[Tue Jun 25 16:37:26 2013] Detection parameters:
  Position = (182.0, 296.0) = 8 22 37.85 -42 59 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.6 +/- 25.6
  Background counts = 125.1
  Rate = 0.05 +/- 0.006

[Tue Jun 25 16:37:34 2013] Off-axis axis estimate = 8.45'
[Tue Jun 25 16:39:11 2013] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 16:39:11 2013] Initial guess for spatial extent in simple fitting = 10.65"
[Tue Jun 25 16:39:11 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Tue Jun 25 16:39:11 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 10.65"
[Tue Jun 25 16:39:13 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_src52.ximg exists
[Tue Jun 25 16:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_src52.csv
[Tue Jun 25 16:39:13 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_src52_1.ximg exists
[Tue Jun 25 16:39:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_src52.csv
[Tue Jun 25 16:39:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:39:17 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Tue Jun 25 16:39:17 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Tue Jun 25 16:39:17 2013] Fit fullrun_mos2_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Tue Jun 25 16:40:10 2013] Spatial fit model total counts = 1501.680000, observed total counts = 1497.000000
[Tue Jun 25 16:40:10 2013] Offset between fit and detection position for source 68 = 0.274702 pixels
[Tue Jun 25 16:40:10 2013] Warning, changing simple spatial fit ID from 52 to 20
[Tue Jun 25 16:40:10 2013] 1495.639000 total counts/ 921.691000 bgd. counts: snr = 18.905139
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.274702 pixels
  Position = (182.2, 295.9) = 8 22 37.74 -42 59 3.7
  Extent = 20.9 (20.9-20.9)", rotation angle = 0
  Source counts = 573.9 +/- 38.7
  Background counts = 921.7
  Rate = 0.2 +/- 0.02
[Tue Jun 25 16:40:11 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 16:40:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 16:40:11 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 16:40:11 2013] Source does appear to be extended
[Tue Jun 25 16:40:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 16:40:11 2013] Source is confused with source 71
[Tue Jun 25 16:41:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 16:41:06 2013] Initial guess for spatial extent in simple fitting = 20.89"
[Tue Jun 25 16:41:06 2013] source mask rpix=4.8, npix_max = 112, mask sum = 110, frac = 0.978
[Tue Jun 25 16:41:06 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 20.89"
[Tue Jun 25 16:41:08 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass1_src48.ximg exists
[Tue Jun 25 16:41:08 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass1_src48_1.ximg exists
[Tue Jun 25 16:41:08 2013] Fit fullrun_mos2_xmm0650220901_pi300-10000_cl_pass1_src48 appears to have run properly
[Tue Jun 25 16:41:11 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Tue Jun 25 16:41:11 2013] fullrun_mos2_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Tue Jun 25 16:41:11 2013] Fit fullrun_mos2_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Tue Jun 25 16:42:03 2013] Spatial fit model total counts = 1498.110000, observed total counts = 1497.000000
[Tue Jun 25 16:42:03 2013] Offset between fit and detection position for source 68 = 0.644595 pixels
[Tue Jun 25 16:42:03 2013] Warning, changing simple spatial fit ID from 48 to 20
[Tue Jun 25 16:42:03 2013] 1405.750000 total counts/ 906.199000 bgd. counts: snr = 16.594648
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.644595 pixels
  Position = (182.2, 296.6) = 8 22 37.76 -42 59 0.9
  Extent = 20.9 (20.9-20.9)", rotation angle = 0
  Source counts = 499.6 +/- 37.5
  Background counts = 906.2
  Rate = 0.2 +/- 0.01
[Tue Jun 25 16:42:04 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 16:42:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 16:42:04 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 16:42:04 2013] Source does appear to be extended
[Tue Jun 25 16:42:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 16:43:41 2013] XMMSAS src. selection expression = ellipse(15801.716000, 25751.752000, 1253.208036, 1253.208036, 0.000000, X, Y)
[Tue Jun 25 16:43:41 2013] Not overwriting source region fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_src.reg
[Tue Jun 25 16:43:41 2013] Extracting stamp from image fullrun_mos2_xmm0650220901_pi300-10000_cl_sm2.00.img.gz, (110, 225) - (254, 369)
[Tue Jun 25 16:43:41 2013] XMMSAS bgd. selection expression = annulus(15801.716000, 25751.752000, 2088.680060, 4177.360120, X, Y) && !ellipse(20465.906000, 29178.418000, 1450.576042, 1450.576042, 0.000000, X, Y) && !ellipse(18358.402000, 23960.260000, 1501.408043, 1501.408043, 0.000000, X, Y) && !ellipse(19398.536000, 23199.422000, 1518.352044, 1518.352044, 0.000000, X, Y) && !ellipse(16103.620000, 25487.528000, 1644.144047, 1644.144047, 0.000000, X, Y) && !ellipse(8529.598000, 20980.716000, 3232.536093, 3232.536093, 0.000000, X, Y) && !ellipse(18925.339000, 27504.256000, 1499.984043, 1499.984043, 0.000000, X, Y) && !ellipse(15425.150000, 26382.838000, 1301.920037, 1301.920037, 0.000000, X, Y) && !ellipse(15657.128000, 25694.238000, 3288.288095, 3288.288095, 0.000000, X, Y) && !ellipse(19092.406000, 28108.314000, 1486.056043, 1486.056043, 0.000000, X, Y) && !ellipse(10368.062000, 23052.784000, 2101.304060, 2101.304060, 0.000000, X, Y) && !ellipse(19955.136000, 23093.106600, 1445.600042, 1445.600042, 0.000000, X, Y) && !ellipse(14124.060989, 28922.027405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20589.006020, 25278.539600, 1029.200030, 1029.200030, 0.000000, X, Y) && !ellipse(12782.721603, 27089.143860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13252.453369, 26569.931641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11284.280151, 29462.665710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21068.628000, 29880.366000, 1762.584051, 1762.584051, 265.218000, X, Y) && !ellipse(15158.508194, 26905.094574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20212.529037, 28662.455811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13691.763809, 26488.146118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16717.424576, 25106.442322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17152.746000, 24739.728000, 1644.144047, 1644.144047, 0.000000, X, Y) && !ellipse(12628.688751, 26228.189545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12138.286255, 29521.726837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13872.674850, 27007.143280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14735.397415, 25819.158386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13096.559341, 28824.027618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13493.470291, 28403.269196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12313.827104, 29853.300862, 1914.600055, 1369.618620, 116.750981, X, Y) && !ellipse(14577.140411, 29000.257843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11737.619766, 29203.739288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18420.094864, 24634.967529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20455.419083, 25510.407684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19048.763321, 25562.886993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14480.489380, 30479.000305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17538.841522, 24069.459564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12610.459320, 29114.004608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13933.578568, 27616.214966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14800.902298, 29815.959839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17882.306732, 23709.663269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16282.707336, 24702.925659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16889.210281, 24051.275269, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 16:43:41 2013] Writing fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68.gif
[Tue Jun 25 16:43:53 2013] ../../xmm0650220901/products/events/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0650220901/products/events/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create
[Tue Jun 25 16:43:53 2013] Mean detx,y = (-8910.04, -723.16) 
[Tue Jun 25 16:43:53 2013] ../../xmm0650220901/products/images/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_src.img and ../../xmm0650220901/products/images/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create
[Tue Jun 25 16:43:53 2013] ../../xmm0650220901/products/spectra/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_src.pi and ../../xmm0650220901/products/spectra/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create
[Tue Jun 25 16:43:53 2013] Setting source spectrum file to fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_src.pi.gz
[Tue Jun 25 16:43:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Tue Jun 25 16:43:53 2013] ../../xmm0650220901/products/lightcurves/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0650220901/products/lightcurves/fullrun_mos2_xmm0650220901_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create