, 32488.339752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31366.372162, 29597.721741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26932.765289, 16717.257309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31924.578796, 29998.527618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25390.121582, 16646.418472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29951.674316, 33097.881378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28342.420000, 32498.227000, 1489.640043, 1489.640043, 0.000000, X, Y) && !ellipse(29266.928986, 33714.750885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16974.301315, 26315.914368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33812.923248, 21534.886292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17570.445663, 32132.820709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26379.802338, 16671.176620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.805481, 24049.684906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34230.816895, 31899.122375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27168.516000, 32419.670000, 2937.312085, 2937.312085, 0.000000, X, Y) && !ellipse(15975.836395, 32041.376190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33337.787170, 31811.936523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27341.350403, 16305.860519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17778.511017, 25067.463837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28787.698853, 34058.917023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16137.027206, 31673.614807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33900.066620, 21951.070099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32086.177155, 31329.870819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31233.124207, 30236.338593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.108765, 17415.002991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32702.855499, 23517.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33199.191986, 20907.776337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32992.638672, 31256.568115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34140.875122, 22743.102509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26737.461334, 16290.663132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33145.803200, 24285.564000, 1542.528044, 192.815206, -0.000000, X, Y) && !ellipse(20382.676590, 32927.664795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23832.397308, 33515.020996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18991.811615, 16120.729309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31568.807526, 27187.387909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18869.714783, 32661.418457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18323.038940, 31938.751343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17447.716934, 25428.616852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27037.958000, 32117.820000, 1468.656042, 640.998418, 126.700300, X, Y) && !ellipse(16210.761353, 19649.376083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20216.479721, 34293.199463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18869.844879, 33613.806671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19091.943390, 34140.487488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28414.399078, 33689.812195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32150.115570, 29566.599487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34024.481293, 24066.785950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23416.062164, 32382.935089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23094.965576, 33018.296875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34525.487976, 21455.030975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22540.040558, 32299.585754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20159.277115, 33623.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32179.535950, 23510.751129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16030.657440, 27629.017517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34770.756927, 23673.581421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33871.716217, 30158.389587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19455.537704, 31979.240540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17700.710693, 17944.848602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19544.005936, 34143.692108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22650.532257, 31272.514221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25251.067078, 17172.701035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17512.325745, 17529.012604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32666.813477, 34434.184174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25518.739166, 15513.707306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22072.966476, 32147.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20458.500244, 32336.918121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33350.034821, 23956.636749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18879.245010, 32051.271484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18049.118240, 25416.318756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16624.789276, 26619.201019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33462.722229, 30758.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17018.064163, 15708.006332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34989.207428, 21093.301819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33293.243744, 34408.563141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32272.284088, 19854.048309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33873.426056, 29775.691010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29251.078000, 34160.532000, 1551.128045, 1551.128045, 0.000000, X, Y) && !ellipse(19570.755356, 33188.104584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23968.361359, 17187.505478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33534.511566, 29250.966949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.470184, 23874.214020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16676.476059, 17851.542908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16582.959290, 20181.761230, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 10:49:56 2013] Writing fullrun_mos2_xmm0650221201_pi300-10000_pass1_cl_src127.gif