[Tue Jun 25 16:37:07 2013] Detection parameters:
  Position = (211.5, 201.2) = 8 22 26.19 -43 5 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1247.9 +/- 112.2
  Background counts = 260.5
  Rate = 0.2 +/- 0.02

[Tue Jun 25 16:37:23 2013] Off-axis axis estimate = 9.46'
[Tue Jun 25 16:39:06 2013] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 16:39:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 16:39:06 2013] Initial guess for spatial extent in simple fitting = 11.16"
[Tue Jun 25 16:39:06 2013] source mask rpix=2.6, npix_max = 37, mask sum = 31, frac = 0.825
[Tue Jun 25 16:39:06 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.16"
[Tue Jun 25 16:39:06 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 25 16:39:06 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 25 16:39:06 2013] Fit fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jun 25 16:39:09 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 25 16:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 16:39:09 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 25 16:39:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 25 16:39:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:39:48 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 12.484882 pixels away
[Tue Jun 25 16:39:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 16:39:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 16:39:50 2013] Assessing source extent using major
[Tue Jun 25 16:39:50 2013] Source does appear to be extended
[Tue Jun 25 16:39:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 16:41:01 2013] Using EEF radius (= 11.16 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 16:41:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 16:41:01 2013] Initial guess for spatial extent in simple fitting = 11.16"
[Tue Jun 25 16:41:01 2013] source mask rpix=2.6, npix_max = 37, mask sum = 31, frac = 0.825
[Tue Jun 25 16:41:01 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.16"
[Tue Jun 25 16:41:02 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 25 16:41:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 16:41:02 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 25 16:41:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src3.csv
[Tue Jun 25 16:41:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:41:04 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 25 16:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 16:41:04 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 25 16:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun 25 16:41:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:41:41 2013] Warning, spatial fit 3 centroid is now closest to src. 72
[Tue Jun 25 16:41:42 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 16:41:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 16:41:42 2013] Assessing source extent using major
[Tue Jun 25 16:41:42 2013] Source does appear to be extended
[Tue Jun 25 16:41:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 16:43:06 2013] Counts = 1247.872437, rescaling region sizes by 2.000000
[Tue Jun 25 16:43:06 2013] XMMSAS src. selection expression = ellipse(18355.949356, 17454.098297, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 25 16:43:06 2013] Not overwriting source region fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_src.reg
[Tue Jun 25 16:43:06 2013] Extracting stamp from image fullrun_mos1_xmm0650220901_pi300-10000_cl_sm2.00.img.gz, (137, 126) - (287, 276)
[Tue Jun 25 16:43:06 2013] XMMSAS bgd. selection expression = annulus(18355.949356, 17454.098297, 4350.000000, 8700.000000, X, Y) && !ellipse(24663.391300, 24249.687200, 398.759211, 398.759211, 0.000000, X, Y) && !ellipse(20438.156082, 21266.161484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18547.222000, 23375.958000, 3016.336087, 3016.336087, 0.000000, X, Y) && !ellipse(16498.688000, 24642.032000, 527.353615, 527.353615, 0.000000, X, Y) && !ellipse(9005.826000, 21523.584000, 8025.504231, 8025.504231, 0.000000, X, Y) && !ellipse(10083.182000, 22211.592000, 1482.240043, 854.968025, 90.000000, X, Y) && !ellipse(27321.899658, 25542.881348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.426600, 23054.215400, 1235.672036, 375.768811, 0.000000, X, Y) && !ellipse(19686.223907, 22316.954376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10357.906000, 22707.904000, 2115.568061, 2115.568061, 0.000000, X, Y) && !ellipse(17106.322647, 24550.463257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25436.605835, 22492.053558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25160.350000, 23055.432000, 1259.024036, 1259.024036, 0.000000, X, Y) && !ellipse(15383.854000, 26111.492000, 1744.936050, 1744.936050, 0.000000, X, Y) && !ellipse(18483.644000, 23899.802000, 2903.616084, 2091.040060, 228.847000, X, Y) && !ellipse(20649.118600, 25214.760000, 1290.632037, 1290.632037, 0.000000, X, Y) && !ellipse(16129.533386, 25615.934479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23891.101000, 23095.664200, 1714.368049, 386.600811, 182.449000, X, Y) && !ellipse(19239.964000, 22717.394000, 1508.168043, 1508.168043, 0.000000, X, Y) && !ellipse(21087.680000, 20497.636000, 711.913620, 711.913620, 0.000000, X, Y) && !ellipse(17651.615219, 24397.437988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24795.520800, 27138.049800, 1061.720031, 1061.720031, 0.000000, X, Y) && !ellipse(18865.241000, 27112.738000, 1509.208043, 1509.208043, 0.000000, X, Y) && !ellipse(19615.976000, 20715.180000, 1564.584045, 1564.584045, 0.000000, X, Y) && !ellipse(19389.648000, 23237.594000, 1451.808042, 1451.808042, 0.000000, X, Y) && !ellipse(20060.810043, 22672.768127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11335.654000, 23745.674000, 1955.952056, 1955.952056, 0.000000, X, Y) && !ellipse(12732.175156, 27007.663666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10431.378000, 23086.068000, 2421.392070, 2421.392070, 0.000000, X, Y) && !ellipse(9037.711845, 20490.000839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15189.582657, 26563.572845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18440.768250, 22895.580841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19046.406000, 27240.180600, 3018.096087, 1408.992041, 294.539000, X, Y) && !ellipse(20784.926000, 20600.518000, 528.865615, 528.865615, 0.000000, X, Y) && !ellipse(24847.219200, 26610.663600, 1107.736032, 1107.736032, 0.000000, X, Y) && !ellipse(15003.289871, 15780.610764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20280.381800, 19341.204000, 1572.608045, 1572.608045, 0.000000, X, Y) && !ellipse(23540.030792, 22439.327332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19906.059006, 23868.208344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12731.340149, 26318.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16189.701660, 25226.603638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21793.744000, 22083.420000, 2614.656075, 2614.656075, 0.000000, X, Y) && !ellipse(10753.339340, 21708.265015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25646.958496, 16477.586487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13520.714000, 26613.874000, 1802.320052, 1802.320052, 0.000000, X, Y) && !ellipse(17627.883240, 25362.546448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25473.890411, 16046.623459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18737.017746, 26584.465271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22913.427948, 22600.628326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25778.770081, 25098.201111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14271.924000, 27428.892000, 1775.496051, 478.998414, 94.798320, X, Y) && !ellipse(19450.861800, 21359.074800, 1551.360045, 885.088025, 346.920000, X, Y) && !ellipse(23476.428000, 23321.860000, 1326.720038, 1326.720038, 0.000000, X, Y) && !ellipse(26756.738400, 21928.961600, 1302.080037, 1302.080037, 0.000000, X, Y) && !ellipse(20593.630000, 22390.140000, 1474.752042, 1474.752042, 0.000000, X, Y) && !ellipse(26162.060730, 22604.921509, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26599.429016, 17101.110825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.036530, 15872.774796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20331.956238, 24929.994385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9935.025459, 24762.504517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15544.161819, 15101.452942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13518.177994, 14660.570724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18739.003708, 25455.206970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20516.848495, 21633.280350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26609.244659, 24493.908478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14300.345642, 26230.018860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23670.086000, 28147.998000, 2415.152069, 2415.152069, 0.000000, X, Y) && !ellipse(25779.885193, 25613.656464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9425.880447, 24924.732117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24668.997040, 22486.531097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13612.816513, 15425.738220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24938.973694, 25973.585510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17314.621643, 17730.595703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23622.740265, 14640.226562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14915.656647, 16741.116730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.568176, 16938.597809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9364.686000, 21564.044000, 12693.408365, 12693.408365, 0.000000, X, Y) && !ellipse(12822.610764, 15004.334625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27155.219574, 24556.235291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19180.573578, 24655.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8908.774994, 22384.192993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9609.841454, 20231.035919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18742.483124, 24823.602051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21871.437805, 13188.214935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20466.694992, 25874.069702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13409.248779, 22045.375412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.860504, 16659.992310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10211.550079, 24208.386627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12736.364792, 22400.778961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21211.546204, 21171.702179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21939.828705, 19799.081238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.936523, 14393.902237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17035.579391, 23628.517609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12124.813309, 15541.498825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21266.043335, 13436.320786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24073.389008, 22417.598572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.820526, 14134.107620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19556.410233, 14302.105927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9089.538681, 25131.179230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9140.032000, 24194.636000, 2098.448060, 2098.448060, 0.000000, X, Y) && !ellipse(27174.723419, 18666.784256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21704.067413, 21723.535416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19402.938000, 28093.824000, 2929.264084, 2929.264084, 0.000000, X, Y) && !ellipse(24807.490000, 17172.208000, 1658.024048, 1658.024048, 0.000000, X, Y) && !ellipse(24133.557281, 26589.642578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11430.828476, 19268.306366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15574.613678, 24678.605591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14137.399857, 23184.888763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10699.637390, 24965.983307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11230.665817, 18762.867111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26466.876678, 16567.355682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18713.628265, 26233.616425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22758.565399, 13262.776123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15955.822784, 19695.474030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9642.651642, 19624.389603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15252.137802, 19876.540390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24050.754883, 18840.634247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.249542, 16478.987015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15083.192978, 16392.779541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16999.915710, 25863.038055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22286.734833, 22302.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23738.146423, 19338.887665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.380859, 18924.278290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13949.005615, 23692.623291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14285.050018, 20205.603394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25255.909851, 9786.692291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.494049, 26143.839264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.844391, 8820.831131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15644.598923, 17007.612640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13487.480545, 23385.563843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13105.007645, 13005.798492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.181793, 9430.404617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20996.206000, 22354.568000, 1437.080041, 1437.080041, 0.000000, X, Y) && !ellipse(17070.157166, 26729.671478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19391.729385, 13076.951950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10367.726204, 19422.254257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20477.977539, 24509.517395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14435.822495, 19815.460114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26268.808838, 23985.242035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12558.455261, 20226.225006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16213.186722, 15257.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11998.990143, 16278.256180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14271.014206, 17500.035614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18202.910812, 12038.004471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13371.916412, 20657.873032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.082825, 8045.960167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25521.545532, 10808.185608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10590.206375, 18919.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12469.059097, 21585.918610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.248291, 10031.271599, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 16:43:06 2013] Writing fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34.gif
[Tue Jun 25 16:43:35 2013] ../../xmm0650220901/products/events/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_src.evt and ../../xmm0650220901/products/events/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_bgd.evt exist, delete to re-create
[Tue Jun 25 16:43:35 2013] Mean detx,y = (7610.76, 5470.83) 
[Tue Jun 25 16:43:35 2013] ../../xmm0650220901/products/images/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_src.img and ../../xmm0650220901/products/images/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_bgd.img exist, delete to re-create
[Tue Jun 25 16:43:35 2013] ../../xmm0650220901/products/spectra/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_src.pi and ../../xmm0650220901/products/spectra/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_bgd.pi exist, delete to re-create
[Tue Jun 25 16:43:35 2013] Setting source spectrum file to fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_src.pi.gz
[Tue Jun 25 16:43:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Jun 25 16:43:35 2013] ../../xmm0650220901/products/lightcurves/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_src.lc and ../../xmm0650220901/products/lightcurves/fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src34_bgd.lc exist, delete to re-create