[Mon Jun 11 14:53:17 2012] Detection parameters:
  Position = (317.6, 297.9) = 5 18 11.26 -68 26 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.1 +/- 12.5
  Background counts = 22.1
  Rate = 0.003 +/- 0.0005

[Mon Jun 11 14:53:17 2012] Off-axis axis estimate = 1.39'
[Mon Jun 11 15:11:54 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 15:11:54 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Jun 11 15:11:54 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.094
[Mon Jun 11 15:11:54 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.12"
[Mon Jun 11 15:22:39 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jun 11 15:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_src6.csv
[Mon Jun 11 15:22:39 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jun 11 15:22:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_src6.csv
[Mon Jun 11 15:22:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 15:22:39 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jun 11 15:22:39 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jun 11 15:22:39 2012] Fit fullrun_mos1_xmm0650020101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Jun 11 15:33:37 2012] Source 8 is offset by -5.971690 and 6.441478 pixels which is larger than
2 X fitted extent = 0.818703 x 0.818703, not incorporating fit results
[Mon Jun 11 15:33:37 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 15:33:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 15:33:37 2012] Assessing source extent using major
[Mon Jun 11 15:33:37 2012] Source does appear to be extended
[Mon Jun 11 15:33:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 15:52:15 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 15:52:15 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Mon Jun 11 15:52:15 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.094
[Mon Jun 11 15:52:15 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.12"
[Mon Jun 11 16:02:10 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jun 11 16:02:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_src6.csv
[Mon Jun 11 16:02:10 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jun 11 16:02:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_src6.csv
[Mon Jun 11 16:02:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 16:02:10 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jun 11 16:02:10 2012] fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jun 11 16:02:10 2012] Fit fullrun_mos1_xmm0650020101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Jun 11 16:12:46 2012] Spatial fit model total counts = 279.000000, observed total counts = 279.000000
[Mon Jun 11 16:12:46 2012] Offset between fit and detection position for source 8 = 0.140723 pixels
[Mon Jun 11 16:12:46 2012] 274.882800 total counts/ 224.710000 bgd. counts: snr = 3.347011
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.140723 pixels
  Position = (317.4, 297.8) = 5 18 11.37 -68 26 5.3
  Extent = 5.0 (3.5-6.6)", rotation angle = 0
  Source counts = 50.2 +/- 16.6
  Background counts = 224.7
  Rate = 0.002 +/- 0.0007
[Mon Jun 11 16:12:46 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 16:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 16:12:46 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 16:12:46 2012] Source does appear to be extended
[Mon Jun 11 16:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 16:29:13 2012] XMMSAS src. selection expression = ellipse(27569.161800, 25864.232660, 297.104409, 297.104409, 0.000000, X, Y)
[Mon Jun 11 16:29:13 2012] Writing source region out to fullrun_mos1_xmm0650020101_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun 11 16:29:13 2012] Extracting stamp from image fullrun_mos1_xmm0650020101_pi300-10000_cl_sm2.00.img.gz, (300, 281) - (335, 315)
[Mon Jun 11 16:29:13 2012] XMMSAS bgd. selection expression = annulus(27569.161800, 25864.232660, 495.174014, 990.348028, X, Y)
[Mon Jun 11 16:29:13 2012] Writing fullrun_mos1_xmm0650020101_pi300-10000_pass1_cl_src8.gif
[Mon Jun 11 16:30:03 2012] Mean detx,y = (251.49, -1321.00) 
[Mon Jun 11 16:30:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 16:30:08 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 16:30:08 2012] Setting source spectrum file to fullrun_mos1_xmm0650020101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 11 16:30:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0650020101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jun 11 16:37:14 2012] Not generating rmf since there are only 50 counts
[Mon Jun 11 16:37:14 2012] rmf not generated due to insufficient counts
[Mon Jun 11 16:40:57 2012] Updating aperture counts using extracted products
[Mon Jun 11 16:40:57 2012] Error reading totcts from fullrun_mos1_xmm0650020101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 11 16:40:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 16:40:57 2012] Using photon index=1.80, rate=0.00212, arf fullrun_mos1_xmm0650020101_pi300-10000_pass1_cl_src8.arf
[Mon Jun 11 16:40:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 16:40:57 2012] Updating source flux to 2.7e-14
[Mon Jun 11 16:40:58 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Mon Jun 11 16:40:58 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting