[Tue Sep  4 23:58:21 2012] Detection parameters:
  Position = (340.0, 402.8) = 5 34 22.45 22 6 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 600.7 +/- 52.2
  Background counts = 485.0
  Rate = 0.06 +/- 0.005

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 8.15'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 23, frac = 0.677
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.50"
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src31.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src31.csv
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Sep  5 12:11:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src31.csv
[Wed Sep  5 12:11:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:25 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Sep  5 12:11:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed Sep  5 12:11:25 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Sep  5 12:11:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed Sep  5 12:11:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:16 2012] Warning, spatial fit 31 centroid is now closest to src. 44
[Wed Sep  5 12:12:16 2012] Spatial fit model total counts = 5603.270000, observed total counts = 5660.000000
[Wed Sep  5 12:12:16 2012] Offset between fit and detection position for source 56 = 2.469501 pixels
[Wed Sep  5 12:12:16 2012] Warning, changing simple spatial fit ID from 31 to 98
[Wed Sep  5 12:12:16 2012] 5548.243000 total counts/ 5061.330000 bgd. counts: snr = 6.844142
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 2.469501 pixels
  Position = (337.5, 402.5) = 5 34 23.22 22 6 52.2
  Extent = 21.3 (19.6-42.7)" x 4.7 (3.8-5.9)", rotation angle = 355 (355-355) degrees
  Source counts = 486.9 +/- 74.5
  Background counts = 5061.3
  Rate = 0.03 +/- 0.004
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.33
[Wed Sep  5 12:12:16 2012] Source is asymmetric
[Wed Sep  5 12:12:17 2012] Source is confused with source 60
[Wed Sep  5 21:35:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Wed Sep  5 21:35:20 2012] source mask rpix=3.0, npix_max = 48, mask sum = 35, frac = 0.719
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 13.00"
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src31.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src31.csv
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src31.csv
[Thu Sep  6 05:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu Sep  6 05:21:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:15 2012] Warning, spatial fit 31 centroid is now closest to src. 37
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.33
[Thu Sep  6 05:22:15 2012] Source is asymmetric
[Thu Sep  6 06:45:01 2012] XMMSAS src. selection expression = ellipse(29313.834000, 34973.240000, 1280.916037, 279.542408, 355.369000, X, Y)
[Thu Sep  6 06:45:01 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src56_src.reg
[Thu Sep  6 06:45:01 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (264, 329) - (411, 476)
[Thu Sep  6 06:45:01 2012] XMMSAS bgd. selection expression = annulus(29313.834000, 34973.240000, 2134.860061, 4269.720123, X, Y) && !ellipse(25457.606000, 34737.558000, 1117.080032, 1117.080032, 0.000000, X, Y) && !ellipse(26194.320400, 37815.424000, 1402.960040, 1402.960040, 0.000000, X, Y) && !ellipse(26354.951000, 37016.738000, 3602.352104, 3602.352104, 0.000000, X, Y) && !ellipse(26271.493200, 36033.448000, 640.138418, 640.138418, 0.000000, X, Y) && !ellipse(26382.463800, 36417.880000, 926.336027, 926.336027, 0.000000, X, Y) && !ellipse(24791.146973, 34313.388306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.714874, 35200.237122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.682200, 34784.590000, 1666.216048, 422.805612, 354.661000, X, Y) && !ellipse(28682.804000, 34989.176000, 1264.648036, 193.440006, -0.000000, X, Y) && !ellipse(33465.958710, 31291.035706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26321.464000, 37829.886000, 1841.816053, 1841.816053, 0.000000, X, Y) && !ellipse(25505.388000, 35878.294000, 848.960024, 848.960024, 0.000000, X, Y) && !ellipse(26126.505000, 39151.556000, 2873.256083, 2873.256083, 0.000000, X, Y) && !ellipse(25890.038400, 39490.827800, 741.365621, 741.365621, 0.000000, X, Y) && !ellipse(24258.933075, 34286.386658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33406.236481, 30321.607513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34443.405090, 31370.312225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29993.414032, 35010.322876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33951.351166, 32346.091248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33290.193115, 32238.193512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27809.939178, 35290.656799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25418.750763, 38675.975800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28151.086000, 35576.668000, 632.323218, 632.323218, 0.000000, X, Y) && !ellipse(29543.949432, 35437.336548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33217.270081, 33383.254547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25043.600433, 35542.183655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24260.321655, 35463.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.467407, 39609.372589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33576.076050, 30745.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.824127, 36572.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.586578, 36085.835419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.779663, 36045.253296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33880.954200, 32741.122000, 1714.712049, 554.043216, 111.513000, X, Y) && !ellipse(29050.923767, 35487.373230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32974.056122, 32968.780579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.968140, 37617.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32803.611206, 33785.895050, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:01 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src56.gif
[Thu Sep  6 07:07:53 2012] Mean detx,y = (-3195.09, 6979.60) 
[Thu Sep  6 07:07:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:08:06 2012] grppha failed
[Thu Sep  6 07:08:06 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src56_src.pi.gz
[Thu Sep  6 07:08:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Thu Sep  6 08:02:42 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:42 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src56_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Flag c found in src. 56 procflags, skipping spectral fitting
[Thu Sep  6 08:02:48 2012] Source 56 has no response, skipping
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete