[Thu May 30 08:41:45 2013] Detection parameters:
  Position = (364.6, 280.6) = 5 34 6.89 22 0 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 425.4 +/- 33.9
  Background counts = 478.3
  Rate = 0.03 +/- 0.003

[Thu May 30 08:41:48 2013] Off-axis axis estimate = 4.97'
[Thu May 30 08:49:43 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Thu May 30 08:49:43 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Thu May 30 08:49:43 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.770
[Thu May 30 08:49:43 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 8.91"
[Thu May 30 17:41:54 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src41.ximg exists
[Thu May 30 17:41:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src41.csv
[Thu May 30 17:41:54 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu May 30 17:41:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src41.csv
[Thu May 30 17:41:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 17:41:59 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu May 30 17:41:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu May 30 17:41:59 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu May 30 17:41:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu May 30 17:41:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 03:33:43 2013] Source 49 is offset by 5.897524 and 0.398435 pixels which is larger than
2 X fitted extent = 1.353623 x 1.353623, not incorporating fit results
[Fri May 31 03:33:43 2013] Vigneting correction estimate = 1.000000
[Fri May 31 03:33:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 03:33:43 2013] Assessing source extent using major
[Fri May 31 03:33:43 2013] Source does appear to be extended
[Fri May 31 03:33:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 03:33:43 2013] Source is confused with source 7
[Fri May 31 03:35:00 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:35:00 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Fri May 31 03:35:00 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.770
[Fri May 31 03:35:00 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 8.91"
[Fri May 31 16:03:27 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src39.ximg exists
[Fri May 31 16:03:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src39.csv
[Fri May 31 16:03:27 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri May 31 16:03:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src39.csv
[Fri May 31 16:03:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 16:03:31 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri May 31 16:03:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri May 31 16:03:31 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri May 31 16:03:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri May 31 16:03:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:58:53 2013] Warning, spatial fit 39 centroid is now closest to src. 7
[Sat Jun  1 02:58:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 02:58:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 02:58:53 2013] Assessing source extent using major
[Sat Jun  1 02:58:53 2013] Source does appear to be extended
[Sat Jun  1 02:58:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 03:00:16 2013] XMMSAS src. selection expression = ellipse(31668.336609, 24361.024261, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 03:00:16 2013] Writing source region out to fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49_src.reg
[Sat Jun  1 03:00:16 2013] Extracting stamp from image fullrun_mos1_xmm0611181701_pi300-10000_cl_sm2.00.img.gz, (327, 243) - (402, 318)
[Sat Jun  1 03:00:16 2013] XMMSAS bgd. selection expression = annulus(31668.336609, 24361.024261, 1087.500000, 2175.000000, X, Y) && !ellipse(31490.510712, 24994.508942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31433.544403, 23772.181244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31402.987671, 22211.090393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31524.463226, 26142.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32284.094600, 27592.530000, 1482.176043, 1482.176043, 0.000000, X, Y) && !ellipse(31607.318726, 26997.927673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32979.621063, 26857.821777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32290.524139, 25878.394745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32282.932000, 24837.141580, 1496.600043, 1219.096035, 92.322130, X, Y) && !ellipse(32983.084000, 23337.819800, 2669.784077, 1319.208038, 5.868800, X, Y) && !ellipse(31866.858459, 23359.472870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32481.182000, 23378.063600, 1521.200044, 1148.584033, 137.855600, X, Y) && !ellipse(32486.858246, 22563.152588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32253.361694, 21870.350571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31563.476000, 20640.666000, 3231.008093, 3231.008093, 0.000000, X, Y)
[Sat Jun  1 03:00:16 2013] Writing fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49.gif
[Sat Jun  1 04:41:43 2013] Mean detx,y = (-206.59, -7299.05) 
[Sat Jun  1 04:41:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 04:42:11 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 04:42:11 2013] Setting source spectrum file to fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sat Jun  1 04:42:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sat Jun  1 07:36:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 07:36:27 2013] rmf not generated due to insufficient counts
[Sat Jun  1 15:24:20 2013] Updating aperture counts using extracted products
[Sat Jun  1 15:24:20 2013] Total counts from fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 4222.00
[Sat Jun  1 15:24:20 2013] Total counts from fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49_bgd.pi.gz = 611.00
[Sat Jun  1 15:24:20 2013] Got source and background scale factors 948248.000000, 242302.000000
[Sat Jun  1 15:24:20 2013] User source parameters:
  Position = (364.6, 280.6) = 5 34 6.89 22 0 51.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1830.9 +/- 66.0
  Background aperture counts = 2391.1
  Rate = 0.09 +/- 0.003

[Sat Jun  1 15:24:20 2013] Updating counts from extracted products
[Sat Jun  1 15:24:20 2013] Set source signif. to 1830.85/48.90 = 37.44
[Sat Jun  1 15:24:35 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 15:24:35 2013] Using photon index=1.80, rate=0.0861, arf fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49.arf
[Sat Jun  1 15:24:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 15:24:35 2013] Updating source flux to 2.3e-12
[Sat Jun  1 15:25:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 15:26:46 2013] xmm0611181701/analysis//spectral/fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete