[Tue Jun 25 16:37:04 2013] Detection parameters:
  Position = (180.2, 412.9) = 8 22 38.45 -42 50 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1026.6 +/- 56.7
  Background counts = 610.5
  Rate = 0.07 +/- 0.004

[Tue Jun 25 16:37:23 2013] Off-axis axis estimate = 11.93'
[Tue Jun 25 16:39:06 2013] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 16:39:06 2013] Initial guess for spatial extent in simple fitting = 12.40"
[Tue Jun 25 16:39:06 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Tue Jun 25 16:39:06 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.40"
[Tue Jun 25 16:39:07 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jun 25 16:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src27.csv
[Tue Jun 25 16:39:07 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jun 25 16:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src27.csv
[Tue Jun 25 16:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:39:09 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jun 25 16:39:09 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jun 25 16:39:09 2013] Fit fullrun_mos1_xmm0650220901_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Jun 25 16:39:49 2013] Warning, spatial fit 27 centroid is now closest to src. 79
[Tue Jun 25 16:39:49 2013] Source 11 is offset by 0.138005 and 4.252401 pixels which is larger than
2 X fitted extent = 1.581117 x 1.581117, not incorporating fit results
[Tue Jun 25 16:39:50 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 16:39:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 16:39:50 2013] Assessing source extent using major
[Tue Jun 25 16:39:50 2013] Source does appear to be extended
[Tue Jun 25 16:39:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 16:39:50 2013] Source is confused with source 2
[Tue Jun 25 16:41:01 2013] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 16:41:01 2013] Initial guess for spatial extent in simple fitting = 12.40"
[Tue Jun 25 16:41:01 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Tue Jun 25 16:41:01 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 12.40"
[Tue Jun 25 16:41:02 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src24.ximg exists
[Tue Jun 25 16:41:02 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Jun 25 16:41:02 2013] Fit fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_src24 appears to have run properly
[Tue Jun 25 16:41:04 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Jun 25 16:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue Jun 25 16:41:04 2013] fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Jun 25 16:41:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue Jun 25 16:41:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650220901_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 16:41:41 2013] Warning, spatial fit 24 centroid is now closest to src. 79
[Tue Jun 25 16:41:42 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 16:41:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 16:41:42 2013] Assessing source extent using major
[Tue Jun 25 16:41:42 2013] Source does appear to be extended
[Tue Jun 25 16:41:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 16:43:11 2013] Counts = 1026.615356, rescaling region sizes by 2.000000
[Tue Jun 25 16:43:11 2013] XMMSAS src. selection expression = ellipse(15626.758453, 35875.612854, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 25 16:43:11 2013] Not overwriting source region fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun 25 16:43:11 2013] Extracting stamp from image fullrun_mos1_xmm0650220901_pi300-10000_cl_sm2.00.img.gz, (105, 338) - (255, 488)
[Tue Jun 25 16:43:11 2013] XMMSAS bgd. selection expression = annulus(15626.758453, 35875.612854, 4350.000000, 8700.000000, X, Y) && !ellipse(14655.255978, 36276.168000, 2069.672060, 2069.672060, 0.000000, X, Y) && !ellipse(9005.826000, 21523.584000, 8025.504231, 8025.504231, 0.000000, X, Y) && !ellipse(14715.740578, 36654.198558, 1508.168043, 816.045329, 74.075645, X, Y) && !ellipse(15383.854000, 26111.492000, 1744.936050, 1744.936050, 0.000000, X, Y) && !ellipse(17647.125565, 37843.191345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21284.717484, 30316.477997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20563.546000, 29311.586000, 1734.288050, 1734.288050, 0.000000, X, Y) && !ellipse(10207.608025, 33275.603729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14788.277634, 34507.922302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24795.520800, 27138.049800, 1061.720031, 1061.720031, 0.000000, X, Y) && !ellipse(18865.241000, 27112.738000, 1509.208043, 1509.208043, 0.000000, X, Y) && !ellipse(20213.092000, 28771.408000, 1464.632042, 1464.632042, 0.000000, X, Y) && !ellipse(12732.175156, 27007.663666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18564.434204, 37638.114227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15189.582657, 26563.572845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19046.406000, 27240.180600, 3018.096087, 1408.992041, 294.539000, X, Y) && !ellipse(10540.626358, 33772.455292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21780.935822, 30367.220917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.219200, 26610.663600, 1107.736032, 1107.736032, 0.000000, X, Y) && !ellipse(21599.592000, 31128.736000, 1454.472042, 1454.472042, 0.000000, X, Y) && !ellipse(22127.091904, 30775.644073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12731.340149, 26318.179108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18474.842896, 37022.715607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21703.088000, 30104.720000, 1662.240048, 1662.240048, 0.000000, X, Y) && !ellipse(24496.726000, 27361.710000, 1207.576035, 1207.576035, 0.000000, X, Y) && !ellipse(11894.997955, 29364.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13520.714000, 26613.874000, 1802.320052, 1802.320052, 0.000000, X, Y) && !ellipse(18737.017746, 26584.465271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14271.924000, 27428.892000, 1775.496051, 478.998414, 94.798320, X, Y) && !ellipse(10880.523872, 34208.283661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21159.332000, 29869.478000, 713.466421, 713.466421, 0.000000, X, Y) && !ellipse(17005.477997, 32585.038574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14783.956573, 27186.660431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25100.116340, 28977.645200, 1116.552032, 363.082410, 257.044032, X, Y) && !ellipse(13256.819565, 28658.996307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13961.566559, 28765.598389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12885.058380, 29004.020020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15394.000000, 36911.361023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13853.040909, 27527.202454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23670.086000, 28147.998000, 2415.152069, 2415.152069, 0.000000, X, Y) && !ellipse(14860.672318, 32185.892090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14261.810547, 29528.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17365.782730, 32411.444794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9364.686000, 21564.044000, 12693.408365, 12693.408365, 0.000000, X, Y) && !ellipse(11364.124847, 27074.249146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17867.621765, 36416.062653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14367.450180, 30234.485382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13581.897369, 36409.916260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.903046, 27969.028534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17436.756973, 32821.511414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12411.491425, 29963.866211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9945.489594, 30492.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13580.467636, 30048.556335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22698.978577, 29457.931793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15345.677139, 27788.138733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14951.714600, 29367.490875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14452.435013, 28768.128632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19402.938000, 28093.824000, 2929.264084, 2929.264084, 0.000000, X, Y) && !ellipse(15864.054352, 32316.763794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15688.313980, 37897.653961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15387.759354, 38023.839539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24133.557281, 26589.642578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16337.232346, 27084.954224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18510.243729, 36060.161285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10649.254890, 31891.271454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23671.940613, 28487.858429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15327.480896, 28662.009766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12793.279327, 30047.712036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10553.945976, 30107.487366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18022.387405, 29444.162811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15173.620621, 31779.385864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23261.159790, 28309.838715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8015.348343, 26472.951385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14046.563339, 28223.895416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13521.999908, 30640.558838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18239.953781, 29020.077637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14111.716431, 30718.959198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13603.948715, 31175.257843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23184.915314, 29005.328949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12835.150467, 36532.743225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16048.087708, 31430.530945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14460.110703, 28032.013794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14754.383530, 33808.563690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15008.387527, 30128.281555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16516.340622, 36073.348816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17994.400742, 32141.906219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17070.157166, 26729.671478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14841.676910, 28112.378876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15036.306488, 28606.262115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16063.619629, 27515.214996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18445.472961, 34732.768768, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 16:43:11 2013] Writing fullrun_mos1_xmm0650220901_pi300-10000_pass1_cl_src11.gif