[Tue Sep  4 23:58:23 2012] Detection parameters:
  Position = (335.2, 125.2) = 5 34 23.98 21 46 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2242.3 +/- 527.4
  Background counts = 97.6
  Rate = 0.1 +/- 0.03

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 12.84'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Wed Sep  5 05:33:27 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.881
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.85"
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src6.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src6.csv
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src6.csv
[Wed Sep  5 12:11:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Sep  5 12:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:15 2012] Warning, spatial fit 6 centroid is now closest to src. 41
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 21:35:20 2012] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Wed Sep  5 21:35:20 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.881
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 12.85"
[Thu Sep  6 05:21:40 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src6.ximg exists
[Thu Sep  6 05:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src6.csv
[Thu Sep  6 05:21:40 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Sep  6 05:21:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src6.csv
[Thu Sep  6 05:21:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Sep  6 05:21:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:14 2012] Warning, spatial fit 6 centroid is now closest to src. 41
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 06:44:59 2012] Counts = 2242.337158, rescaling region sizes by 2.000000
[Thu Sep  6 06:44:59 2012] XMMSAS src. selection expression = ellipse(29110.369873, 10848.194244, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Sep  6 06:44:59 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src226_src.reg
[Thu Sep  6 06:44:59 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (260, 50) - (410, 200)
[Thu Sep  6 06:45:00 2012] XMMSAS bgd. selection expression = annulus(29110.369873, 10848.194244, 4350.000000, 8700.000000, X, Y) && !ellipse(28530.848663, 14608.141861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.752380, 19572.406784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28176.657135, 20286.957474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.035431, 20023.879913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26936.054871, 19389.783249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28698.958000, 19457.852000, 866.656025, 866.656025, 0.000000, X, Y) && !ellipse(29942.126831, 20153.056381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.591600, 19691.902000, 916.616026, 916.616026, 0.000000, X, Y) && !ellipse(31131.160461, 19234.352524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27447.652000, 19905.468000, 1143.456033, 474.011214, 311.147900, X, Y) && !ellipse(26487.155792, 20385.427200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28375.367493, 18751.344284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32628.740989, 20010.335661, 1597.336046, 528.333006, 356.711924, X, Y) && !ellipse(28173.327728, 16718.858292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28335.119904, 19929.817535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25625.320007, 20296.419998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.004000, 18669.156000, 1244.928036, 1244.928036, 0.000000, X, Y) && !ellipse(32810.832000, 20043.408000, 1624.784047, 444.639213, -0.000000, X, Y) && !ellipse(27915.994324, 18496.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.666600, 19833.800000, 1570.624045, 240.769607, -0.000000, X, Y) && !ellipse(31394.749115, 20328.387878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24717.321228, 19321.826447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.793976, 18066.386551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24190.329773, 20186.481873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32587.467800, 21170.212000, 2069.424060, 2069.424060, 0.000000, X, Y) && !ellipse(27795.740082, 18991.119980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28601.124634, 13310.686127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.316000, 19113.080000, 563.629616, 563.629616, 0.000000, X, Y) && !ellipse(25079.424744, 19975.057907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33286.890259, 20074.233871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28911.144440, 14840.475510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.371826, 16576.785019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28791.994690, 11933.270203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27298.564606, 18071.060730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28873.432404, 18229.238083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.194702, 17463.037781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.169373, 17501.826431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28454.612152, 15957.832642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28449.564941, 15551.444565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29115.629486, 13090.862976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28848.639740, 14044.614548, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:00 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src226.gif
[Thu Sep  6 06:51:07 2012] Mean detx,y = (-294.93, -16523.36) 
[Thu Sep  6 06:51:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 06:51:55 2012] grppha failed
[Thu Sep  6 06:51:55 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src226_src.pi.gz
[Thu Sep  6 06:51:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src226_bgd.pi.gz
[Thu Sep  6 08:01:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 08:01:46 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:42 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:42 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src226_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src226_pl.csv not found, spectral fit skipped or did not complete