[Tue Sep  4 23:58:23 2012] Detection parameters:
  Position = (326.7, 216.1) = 5 34 26.61 21 53 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 476.3 +/- 38.8
  Background counts = 467.8
  Rate = 0.04 +/- 0.003

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 6.31'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.026
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 9.58"
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src77.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src77.csv
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src77_1.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src77.csv
[Wed Sep  5 12:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Wed Sep  5 12:11:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src77.csv
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Wed Sep  5 12:11:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src77.csv
[Wed Sep  5 12:11:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:16 2012] Spatial fit model total counts = 6805.380000, observed total counts = 6184.000000
[Wed Sep  5 12:12:16 2012] Poor agreement between spatial fit and data for source 213
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:17 2012] Source is confused with source 204
[Wed Sep  5 12:12:17 2012] Source is confused with source 215
[Wed Sep  5 12:12:17 2012] Source is confused with source 211
[Wed Sep  5 21:35:20 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Wed Sep  5 21:35:20 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.026
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 9.58"
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src73.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src73.csv
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src73_1.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src73.csv
[Thu Sep  6 05:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Thu Sep  6 05:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src73.csv
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Thu Sep  6 05:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src73.csv
[Thu Sep  6 05:21:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:14 2012] Spatial fit model total counts = 8254.120000, observed total counts = 7360.000000
[Thu Sep  6 05:22:14 2012] Poor agreement between spatial fit and data for source 213
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep  6 05:22:15 2012] Source 213 is offset by 0.946891 and -4.145606 pixels which is larger than
2 X fitted extent = 1.220529 x 1.220529, not incorporating fit results
[Thu Sep  6 05:22:15 2012] Spatial fit model total counts = 6811.730000, observed total counts = 6184.000000
[Thu Sep  6 05:22:15 2012] Poor agreement between spatial fit and data for source 213
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 06:45:04 2012] XMMSAS src. selection expression = ellipse(28375.367493, 18751.344284, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 06:45:04 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src213_src.reg
[Thu Sep  6 06:45:04 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (289, 179) - (364, 254)
[Thu Sep  6 06:45:04 2012] XMMSAS bgd. selection expression = annulus(28375.367493, 18751.344284, 1087.500000, 2175.000000, X, Y) && !ellipse(27464.859711, 20512.296448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.752380, 19572.406784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28176.657135, 20286.957474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.035431, 20023.879913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26936.054871, 19389.783249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30458.742432, 20538.627701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28698.958000, 19457.852000, 866.656025, 866.656025, 0.000000, X, Y) && !ellipse(29942.126831, 20153.056381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.591600, 19691.902000, 916.616026, 916.616026, 0.000000, X, Y) && !ellipse(31131.160461, 19234.352524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29817.451965, 20798.049286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.421631, 20582.379929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30580.932190, 20928.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27447.652000, 19905.468000, 1143.456033, 474.011214, 311.147900, X, Y) && !ellipse(26487.155792, 20385.427200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.327728, 16718.858292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28335.119904, 19929.817535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25625.320007, 20296.419998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.004000, 18669.156000, 1244.928036, 1244.928036, 0.000000, X, Y) && !ellipse(27915.994324, 18496.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.666600, 19833.800000, 1570.624045, 240.769607, -0.000000, X, Y) && !ellipse(31394.749115, 20328.387878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.793976, 18066.386551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32587.467800, 21170.212000, 2069.424060, 2069.424060, 0.000000, X, Y) && !ellipse(27795.740082, 18991.119980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.316000, 19113.080000, 563.629616, 563.629616, 0.000000, X, Y) && !ellipse(28475.371826, 16576.785019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27298.564606, 18071.060730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28873.432404, 18229.238083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.194702, 17463.037781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.169373, 17501.826431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28454.612152, 15957.832642, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:04 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src213.gif
[Thu Sep  6 07:27:41 2012] Mean detx,y = (-494.26, -9034.30) 
[Thu Sep  6 07:27:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:27:50 2012] grppha failed
[Thu Sep  6 07:27:51 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src213_src.pi.gz
[Thu Sep  6 07:27:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src213_bgd.pi.gz
[Thu Sep  6 08:01:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 08:01:52 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:43 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:43 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src213_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src213_pl.csv not found, spectral fit skipped or did not complete