[Thu May 30 08:43:16 2013] Detection parameters:
  Position = (247.0, 364.9) = 5 34 43.69 22 6 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 426.7 +/- 38.0
  Background counts = 695.4
  Rate = 0.02 +/- 0.002

[Thu May 30 08:43:23 2013] Off-axis axis estimate = 6.09'
[Thu May 30 17:42:02 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Thu May 30 17:42:02 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Thu May 30 17:42:02 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.046
[Thu May 30 17:42:02 2013] Giving source the simple spatial ID 104 for pass 0, mean size = 9.48"
[Fri May 31 03:34:23 2013] Vigneting correction estimate = 1.000000
[Fri May 31 03:34:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 03:34:23 2013] Assessing source extent using major
[Fri May 31 03:34:23 2013] Source does appear to be extended
[Fri May 31 03:34:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 03:34:23 2013] Source is confused with source 45
[Fri May 31 16:03:33 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Fri May 31 16:03:33 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Fri May 31 16:03:33 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.046
[Fri May 31 16:03:33 2013] Giving source the simple spatial ID 98 for pass 1, mean size = 9.48"
[Sat Jun  1 02:58:07 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src98.ximg exists
[Sat Jun  1 02:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src98.csv
[Sat Jun  1 02:58:07 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src98_1.ximg exists
[Sat Jun  1 02:58:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src98.csv
[Sat Jun  1 02:58:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:58:12 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src98.ximg exists
[Sat Jun  1 02:58:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src98.csv
[Sat Jun  1 02:58:12 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src98_1.ximg exists
[Sat Jun  1 02:58:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src98.csv
[Sat Jun  1 02:58:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:59:27 2013] Warning, spatial fit 98 centroid is now closest to src. 18
[Sat Jun  1 02:59:29 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 02:59:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 02:59:29 2013] Assessing source extent using major
[Sat Jun  1 02:59:29 2013] Source does appear to be extended
[Sat Jun  1 02:59:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 09:06:23 2013] XMMSAS src. selection expression = ellipse(21436.326294, 31696.522400, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 09:06:23 2013] Writing source region out to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53_src.reg
[Sat Jun  1 09:06:23 2013] Extracting stamp from image fullrun_mos2_xmm0611181701_pi300-10000_cl_sm2.00.img.gz, (209, 327) - (284, 402)
[Sat Jun  1 09:06:23 2013] XMMSAS bgd. selection expression = annulus(21436.326294, 31696.522400, 1087.500000, 2175.000000, X, Y) && !ellipse(23892.785950, 31528.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24411.730000, 32469.030000, 1507.456043, 583.521617, 357.260760, X, Y) && !ellipse(23198.840942, 31650.322235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23801.166000, 32487.888000, 1507.456043, 760.391222, 10.628700, X, Y) && !ellipse(23063.888000, 32626.257000, 2080.688060, 529.239215, 1.427040, X, Y) && !ellipse(23299.541800, 32555.778600, 1508.888043, 571.801616, 3.228810, X, Y) && !ellipse(21075.841019, 32059.693237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.309143, 32883.785126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21460.826904, 32078.490845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20371.832123, 31702.753754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22096.987854, 31619.723022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.536987, 32811.963928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20048.853119, 32194.725372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24380.955566, 33499.470490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19777.657806, 31811.737396, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 09:06:23 2013] Writing fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53.gif
[Sat Jun  1 11:13:11 2013] Mean detx,y = (-3604.36, -7230.85) 
[Sat Jun  1 11:13:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 11:13:32 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 11:13:32 2013] Setting source spectrum file to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Jun  1 11:13:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sat Jun  1 14:46:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 14:46:45 2013] rmf not generated due to insufficient counts
[Sat Jun  1 15:25:02 2013] Updating aperture counts using extracted products
[Sat Jun  1 15:25:02 2013] Total counts from fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 5013.00
[Sat Jun  1 15:25:02 2013] Total counts from fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53_bgd.pi.gz = 3115.00
[Sat Jun  1 15:25:02 2013] Got source and background scale factors 1006046.000000, 1084401.000000
[Sat Jun  1 15:25:02 2013] User source parameters:
  Position = (247.0, 364.9) = 5 34 43.69 22 6 49.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2123.1 +/- 71.8
  Background aperture counts = 2889.9
  Rate = 0.1 +/- 0.003

[Sat Jun  1 15:25:02 2013] Updating counts from extracted products
[Sat Jun  1 15:25:02 2013] Set source signif. to 2123.08/53.76 = 39.49
[Sat Jun  1 15:25:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 15:25:26 2013] Using photon index=1.80, rate=0.0996, arf fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53.arf
[Sat Jun  1 15:25:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 15:25:26 2013] Updating source flux to 1.9e-12
[Sat Jun  1 15:26:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 15:27:39 2013] xmm0611181701/analysis//spectral/fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete