[Tue Sep  4 23:58:20 2012] Detection parameters:
  Position = (292.2, 499.1) = 5 34 37.40 22 13 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 778.4 +/- 41.3
  Background counts = 134.8
  Rate = 0.04 +/- 0.002

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 14.56'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Wed Sep  5 05:33:27 2012] source mask rpix=3.2, npix_max = 53, mask sum = 52, frac = 0.975
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 13.71"
[Wed Sep  5 12:11:23 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src65.ximg exists
[Wed Sep  5 12:11:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src65.csv
[Wed Sep  5 12:11:23 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src65_1.ximg exists
[Wed Sep  5 12:11:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src65.csv
[Wed Sep  5 12:11:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Wed Sep  5 12:11:26 2012] Fit fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Wed Sep  5 12:12:16 2012] Warning, spatial fit 65 centroid is now closest to src. 3
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:17 2012] Source is confused with source 7
[Wed Sep  5 12:12:17 2012] Source is confused with source 3
[Wed Sep  5 12:12:17 2012] Source is confused with source 6
[Wed Sep  5 21:35:20 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Wed Sep  5 21:35:20 2012] source mask rpix=3.2, npix_max = 53, mask sum = 52, frac = 0.975
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 13.71"
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src62.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src62.csv
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src62.csv
[Thu Sep  6 05:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu Sep  6 05:21:43 2012] Fit fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Thu Sep  6 05:22:15 2012] Warning, spatial fit 62 centroid is now closest to src. 3
[Thu Sep  6 05:22:15 2012] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.062399 pixels away
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 06:45:03 2012] XMMSAS src. selection expression = ellipse(25373.063019, 43376.606934, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 06:45:03 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src4_src.reg
[Thu Sep  6 06:45:03 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (255, 462) - (330, 537)
[Thu Sep  6 06:45:03 2012] XMMSAS bgd. selection expression = annulus(25373.063019, 43376.606934, 1087.500000, 2175.000000, X, Y) && !ellipse(26126.505000, 39151.556000, 2873.256083, 2873.256083, 0.000000, X, Y) && !ellipse(25650.654297, 41710.544189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25641.451965, 40751.967102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25595.966003, 41197.865997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25330.513519, 44162.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.434479, 42232.995544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25622.621400, 42751.773200, 1289.896037, 781.266422, -0.000000, X, Y) && !ellipse(24932.926000, 44105.942000, 2193.208063, 2193.208063, 0.000000, X, Y) && !ellipse(25218.768646, 41362.926514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25131.285431, 41800.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24842.812000, 42848.542000, 2117.640061, 2117.640061, 0.000000, X, Y) && !ellipse(25713.751068, 42219.067261, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:03 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src4.gif
[Thu Sep  6 07:25:05 2012] Mean detx,y = (-209.29, 15738.23) 
[Thu Sep  6 07:25:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:25:13 2012] grppha failed
[Thu Sep  6 07:25:13 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Sep  6 07:25:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Sep  6 08:01:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 08:01:51 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:43 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:43 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src4_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete