[Tue Sep  4 23:58:23 2012] Detection parameters:
  Position = (317.0, 230.0) = 5 34 29.64 21 54 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 607.8 +/- 40.8
  Background counts = 544.8
  Rate = 0.05 +/- 0.003

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 5.14'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 28, frac = 1.061
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.00"
[Wed Sep  5 12:11:23 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src55.ximg exists
[Wed Sep  5 12:11:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src55.csv
[Wed Sep  5 12:11:23 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src55_1.ximg exists
[Wed Sep  5 12:11:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src55.csv
[Wed Sep  5 12:11:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Wed Sep  5 12:11:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src55.csv
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Wed Sep  5 12:11:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src55.csv
[Wed Sep  5 12:11:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:16 2012] Spatial fit model total counts = 7331.950000, observed total counts = 7353.000000
[Wed Sep  5 12:12:16 2012] Offset between fit and detection position for source 202 = 1.392099 pixels
[Wed Sep  5 12:12:16 2012] Warning, changing simple spatial fit ID from 55 to 26
[Wed Sep  5 12:12:16 2012] 7343.676000 total counts/ 7154.410000 bgd. counts: snr = 2.237617
Spatial fit parameters:
  Offset between fit and detection position for source 202 = 1.392099 pixels
  Position = (315.9, 229.2) = 5 34 29.98 21 54 18.0
  Extent = 10.6 (6.1-18.4)", rotation angle = 0
  Source counts = 189.3 +/- 85.7
  Background counts = 7154.4
  Rate = 0.01 +/- 0.004
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:17 2012] Source is confused with source 188
[Wed Sep  5 21:35:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Wed Sep  5 21:35:20 2012] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.012
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 10.62"
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src53.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src53.csv
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src53_1.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src53.csv
[Thu Sep  6 05:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Thu Sep  6 05:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src53.csv
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Thu Sep  6 05:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src53.csv
[Thu Sep  6 05:21:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:15 2012] Spatial fit model total counts = 7320.940000, observed total counts = 7353.000000
[Thu Sep  6 05:22:15 2012] Offset between fit and detection position for source 202 = 0.208606 pixels
[Thu Sep  6 05:22:15 2012] Warning, changing simple spatial fit ID from 53 to 26
[Thu Sep  6 05:22:15 2012] 7233.825000 total counts/ 7025.130000 bgd. counts: snr = 2.489917
Spatial fit parameters:
  Offset between fit and detection position for source 202 = 0.208606 pixels
  Position = (316.0, 229.4) = 5 34 29.95 21 54 18.8
  Extent = 14.3 (9.4-18.4)" x 5.9 (2.3-12.8)", rotation angle = 311
  Source counts = 208.7 +/- 85.1
  Background counts = 7025.1
  Rate = 0.01 +/- 0.004
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73
[Thu Sep  6 06:45:03 2012] XMMSAS src. selection expression = ellipse(27447.652000, 19905.468000, 857.592025, 355.508410, 311.147900, X, Y)
[Thu Sep  6 06:45:03 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src202_src.reg
[Thu Sep  6 06:45:03 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (267, 180) - (365, 279)
[Thu Sep  6 06:45:03 2012] XMMSAS bgd. selection expression = annulus(27447.652000, 19905.468000, 1429.320041, 2858.640082, X, Y) && !ellipse(27464.859711, 20512.296448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.752380, 19572.406784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28176.657135, 20286.957474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.035431, 20023.879913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26936.054871, 19389.783249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30458.742432, 20538.627701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28698.958000, 19457.852000, 866.656025, 866.656025, 0.000000, X, Y) && !ellipse(29942.126831, 20153.056381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.591600, 19691.902000, 916.616026, 916.616026, 0.000000, X, Y) && !ellipse(31131.160461, 19234.352524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29817.451965, 20798.049286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.421631, 20582.379929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30580.932190, 20928.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.155792, 20385.427200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28375.367493, 18751.344284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28173.327728, 16718.858292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28335.119904, 19929.817535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25625.320007, 20296.419998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.004000, 18669.156000, 1244.928036, 1244.928036, 0.000000, X, Y) && !ellipse(27915.994324, 18496.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.666600, 19833.800000, 1570.624045, 240.769607, -0.000000, X, Y) && !ellipse(24717.321228, 19321.826447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.793976, 18066.386551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24190.329773, 20186.481873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27795.740082, 18991.119980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.316000, 19113.080000, 563.629616, 563.629616, 0.000000, X, Y) && !ellipse(25079.424744, 19975.057907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.371826, 16576.785019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27298.564606, 18071.060730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28873.432404, 18229.238083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.194702, 17463.037781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.169373, 17501.826431, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:03 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src202.gif
[Thu Sep  6 07:18:36 2012] Mean detx,y = (407.59, -7702.34) 
[Thu Sep  6 07:18:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:18:44 2012] grppha failed
[Thu Sep  6 07:18:44 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src202_src.pi.gz
[Thu Sep  6 07:18:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src202_bgd.pi.gz
[Thu Sep  6 08:02:42 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:42 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src202_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Flag c found in src. 202 procflags, skipping spectral fitting
[Thu Sep  6 08:02:48 2012] Source 202 has no response, skipping
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src202_pl.csv not found, spectral fit skipped or did not complete