[Tue Sep  4 23:58:21 2012] Detection parameters:
  Position = (304.5, 399.8) = 5 34 33.56 22 6 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1521.3 +/- 51.7
  Background counts = 415.3
  Rate = 0.1 +/- 0.005

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 7.36'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.721
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.11"
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src3.csv
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src3.csv
[Wed Sep  5 12:11:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Sep  5 12:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:15 2012] Warning, spatial fit 3 centroid is now closest to src. 39
[Wed Sep  5 12:12:15 2012] Spatial fit model total counts = 9366.520000, observed total counts = 9157.000000
[Wed Sep  5 12:12:15 2012] Offset between fit and detection position for source 64 = 2.337470 pixels
[Wed Sep  5 12:12:15 2012] Warning, changing simple spatial fit ID from 3 to 4
[Wed Sep  5 12:12:15 2012] 9178.227000 total counts/ 8899.360000 bgd. counts: snr = 2.956091
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 2.337470 pixels
  Position = (304.8, 397.5) = 5 34 33.46 22 6 30.2
  Extent = 7.5 (5.0-8.9)", rotation angle = 0
  Source counts = 278.9 +/- 95.8
  Background counts = 8899.4
  Rate = 0.01 +/- 0.005
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:16 2012] Source is confused with source 66
[Wed Sep  5 21:35:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Wed Sep  5 21:35:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.651
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.55"
[Thu Sep  6 05:21:40 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Sep  6 05:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src3.csv
[Thu Sep  6 05:21:40 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Sep  6 05:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src3.csv
[Thu Sep  6 05:21:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep  6 05:21:42 2012] Fit fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep  6 05:22:14 2012] Spatial fit model total counts = 6402.670000, observed total counts = 6571.000000
[Thu Sep  6 05:22:14 2012] Offset between fit and detection position for source 64 = 3.240425 pixels
[Thu Sep  6 05:22:14 2012] 6353.358500 total counts/ 6281.210000 bgd. counts: snr = 0.910344
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 3.240425 pixels
  Position = (303.3, 400.4) = 5 34 33.93 22 6 42.7
  Extent = 14.7 (14.6-14.8)", rotation angle = 0
  Source counts = 72.1 +/- 79.7
  Background counts = 6281.2
  Rate = 0.004 +/- 0.004
  Deleting source due to low Poisson probability