[Mon Jun 17 00:53:33 2013] Detection parameters:
  Position = (182.0, 295.3) = 8 22 38.31 -42 59 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1935.3 +/- 69.8
  Background counts = 699.8
  Rate = 0.07 +/- 0.003

[Mon Jun 17 00:54:19 2013] Off-axis axis estimate = 8.45'
[Mon Jun 17 00:57:25 2013] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:57:25 2013] Initial guess for spatial extent in simple fitting = 10.65"
[Mon Jun 17 00:57:25 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Mon Jun 17 00:57:25 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.65"
[Mon Jun 17 00:57:28 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun 17 00:57:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 17 00:57:28 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun 17 00:57:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 17 00:57:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:57:32 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun 17 00:57:32 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun 17 00:57:32 2013] Fit fullrun_mos2_xmm0650221101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Jun 17 00:59:08 2013] Warning, spatial fit 21 centroid is now closest to src. 128
[Mon Jun 17 00:59:09 2013] Source 133 is offset by -4.985818 and -1.208910 pixels which is larger than
2 X fitted extent = 1.246106 x 1.246106, not incorporating fit results
[Mon Jun 17 00:59:10 2013] Spatial fit model total counts = 15229.800000, observed total counts = 15229.000000
[Mon Jun 17 00:59:10 2013] Offset between fit and detection position for source 133 = 7.641726 pixels
[Mon Jun 17 00:59:10 2013] Warning, changing simple spatial fit ID from 21 to 87
[Mon Jun 17 00:59:10 2013] 14905.400000 total counts/ 13508.100000 bgd. counts: snr = 12.022437
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 7.641726 pixels
  Position = (174.5, 293.8) = 8 22 41.28 -42 59 12.2
  Extent = 22.3 (22.2-44.5)", rotation angle = 0
  Source counts = 1397.3 +/- 122.1
  Background counts = 13508.1
  Rate = 0.06 +/- 0.005
[Mon Jun 17 00:59:10 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:59:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:59:10 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:59:10 2013] Source does appear to be extended
[Mon Jun 17 00:59:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:59:10 2013] Source is confused with source 127
[Mon Jun 17 00:59:10 2013] Source is confused with source 135
[Mon Jun 17 00:59:10 2013] Source is confused with source 129
[Mon Jun 17 01:00:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 01:00:56 2013] Initial guess for spatial extent in simple fitting = 22.25"
[Mon Jun 17 01:00:56 2013] source mask rpix=5.1, npix_max = 126, mask sum = 121, frac = 0.959
[Mon Jun 17 01:00:56 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 22.25"
[Mon Jun 17 01:00:57 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 17 01:00:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 17 01:00:57 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 17 01:00:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src21.csv
[Mon Jun 17 01:00:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:00 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 17 01:01:00 2013] fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 17 01:01:00 2013] Fit fullrun_mos2_xmm0650221101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Jun 17 01:02:26 2013] Warning, spatial fit 21 centroid is now closest to src. 328
[Mon Jun 17 01:02:27 2013] Spatial fit model total counts = 40046.400000, observed total counts = 38919.000000
[Mon Jun 17 01:02:27 2013] Offset between fit and detection position for source 133 = 7.711307 pixels
[Mon Jun 17 01:02:27 2013] Warning, changing simple spatial fit ID from 21 to 63
[Mon Jun 17 01:02:27 2013] 36942.700000 total counts/ 12565.800000 bgd. counts: snr = 217.462013
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 7.711307 pixels
  Position = (182.0, 295.7) = 8 22 38.31 -42 59 4.0
  Extent = 41.6 (41.6-83.3)", rotation angle = 0
  Source counts = 24376.9 +/- 192.2
  Background counts = 12565.8
  Rate = 1 +/- 0.008
[Mon Jun 17 01:02:27 2013] Spatial fit model total counts = 12186.300000, observed total counts = 12181.000000
[Mon Jun 17 01:02:27 2013] Offset between fit and detection position for source 133 = 1.401459 pixels
[Mon Jun 17 01:02:27 2013] Warning, changing simple spatial fit ID from 63 to 74
[Mon Jun 17 01:02:27 2013] 10964.382000 total counts/ 10226.300000 bgd. counts: snr = 7.298697
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 1.401459 pixels
  Position = (180.6, 295.3) = 8 22 38.85 -42 59 5.6
  Extent = 18.4 (18.1-36.8)" x 3.7 (3.2-4.3)", rotation angle = 0 (357-0) degrees
  Source counts = 738.1 +/- 104.7
  Background counts = 10226.3
  Rate = 0.03 +/- 0.004
[Mon Jun 17 01:02:28 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:02:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:02:28 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:02:28 2013] Source does appear to be extended
[Mon Jun 17 01:02:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.25
[Mon Jun 17 01:02:28 2013] Source is asymmetric
[Mon Jun 17 01:05:58 2013] XMMSAS src. selection expression = ellipse(15664.610000, 25641.208000, 1104.180032, 222.729606, 0.000000, X, Y)
[Mon Jun 17 01:05:58 2013] Not overwriting source region fullrun_mos2_xmm0650221101_pi300-10000_pass1_cl_src133_src.reg
[Mon Jun 17 01:05:58 2013] Extracting stamp from image fullrun_mos2_xmm0650221101_pi300-10000_cl_sm2.00.img.gz, (117, 232) - (244, 359)
[Mon Jun 17 01:05:59 2013] XMMSAS bgd. selection expression = annulus(15664.610000, 25641.208000, 1840.300053, 3680.600106, X, Y) && !ellipse(15242.486000, 35809.306800, 7786.512224, 7786.512224, 0.000000, X, Y) && !ellipse(9236.740000, 21554.730000, 7892.112227, 7892.112227, 0.000000, X, Y) && !ellipse(12145.010000, 26884.634000, 4032.368116, 1263.144036, 9.263000, X, Y) && !ellipse(10116.152000, 22182.500000, 2066.768059, 563.933616, 326.493100, X, Y) && !ellipse(8552.838000, 20905.542000, 10818.408311, 10818.408311, 0.000000, X, Y) && !ellipse(14896.274000, 35798.038000, 9810.960282, 9810.960282, 0.000000, X, Y) && !ellipse(13103.735886, 26332.978241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11348.417694, 24124.190338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16493.138000, 25095.962000, 1622.248047, 1622.248047, 0.000000, X, Y) && !ellipse(13689.836258, 26553.677551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15375.314000, 26277.732000, 839.392024, 839.392024, 0.000000, X, Y) && !ellipse(13164.344894, 26921.539825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16776.600000, 24830.554000, 1665.208048, 1665.208048, 0.000000, X, Y) && !ellipse(15256.530000, 25795.382000, 1780.344051, 1780.344051, 0.000000, X, Y) && !ellipse(14909.510254, 26934.270691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14003.464249, 26917.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14646.286667, 26322.156342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13235.064200, 26123.520000, 1883.144054, 1883.144054, 0.000000, X, Y) && !ellipse(13253.195450, 22295.923889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14622.302000, 27371.942000, 1765.440051, 1329.648038, 0.000000, X, Y) && !ellipse(17389.954000, 24325.658000, 9733.488280, 9733.488280, 0.000000, X, Y) && !ellipse(15760.386078, 26821.097412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17890.453690, 24087.572174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14269.202000, 27526.326000, 1825.512053, 1825.512053, 0.000000, X, Y) && !ellipse(12996.252335, 28827.834930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13672.749817, 21994.426727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12582.304062, 22482.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17556.174881, 25238.949524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13870.250809, 28758.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14297.703888, 23353.546844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11491.161362, 29368.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12297.554825, 29435.889740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12131.550446, 22056.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16614.552811, 26207.344910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14137.426407, 29162.790771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17913.371902, 23491.852631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14105.883331, 22675.407227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13469.118362, 21584.146378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13931.092133, 21458.867493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12724.009613, 21993.843948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14454.423630, 29847.737885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15666.253342, 27443.627441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17046.954865, 26235.005005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13245.694992, 28204.930542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17550.563477, 25597.394409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12233.548706, 21618.518387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14062.127121, 24067.638214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11931.111664, 22993.636383, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:05:59 2013] Writing fullrun_mos2_xmm0650221101_pi300-10000_pass1_cl_src133.gif