[Thu May 30 08:43:19 2013] Detection parameters:
  Position = (363.5, 273.9) = 5 34 7.23 22 0 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 614.9 +/- 43.4
  Background counts = 639.8
  Rate = 0.05 +/- 0.003

[Thu May 30 08:43:23 2013] Off-axis axis estimate = 5.04'
[Thu May 30 17:42:02 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Thu May 30 17:42:02 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Thu May 30 17:42:02 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.573
[Thu May 30 17:42:02 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.95"
[Fri May 31 03:33:01 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src33.ximg exists
[Fri May 31 03:33:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src33.csv
[Fri May 31 03:33:01 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri May 31 03:33:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src33.csv
[Fri May 31 03:33:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 03:33:04 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri May 31 03:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri May 31 03:33:04 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri May 31 03:33:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri May 31 03:33:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 03:34:21 2013] Warning, spatial fit 33 centroid is now closest to src. 99
[Fri May 31 03:34:22 2013] Vigneting correction estimate = 1.000000
[Fri May 31 03:34:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 03:34:22 2013] Assessing source extent using major
[Fri May 31 03:34:22 2013] Source does appear to be extended
[Fri May 31 03:34:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 03:34:23 2013] Source is confused with source 104
[Fri May 31 16:03:33 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri May 31 16:03:33 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Fri May 31 16:03:33 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.573
[Fri May 31 16:03:33 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 8.95"
[Sat Jun  1 02:58:04 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src29.ximg exists
[Sat Jun  1 02:58:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src29.csv
[Sat Jun  1 02:58:04 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat Jun  1 02:58:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src29.csv
[Sat Jun  1 02:58:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:58:09 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat Jun  1 02:58:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Jun  1 02:58:09 2013] fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat Jun  1 02:58:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat Jun  1 02:58:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:59:25 2013] Warning, spatial fit 29 centroid is now closest to src. 99
[Sat Jun  1 02:59:28 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 02:59:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 02:59:28 2013] Assessing source extent using major
[Sat Jun  1 02:59:28 2013] Source does appear to be extended
[Sat Jun  1 02:59:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 09:06:15 2013] XMMSAS src. selection expression = ellipse(31576.164612, 23783.289886, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 09:06:15 2013] Writing source region out to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101_src.reg
[Sat Jun  1 09:06:15 2013] Extracting stamp from image fullrun_mos2_xmm0611181701_pi300-10000_cl_sm2.00.img.gz, (326, 236) - (401, 311)
[Sat Jun  1 09:06:15 2013] XMMSAS bgd. selection expression = annulus(31576.164612, 23783.289886, 1087.500000, 2175.000000, X, Y) && !ellipse(31549.066000, 23180.988000, 1498.488043, 442.496813, 5.463400, X, Y) && !ellipse(31954.814000, 25190.590000, 1472.416042, 622.918418, 1.961300, X, Y) && !ellipse(31694.464752, 24318.076508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31801.924408, 25867.145386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31938.192000, 22233.948600, 1532.488044, 1532.488044, 0.000000, X, Y) && !ellipse(32250.024800, 20381.598000, 1863.080054, 516.479215, 2.290750, X, Y) && !ellipse(32788.522675, 25621.956085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31902.470367, 26297.998230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32111.083984, 22554.043182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.574066, 23788.679596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32452.033600, 20970.344000, 1595.744046, 267.336008, 5.751920, X, Y) && !ellipse(32356.950317, 21960.531296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32484.309418, 24831.137024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31347.165680, 21533.029099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32680.043488, 24413.962891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33039.656000, 27051.324000, 1499.656043, 1135.240033, 0.000000, X, Y) && !ellipse(31322.983673, 20957.672302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32735.366000, 22318.711460, 1563.448045, 630.428818, 19.132100, X, Y) && !ellipse(32608.078918, 23181.222168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33422.862274, 21199.849472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33080.610413, 21534.681854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33120.592499, 23694.991577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33142.985016, 24222.038788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.468000, 26205.004000, 1487.192043, 1487.192043, 0.000000, X, Y) && !ellipse(33288.708000, 25079.822000, 1487.192043, 379.488811, 13.635400, X, Y)
[Sat Jun  1 09:06:15 2013] Writing fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101.gif
[Sat Jun  1 10:05:32 2013] Mean detx,y = (7124.55, 181.76) 
[Sat Jun  1 10:05:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 10:05:54 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 10:05:55 2013] Setting source spectrum file to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Sat Jun  1 10:05:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Sat Jun  1 12:41:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 12:41:31 2013] rmf not generated due to insufficient counts
[Sat Jun  1 15:24:44 2013] Updating aperture counts using extracted products
[Sat Jun  1 15:24:44 2013] Total counts from fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101_src_b10.pi.gz = 5623.00
[Sat Jun  1 15:24:44 2013] Total counts from fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101_bgd.pi.gz = 0.00
[Sat Jun  1 15:24:44 2013] Got source and background scale factors 899476.000000, 1882.000000
[Sat Jun  1 15:24:44 2013] User source parameters:
  Position = (363.5, 273.9) = 5 34 7.23 22 0 30.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5623.0 +/- 76.0
  Background aperture counts = 0.0
  Rate = 0.3 +/- 0.004

[Sat Jun  1 15:24:44 2013] Updating counts from extracted products
[Sat Jun  1 15:25:22 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 15:25:22 2013] Using photon index=1.80, rate=0.264, arf fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101.arf
[Sat Jun  1 15:25:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 15:25:22 2013] Updating source flux to 6.9e-12
[Sat Jun  1 15:26:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 15:27:39 2013] xmm0611181701/analysis//spectral/fullrun_mos2_xmm0611181701_pi300-10000_pass1_cl_src101_pl.csv not found, spectral fit skipped or did not complete