[Tue Sep  4 23:58:23 2012] Detection parameters:
  Position = (350.7, 236.6) = 5 34 19.13 21 54 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 716.2 +/- 57.5
  Background counts = 400.2
  Rate = 0.06 +/- 0.005

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 5.87'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.711
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.36"
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src29.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src29.csv
[Wed Sep  5 12:11:22 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Sep  5 12:11:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src29.csv
[Wed Sep  5 12:11:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:25 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Sep  5 12:11:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed Sep  5 12:11:25 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Sep  5 12:11:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src29.csv
[Wed Sep  5 12:11:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:16 2012] Warning, spatial fit 29 centroid is now closest to src. 200
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:17 2012] Source is confused with source 195
[Wed Sep  5 12:12:17 2012] Source is confused with source 178
[Wed Sep  5 12:12:17 2012] Source is confused with source 200
[Wed Sep  5 21:35:20 2012] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 9.36"
[Wed Sep  5 21:35:20 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.711
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 9.36"
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src29.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src29.csv
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src29.csv
[Thu Sep  6 05:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Sep  6 05:21:42 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Sep  6 05:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu Sep  6 05:21:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:15 2012] Warning, spatial fit 29 centroid is now closest to src. 181
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 06:45:01 2012] XMMSAS src. selection expression = ellipse(30458.742432, 20538.627701, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 06:45:01 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src186_src.reg
[Thu Sep  6 06:45:01 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (313, 199) - (388, 274)
[Thu Sep  6 06:45:01 2012] XMMSAS bgd. selection expression = annulus(30458.742432, 20538.627701, 1087.500000, 2175.000000, X, Y) && !ellipse(31917.319946, 20702.894363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27464.859711, 20512.296448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.752380, 19572.406784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28176.657135, 20286.957474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29068.035431, 20023.879913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28698.958000, 19457.852000, 866.656025, 866.656025, 0.000000, X, Y) && !ellipse(29942.126831, 20153.056381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29869.591600, 19691.902000, 916.616026, 916.616026, 0.000000, X, Y) && !ellipse(31131.160461, 19234.352524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29817.451965, 20798.049286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28856.421631, 20582.379929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30580.932190, 20928.947540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27447.652000, 19905.468000, 1143.456033, 474.011214, 311.147900, X, Y) && !ellipse(28375.367493, 18751.344284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32628.740989, 20010.335661, 1597.336046, 528.333006, 356.711924, X, Y) && !ellipse(28335.119904, 19929.817535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32515.527252, 20509.382553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33108.469635, 20601.150986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29502.004000, 18669.156000, 1244.928036, 1244.928036, 0.000000, X, Y) && !ellipse(32810.832000, 20043.408000, 1624.784047, 444.639213, -0.000000, X, Y) && !ellipse(27915.994324, 18496.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.666600, 19833.800000, 1570.624045, 240.769607, -0.000000, X, Y) && !ellipse(31394.749115, 20328.387878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28388.793976, 18066.386551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31906.730000, 21070.242000, 1095.472032, 1095.472032, 0.000000, X, Y) && !ellipse(32587.467800, 21170.212000, 2069.424060, 2069.424060, 0.000000, X, Y) && !ellipse(27795.740082, 18991.119980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30326.316000, 19113.080000, 563.629616, 563.629616, 0.000000, X, Y) && !ellipse(33286.890259, 20074.233871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28873.432404, 18229.238083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.169373, 17501.826431, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:01 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src186.gif
[Thu Sep  6 07:04:06 2012] Mean detx,y = (-2700.45, -7422.84) 
[Thu Sep  6 07:04:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:04:12 2012] grppha failed
[Thu Sep  6 07:04:12 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src186_src.pi.gz
[Thu Sep  6 07:04:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src186_bgd.pi.gz
[Thu Sep  6 08:01:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 08:01:48 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:42 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:42 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src186_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src186_pl.csv not found, spectral fit skipped or did not complete