[Tue Sep  4 23:58:21 2012] Detection parameters:
  Position = (297.9, 396.6) = 5 34 35.61 22 6 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1605.6 +/- 51.4
  Background counts = 409.3
  Rate = 0.1 +/- 0.005

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 7.12'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.703
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.99"
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src2.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src2.csv
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src2.csv
[Wed Sep  5 12:11:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Sep  5 12:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:15 2012] Warning, spatial fit 2 centroid is now closest to src. 53
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:16 2012] Source is confused with source 64
[Wed Sep  5 21:35:20 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Wed Sep  5 21:35:20 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.703
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.99"
[Thu Sep  6 05:21:40 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src2.ximg exists
[Thu Sep  6 05:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src2.csv
[Thu Sep  6 05:21:40 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Sep  6 05:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src2.csv
[Thu Sep  6 05:21:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Sep  6 05:21:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:14 2012] Warning, spatial fit 2 centroid is now closest to src. 63
[Thu Sep  6 05:22:14 2012] Spatial fit model total counts = 9023.700000, observed total counts = 8249.000000
[Thu Sep  6 05:22:14 2012] Offset between fit and detection position for source 66 = 5.732649 pixels
[Thu Sep  6 05:22:14 2012] Warning, changing simple spatial fit ID from 2 to 13
[Thu Sep  6 05:22:14 2012] 9030.660000 total counts/ 7944.260000 bgd. counts: snr = 12.188858
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 5.732649 pixels
  Position = (293.2, 399.8) = 5 34 37.10 22 6 40.4
  Extent = 14.0 (12.5-16.8)", rotation angle = 0
  Source counts = 1086.4 +/- 95.0
  Background counts = 7944.3
  Rate = 0.06 +/- 0.005
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 06:44:59 2012] Counts = 1086.400000, rescaling region sizes by 2.000000
[Thu Sep  6 06:44:59 2012] XMMSAS src. selection expression = ellipse(25457.606000, 34737.558000, 1675.620048, 1675.620048, 0.000000, X, Y)
[Thu Sep  6 06:44:59 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src66_src.reg
[Thu Sep  6 06:44:59 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (197, 304) - (389, 496)
[Thu Sep  6 06:44:59 2012] XMMSAS bgd. selection expression = annulus(25457.606000, 34737.558000, 5585.400161, 11170.800321, X, Y) && !ellipse(35632.459961, 26621.394073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26194.320400, 37815.424000, 1402.960040, 1402.960040, 0.000000, X, Y) && !ellipse(26354.951000, 37016.738000, 3602.352104, 3602.352104, 0.000000, X, Y) && !ellipse(26271.493200, 36033.448000, 640.138418, 640.138418, 0.000000, X, Y) && !ellipse(18683.268000, 30887.692000, 1644.368047, 1644.368047, 0.000000, X, Y) && !ellipse(26382.463800, 36417.880000, 926.336027, 926.336027, 0.000000, X, Y) && !ellipse(24791.146973, 34313.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.714874, 35200.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.682200, 34784.590000, 1666.216048, 422.805612, 354.661000, X, Y) && !ellipse(33970.106293, 26431.216980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28682.804000, 34989.176000, 1264.648036, 193.440006, -0.000000, X, Y) && !ellipse(23804.854034, 34258.965515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19217.463882, 28165.922852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33465.958710, 31291.035706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.234421, 28241.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26321.464000, 37829.886000, 1841.816053, 1841.816053, 0.000000, X, Y) && !ellipse(29313.834000, 34973.240000, 1707.888049, 372.723211, 355.369000, X, Y) && !ellipse(33847.688202, 27441.989288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.091431, 34953.141510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22768.771332, 34873.936676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.134000, 40142.406000, 666.573619, 666.573619, 0.000000, X, Y) && !ellipse(25505.388000, 35878.294000, 848.960024, 848.960024, 0.000000, X, Y) && !ellipse(33832.793488, 26836.302765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26126.505000, 39151.556000, 2873.256083, 2873.256083, 0.000000, X, Y) && !ellipse(25650.654297, 41710.544189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25890.038400, 39490.827800, 741.365621, 741.365621, 0.000000, X, Y) && !ellipse(34026.480530, 25348.278320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20000.478485, 27175.079193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25641.451965, 40751.967102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.933075, 34286.386658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33546.599915, 29794.188599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22420.280151, 34100.093872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33406.236481, 30321.607513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34782.462000, 26935.642000, 928.672027, 928.672027, 0.000000, X, Y) && !ellipse(33804.466980, 28313.993835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34443.405090, 31370.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19321.456070, 29098.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19618.699882, 29344.925427, 2245.493714, 1675.098141, -0.000000, X, Y) && !ellipse(25373.063019, 43376.606934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25595.966003, 41197.865997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20115.039017, 26144.256104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29993.414032, 35010.322876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18655.027786, 30300.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18639.866241, 28119.977570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21732.241257, 34017.965851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19037.786102, 32021.399750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.532578, 27691.203613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.643494, 24409.967072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33951.351166, 32346.091248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18934.732000, 29353.822200, 1516.704044, 1516.704044, 0.000000, X, Y) && !ellipse(25330.513519, 44162.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34343.440582, 25783.477448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.434479, 42232.995544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33290.193115, 32238.193512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19691.571136, 26492.526917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27809.939178, 35290.656799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.011810, 25566.574829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25622.621400, 42751.773200, 1289.896037, 781.266422, -0.000000, X, Y) && !ellipse(20674.120483, 23769.056274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25418.750763, 38675.975800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28151.086000, 35576.668000, 632.323218, 632.323218, 0.000000, X, Y) && !ellipse(20435.498398, 23355.893890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29543.949432, 35437.336548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33217.270081, 33383.254547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19300.580902, 30271.477905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.600433, 35542.183655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24932.926000, 44105.942000, 2193.208063, 2193.208063, 0.000000, X, Y) && !ellipse(34243.754852, 22841.829773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.768646, 41362.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34729.901337, 24223.610565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24260.321655, 35463.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.467407, 39609.372589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.285431, 41800.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19566.422348, 30909.648712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33576.076050, 30745.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23296.564606, 34176.951660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18233.709152, 28231.964050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.824127, 36572.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20044.407272, 24919.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18146.443649, 30851.097351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21570.998672, 34640.734833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24842.812000, 42848.542000, 2117.640061, 2117.640061, 0.000000, X, Y) && !ellipse(28006.586578, 36085.835419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25713.751068, 42219.067261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18760.586441, 26043.309235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18529.305511, 29747.337952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22117.731598, 35258.321198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.779663, 36045.253296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21359.951721, 34059.902039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17601.841385, 28829.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.584732, 34448.786835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20735.897705, 35088.391357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23529.267303, 35371.436066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18868.607635, 32849.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19253.734238, 25813.351837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33880.954200, 32741.122000, 1714.712049, 554.043216, 111.513000, X, Y) && !ellipse(17697.188797, 27989.708557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29050.923767, 35487.373230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23383.625671, 36706.323730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36024.565308, 24223.108765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17564.386887, 31634.291168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22799.341339, 35299.609558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20739.783340, 34001.008179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17831.529297, 30092.895325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19298.875046, 32412.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20655.727768, 22844.898987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23639.809448, 36045.800232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22273.502167, 34845.883636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35598.666748, 23209.304413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17071.204575, 27909.954132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32974.056122, 32968.780579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.968140, 37617.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32803.611206, 33785.895050, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:44:59 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src66.gif
[Thu Sep  6 06:46:46 2012] Mean detx,y = (517.58, 7531.12) 
[Thu Sep  6 06:46:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 06:48:08 2012] grppha failed
[Thu Sep  6 06:48:09 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src66_src.pi.gz
[Thu Sep  6 06:48:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Thu Sep  6 08:02:42 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:42 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src66_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Flag c found in src. 66 procflags, skipping spectral fitting
[Thu Sep  6 08:02:48 2012] Source 66 has no response, skipping
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src66_pl.csv not found, spectral fit skipped or did not complete