[Mon Jun 17 00:53:35 2013] Detection parameters:
  Position = (126.4, 277.8) = 8 23 0.35 -43 0 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1706.4 +/- 126.2
  Background counts = 920.4
  Rate = 0.06 +/- 0.005

[Mon Jun 17 00:54:19 2013] Off-axis axis estimate = 12.56'
[Mon Jun 17 00:57:25 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:57:25 2013] Initial guess for spatial extent in simple fitting = 12.71"
[Mon Jun 17 00:57:25 2013] source mask rpix=2.9, npix_max = 46, mask sum = 35, frac = 0.747
[Mon Jun 17 00:57:25 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 12.71"
[Mon Jun 17 00:57:28 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun 17 00:57:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src26.csv
[Mon Jun 17 00:57:28 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun 17 00:57:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src26.csv
[Mon Jun 17 00:57:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:57:32 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun 17 00:57:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 17 00:57:32 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun 17 00:57:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 17 00:57:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:09 2013] Warning, spatial fit 26 centroid is now closest to src. 329
[Mon Jun 17 00:59:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:59:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:59:10 2013] Assessing source extent using major
[Mon Jun 17 00:59:10 2013] Source does appear to be extended
[Mon Jun 17 00:59:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:59:10 2013] Source is confused with source 148
[Mon Jun 17 01:00:56 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 01:00:56 2013] Initial guess for spatial extent in simple fitting = 12.71"
[Mon Jun 17 01:00:56 2013] source mask rpix=2.9, npix_max = 46, mask sum = 35, frac = 0.747
[Mon Jun 17 01:00:56 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 12.71"
[Mon Jun 17 01:00:57 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src25.ximg exists
[Mon Jun 17 01:00:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src25.csv
[Mon Jun 17 01:00:57 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Jun 17 01:00:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src25.csv
[Mon Jun 17 01:00:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:00 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Jun 17 01:01:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon Jun 17 01:01:00 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Jun 17 01:01:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon Jun 17 01:01:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:02:26 2013] Warning, spatial fit 25 centroid is now closest to src. 329
[Mon Jun 17 01:02:28 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:02:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:02:28 2013] Assessing source extent using major
[Mon Jun 17 01:02:28 2013] Source does appear to be extended
[Mon Jun 17 01:02:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:06:00 2013] Counts = 1706.355835, rescaling region sizes by 2.000000
[Mon Jun 17 01:06:00 2013] XMMSAS src. selection expression = ellipse(10951.752335, 24118.869659, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 17 01:06:00 2013] Not overwriting source region fullrun_mos2_xmm0650221101_pi300-10000_pass1_cl_src145_src.reg
[Mon Jun 17 01:06:00 2013] Extracting stamp from image fullrun_mos2_xmm0650221101_pi300-10000_cl_sm2.00.img.gz, (51, 203) - (201, 353)
[Mon Jun 17 01:06:00 2013] XMMSAS bgd. selection expression = annulus(10951.752335, 24118.869659, 4350.000000, 8700.000000, X, Y) && !ellipse(15242.486000, 35809.306800, 7786.512224, 7786.512224, 0.000000, X, Y) && !ellipse(10268.876808, 24127.333893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9236.740000, 21554.730000, 7892.112227, 7892.112227, 0.000000, X, Y) && !ellipse(14838.252600, 34595.808200, 1962.200056, 956.680028, 81.399920, X, Y) && !ellipse(10671.509400, 23049.086000, 971.328028, 971.328028, 0.000000, X, Y) && !ellipse(12145.010000, 26884.634000, 4032.368116, 1263.144036, 9.263000, X, Y) && !ellipse(15664.610000, 25641.208000, 1472.240042, 296.972809, 0.000000, X, Y) && !ellipse(10116.152000, 22182.500000, 2066.768059, 563.933616, 326.493100, X, Y) && !ellipse(8552.838000, 20905.542000, 10818.408311, 10818.408311, 0.000000, X, Y) && !ellipse(14896.274000, 35798.038000, 9810.960282, 9810.960282, 0.000000, X, Y) && !ellipse(13103.735886, 26332.978241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11348.417694, 24124.190338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17257.004000, 32448.250000, 1697.704049, 1697.704049, 0.000000, X, Y) && !ellipse(16493.138000, 25095.962000, 1622.248047, 1622.248047, 0.000000, X, Y) && !ellipse(13689.836258, 26553.677551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10801.751808, 23481.593597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15375.314000, 26277.732000, 839.392024, 839.392024, 0.000000, X, Y) && !ellipse(15435.536606, 15174.342789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10323.436996, 23531.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(7943.119598, 22110.744888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13164.344894, 26921.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13796.510025, 14661.266342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16776.600000, 24830.554000, 1665.208048, 1665.208048, 0.000000, X, Y) && !ellipse(9085.001236, 19875.380142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15256.530000, 25795.382000, 1780.344051, 1780.344051, 0.000000, X, Y) && !ellipse(14909.510254, 26934.270691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13950.732712, 15342.388885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14003.464249, 26917.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14646.286667, 26322.156342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10949.166336, 21611.171921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18697.846000, 31947.398000, 1697.704049, 1697.704049, 0.000000, X, Y) && !ellipse(13524.224000, 14686.300000, 2156.184062, 2156.184062, 0.000000, X, Y) && !ellipse(13235.064200, 26123.520000, 1883.144054, 1883.144054, 0.000000, X, Y) && !ellipse(18542.982895, 17364.017136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17519.956299, 33248.097626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13253.195450, 22295.923889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16085.940460, 32504.554016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14622.302000, 27371.942000, 1765.440051, 1329.648038, 0.000000, X, Y) && !ellipse(17847.450180, 17171.461136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14415.287170, 30550.245361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17389.954000, 24325.658000, 9733.488280, 9733.488280, 0.000000, X, Y) && !ellipse(15760.386078, 26821.097412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17890.453690, 24087.572174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14269.202000, 27526.326000, 1825.512053, 1825.512053, 0.000000, X, Y) && !ellipse(15605.591232, 16988.333145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19085.692123, 16219.273376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12996.252335, 28827.834930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13672.749817, 21994.426727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20396.862411, 33191.195038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12582.304062, 22482.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11430.592178, 18840.125809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17556.174881, 25238.949524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13870.250809, 28758.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14297.703888, 23353.546844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15281.068329, 19881.060577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11491.161362, 29368.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8128.351700, 24471.542511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12297.554825, 29435.889740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12131.550446, 22056.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16614.552811, 26207.344910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13066.200000, 12541.820000, 3045.088088, 3045.088088, 0.000000, X, Y) && !ellipse(18805.879913, 16907.847260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14137.426407, 29162.790771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19323.327866, 15523.313202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18673.354126, 32662.815002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14423.657150, 20214.395523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18245.465622, 15182.594620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18748.135681, 33277.364014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19722.365494, 32644.001465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14323.614319, 17351.841171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17913.371902, 23491.852631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14105.883331, 22675.407227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19198.149872, 32487.333496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15975.179276, 31492.284271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17432.001816, 17497.530594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13469.118362, 21584.146378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8782.250900, 24657.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13931.092133, 21458.867493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12724.009613, 21993.843948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11812.800903, 19429.975082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9945.043549, 25092.604309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17407.793259, 18311.143082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16121.967880, 19611.148972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14385.392868, 19712.302933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9193.897263, 24986.538544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10708.721573, 24746.592926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14454.423630, 29847.737885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12909.148788, 20332.881516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17026.446091, 15877.121078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9884.135185, 24399.500946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15666.253342, 27443.627441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17046.954865, 26235.005005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13245.694992, 28204.930542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17550.563477, 25597.394409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12233.548706, 21618.518387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9461.750557, 24607.485321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12537.699570, 19939.313248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14062.127121, 24067.638214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13509.210632, 21011.343719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10251.706734, 19777.005997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13694.996307, 16673.878113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17161.710541, 31486.652954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11931.111664, 22993.636383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15844.728394, 17453.328339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15959.651337, 20572.458084, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:06:00 2013] Writing fullrun_mos2_xmm0650221101_pi300-10000_pass1_cl_src145.gif