[Thu May 30 08:43:19 2013] Detection parameters:
  Position = (202.5, 248.0) = 5 34 57.59 21 58 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.1 +/- 31.8
  Background counts = 495.8
  Rate = 0.02 +/- 0.003

[Thu May 30 08:43:23 2013] Off-axis axis estimate = 7.86'
[Thu May 30 17:42:02 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu May 30 17:42:02 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Thu May 30 17:42:02 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.813
[Thu May 30 17:42:02 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 10.36"
[Fri May 31 03:33:03 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src88.ximg exists
[Fri May 31 03:33:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src88.csv
[Fri May 31 03:33:03 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src88_1.ximg exists
[Fri May 31 03:33:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src88.csv
[Fri May 31 03:33:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 03:33:06 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Fri May 31 03:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src88.csv
[Fri May 31 03:33:06 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Fri May 31 03:33:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src88.csv
[Fri May 31 03:33:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 03:34:22 2013] Spatial fit model total counts = 6342.060000, observed total counts = 5391.000000
[Fri May 31 03:34:22 2013] Poor agreement between spatial fit and data for source 115
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 03:34:22 2013] Warning, spatial fit 88 centroid is now closest to src. 112
[Fri May 31 03:34:23 2013] Vigneting correction estimate = 1.000000
[Fri May 31 03:34:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 03:34:23 2013] Assessing source extent using major
[Fri May 31 03:34:23 2013] Source does appear to be extended
[Fri May 31 03:34:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 03:34:23 2013] Source is confused with source 112
[Fri May 31 16:03:33 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri May 31 16:03:33 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Fri May 31 16:03:33 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.813
[Fri May 31 16:03:33 2013] Giving source the simple spatial ID 83 for pass 1, mean size = 10.36"
[Sat Jun  1 02:58:06 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src83.ximg exists
[Sat Jun  1 02:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src83.csv
[Sat Jun  1 02:58:06 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src83_1.ximg exists
[Sat Jun  1 02:58:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src83.csv
[Sat Jun  1 02:58:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:58:11 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Sat Jun  1 02:58:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src83.csv
[Sat Jun  1 02:58:11 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Sat Jun  1 02:58:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src83.csv
[Sat Jun  1 02:58:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:59:26 2013] Spatial fit model total counts = 6314.790000, observed total counts = 5391.000000
[Sat Jun  1 02:59:26 2013] Poor agreement between spatial fit and data for source 115
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 02:59:26 2013] Warning, spatial fit 83 centroid is now closest to src. 112
[Sat Jun  1 02:59:29 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 02:59:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 02:59:29 2013] Assessing source extent using major
[Sat Jun  1 02:59:29 2013] Source does appear to be extended
[Sat Jun  1 02:59:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 09:06:21 2013] XMMSAS src. selection expression = ellipse(17566.963593, 21531.185181, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 09:06:21 2013] Writing source region out to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115_src.reg
[Sat Jun  1 09:06:21 2013] Extracting stamp from image fullrun_mos2_xmm0611181701_pi300-10000_cl_sm2.00.img.gz, (165, 211) - (240, 286)
[Sat Jun  1 09:06:21 2013] XMMSAS bgd. selection expression = annulus(17566.963593, 21531.185181, 1087.500000, 2175.000000, X, Y) && !ellipse(16704.595474, 23840.370361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17316.855850, 19800.686203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17499.734268, 21885.123154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17907.518890, 22585.789368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17631.567093, 20381.980972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21425.092000, 17587.294000, 2177.352063, 450.100013, 3.623740, X, Y) && !ellipse(17871.909637, 23730.260986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17282.694916, 21002.398926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17875.778015, 23097.317932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17111.453491, 18667.355087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17149.480148, 22349.765228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17085.172684, 23008.103638, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 09:06:21 2013] Writing fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115.gif
[Sat Jun  1 10:59:49 2013] Mean detx,y = (-7041.32, 3222.47) 
[Sat Jun  1 10:59:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 11:00:10 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 11:00:11 2013] Setting source spectrum file to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Sat Jun  1 11:00:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115_bgd.pi.gz
[Sat Jun  1 14:25:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 14:25:40 2013] rmf not generated due to insufficient counts
[Sat Jun  1 15:24:57 2013] Updating aperture counts using extracted products
[Sat Jun  1 15:24:57 2013] Total counts from fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115_src_b10.pi.gz = 3298.00
[Sat Jun  1 15:24:57 2013] Total counts from fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115_bgd.pi.gz = 6233.00
[Sat Jun  1 15:24:57 2013] Got source and background scale factors 912748.000000, 2493187.000000
[Sat Jun  1 15:24:57 2013] User source parameters:
  Position = (202.5, 248.0) = 5 34 57.59 21 58 23.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1016.1 +/- 58.4
  Background aperture counts = 2281.9
  Rate = 0.05 +/- 0.003

[Sat Jun  1 15:24:57 2013] Updating counts from extracted products
[Sat Jun  1 15:24:57 2013] Set source signif. to 1016.12/47.77 = 21.27
[Sat Jun  1 15:25:25 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 15:25:25 2013] Using photon index=1.80, rate=0.0477, arf fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115.arf
[Sat Jun  1 15:25:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 15:25:25 2013] Updating source flux to 1e-12
[Sat Jun  1 15:26:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 15:27:39 2013] xmm0611181701/analysis//spectral/fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src115_pl.csv not found, spectral fit skipped or did not complete