[Thu May 30 08:41:42 2013] Detection parameters:
  Position = (266.4, 201.0) = 5 34 37.58 21 55 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3809.1 +/- 529.4
  Background counts = 622.1
  Rate = 0.3 +/- 0.04

[Thu May 30 08:41:48 2013] Off-axis axis estimate = 7.43'
[Thu May 30 08:49:43 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Thu May 30 08:49:43 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Thu May 30 08:49:43 2013] source mask rpix=2.3, npix_max = 32, mask sum = 21, frac = 0.654
[Thu May 30 08:49:43 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.15"
[Thu May 30 17:41:53 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 30 17:41:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src2.csv
[Thu May 30 17:41:53 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 30 17:41:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src2.csv
[Thu May 30 17:41:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 17:41:57 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 30 17:41:57 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 30 17:41:57 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 30 17:41:57 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 30 17:41:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 03:33:42 2013] Warning, spatial fit 2 centroid is now closest to src. 11
[Fri May 31 03:33:43 2013] Source 2 is offset by -2.388326 and -3.501664 pixels which is larger than
2 X fitted extent = 1.191628 x 1.191628, not incorporating fit results
[Fri May 31 03:33:43 2013] Vigneting correction estimate = 1.000000
[Fri May 31 03:33:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 03:33:43 2013] Assessing source extent using major
[Fri May 31 03:33:43 2013] Source does appear to be extended
[Fri May 31 03:33:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 03:33:43 2013] Source is confused with source 86
[Fri May 31 03:35:00 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Fri May 31 03:35:00 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Fri May 31 03:35:00 2013] source mask rpix=2.3, npix_max = 32, mask sum = 21, frac = 0.654
[Fri May 31 03:35:00 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.15"
[Fri May 31 16:03:26 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 31 16:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src2.csv
[Fri May 31 16:03:26 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 31 16:03:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src2.csv
[Fri May 31 16:03:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 16:03:30 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 31 16:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 31 16:03:30 2013] fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 31 16:03:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri May 31 16:03:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:58:53 2013] Source 2 is offset by 4.536418 and 0.230189 pixels which is larger than
2 X fitted extent = 1.900349 x 9.329196, not incorporating fit results
[Sat Jun  1 02:58:53 2013] Source 2 is offset by 4.330487 and 0.402957 pixels which is larger than
2 X fitted extent = 2.338432 x 6.957196, not incorporating fit results
[Sat Jun  1 02:58:53 2013] Source 2 is offset by 4.434993 and 4.384088 pixels which is larger than
2 X fitted extent = 1.564910 x 9.612920, not incorporating fit results
[Sat Jun  1 02:58:53 2013] Source 2 is offset by 4.894143 and 3.831538 pixels which is larger than
2 X fitted extent = 2.158437 x 9.533012, not incorporating fit results
[Sat Jun  1 02:58:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 02:58:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 02:58:53 2013] Assessing source extent using major
[Sat Jun  1 02:58:53 2013] Source does appear to be extended
[Sat Jun  1 02:58:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 03:00:11 2013] Counts = 3809.055664, rescaling region sizes by 2.000000
[Sat Jun  1 03:00:11 2013] XMMSAS src. selection expression = ellipse(23131.432404, 17440.503220, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun  1 03:00:11 2013] Writing source region out to fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun  1 03:00:11 2013] Extracting stamp from image fullrun_mos1_xmm0611181701_pi300-10000_cl_sm2.00.img.gz, (191, 126) - (341, 276)
[Sat Jun  1 03:00:11 2013] XMMSAS bgd. selection expression = annulus(23131.432404, 17440.503220, 4350.000000, 8700.000000, X, Y) && !ellipse(28914.980957, 17371.658310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16957.947662, 26098.337372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(17907.196304, 25961.863556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16880.564178, 25094.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31490.510712, 24994.508942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31433.544403, 23772.181244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31402.987671, 22211.090393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16376.206000, 22514.578200, 1663.224048, 364.964011, 88.568640, X, Y) && !ellipse(31145.149811, 19355.759048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.486359, 17328.741089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.682068, 17565.444916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24359.400000, 10934.832000, 3344.584096, 1746.584050, 91.990890, X, Y) && !ellipse(24135.013600, 10213.886000, 2104.392061, 2104.392061, 0.000000, X, Y) && !ellipse(24057.713715, 9701.545502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17820.149841, 26999.170227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17615.845337, 26489.978088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31524.463226, 26142.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19810.522000, 18090.488000, 1741.536050, 1741.536050, 0.000000, X, Y) && !ellipse(22248.451965, 17616.227661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.779907, 17535.971436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25869.335785, 17562.643860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21115.538000, 17854.626000, 1560.560045, 400.267212, 89.612804, X, Y) && !ellipse(23938.457764, 8220.474579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24392.250061, 15528.477234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24309.211365, 12211.850479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24135.421112, 11694.726440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24102.592000, 8488.866000, 3519.496101, 3519.496101, 0.000000, X, Y) && !ellipse(32284.094600, 27592.530000, 1482.176043, 1482.176043, 0.000000, X, Y) && !ellipse(31607.318726, 26997.927673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32290.524139, 25878.394745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17320.834000, 25633.654000, 1623.000047, 1000.464029, 90.476076, X, Y) && !ellipse(16986.673752, 25398.636261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32282.932000, 24837.141580, 1496.600043, 1219.096035, 92.322130, X, Y) && !ellipse(31668.336609, 24361.024261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17833.853775, 23879.725861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32983.084000, 23337.819800, 2669.784077, 1319.208038, 5.868800, X, Y) && !ellipse(31866.858459, 23359.472870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17793.576981, 23351.125458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32481.182000, 23378.063600, 1521.200044, 1148.584033, 137.855600, X, Y) && !ellipse(32486.858246, 22563.152588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17485.218000, 22612.312200, 1663.224048, 1663.224048, 0.000000, X, Y) && !ellipse(32253.361694, 21870.350571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17742.997345, 22058.012024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31405.809967, 21271.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17457.665329, 21267.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31829.911072, 20915.049789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17690.945496, 20663.315842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31563.476000, 20640.666000, 3231.008093, 3231.008093, 0.000000, X, Y) && !ellipse(17018.056198, 20045.256882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32999.114000, 19907.816000, 1615.504046, 1615.504046, 0.000000, X, Y) && !ellipse(31765.531921, 19964.994019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17650.635513, 20045.676376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22768.576000, 7813.906000, 2232.984064, 1286.512037, 4.042040, X, Y) && !ellipse(20174.848000, 17996.014000, 1720.928050, 1720.928050, 0.000000, X, Y) && !ellipse(19374.664185, 17838.149612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18552.396301, 17859.632782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18759.486000, 17375.020000, 1819.096052, 961.320028, 78.474000, X, Y) && !ellipse(27527.178558, 17394.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19382.678391, 17448.275818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28559.700867, 17266.997055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21690.038239, 17692.053970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19868.889923, 17451.791077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20596.902939, 17365.043304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20422.933472, 16483.699692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19830.505800, 16831.860000, 1722.016050, 1722.016050, 0.000000, X, Y) && !ellipse(24557.931854, 8219.132462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21938.375076, 17110.901245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21222.681600, 16779.490000, 926.816027, 926.816027, 0.000000, X, Y) && !ellipse(23278.032501, 16838.297440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18392.278122, 16749.778763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18773.712200, 16861.168800, 1791.664052, 890.984026, 74.437000, X, Y) && !ellipse(19814.977000, 16146.378000, 1761.608051, 1761.608051, 0.000000, X, Y) && !ellipse(19071.622000, 14415.392000, 3522.024101, 3522.024101, 0.000000, X, Y) && !ellipse(24217.482758, 14220.678833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24212.274400, 13390.912000, 1258.720036, 1001.296029, 333.715000, X, Y) && !ellipse(24219.604126, 13094.852158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24217.480103, 12732.602615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24944.140381, 12310.847229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.798800, 10646.249560, 2056.232059, 1288.352037, 88.509450, X, Y) && !ellipse(24785.011200, 10129.437988, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 03:00:11 2013] Writing fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2.gif
[Sat Jun  1 03:01:18 2013] Mean detx,y = (7405.42, 823.90) 
[Sat Jun  1 03:01:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 03:02:49 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 03:02:50 2013] Setting source spectrum file to fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  1 03:02:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun  1 06:12:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 06:12:43 2013] rmf not generated due to insufficient counts
[Sat Jun  1 15:24:07 2013] Updating aperture counts using extracted products
[Sat Jun  1 15:24:07 2013] Total counts from fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 21551.00
[Sat Jun  1 15:24:07 2013] Total counts from fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 72118.00
[Sat Jun  1 15:24:07 2013] Got source and background scale factors 3685821.000000, 46012480.000000
[Sat Jun  1 15:24:07 2013] User source parameters:
  Position = (266.4, 201.0) = 5 34 37.58 21 55 11.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 15774.0 +/- 147.8
  Background aperture counts = 5777.0
  Rate = 0.7 +/- 0.007

[Sat Jun  1 15:24:07 2013] Updating counts from extracted products
[Sat Jun  1 15:24:07 2013] Set source signif. to 15774.00/76.01 = 207.53
[Sat Jun  1 15:24:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 15:24:32 2013] Using photon index=1.80, rate=0.742, arf fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2.arf
[Sat Jun  1 15:24:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 15:24:32 2013] Updating source flux to 1.3e-11
[Sat Jun  1 15:25:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 15:26:46 2013] xmm0611181701/analysis//spectral/fullrun_mos1_xmm0611181701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete