[Tue Sep  4 23:58:22 2012] Detection parameters:
  Position = (230.4, 312.9) = 5 34 56.71 22 0 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 509.7 +/- 32.2
  Background counts = 501.9
  Rate = 0.05 +/- 0.003

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 5.04'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.573
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.95"
[Wed Sep  5 12:11:23 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src47.ximg exists
[Wed Sep  5 12:11:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src47.csv
[Wed Sep  5 12:11:23 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed Sep  5 12:11:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src47.csv
[Wed Sep  5 12:11:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed Sep  5 12:11:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed Sep  5 12:11:26 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed Sep  5 12:11:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed Sep  5 12:11:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:12:16 2012] Warning, spatial fit 47 centroid is now closest to src. 143
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:17 2012] Source is confused with source 135
[Wed Sep  5 21:35:20 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Wed Sep  5 21:35:20 2012] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.573
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 8.95"
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src46.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src46.csv
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src46_1.ximg exists
[Thu Sep  6 05:21:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src46.csv
[Thu Sep  6 05:21:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Thu Sep  6 05:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Thu Sep  6 05:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu Sep  6 05:21:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:15 2012] Warning, spatial fit 46 centroid is now closest to src. 127
[Thu Sep  6 05:22:15 2012] Source 137 is offset by -8.687420 and 2.779255 pixels which is larger than
2 X fitted extent = 1.016933 x 1.016933, not incorporating fit results
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 06:45:02 2012] XMMSAS src. selection expression = ellipse(20000.478485, 27175.079193, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 06:45:02 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src137_src.reg
[Thu Sep  6 06:45:02 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (193, 275) - (268, 350)
[Thu Sep  6 06:45:02 2012] XMMSAS bgd. selection expression = annulus(20000.478485, 27175.079193, 1087.500000, 2175.000000, X, Y) && !ellipse(18683.268000, 30887.692000, 1644.368047, 1644.368047, 0.000000, X, Y) && !ellipse(19217.463882, 28165.922852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.234421, 28241.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19321.456070, 29098.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19618.699882, 29344.925427, 2245.493714, 1675.098141, -0.000000, X, Y) && !ellipse(20115.039017, 26144.256104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18639.866241, 28119.977570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.532578, 27691.203613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18934.732000, 29353.822200, 1516.704044, 1516.704044, 0.000000, X, Y) && !ellipse(19691.571136, 26492.526917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.011810, 25566.574829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18233.709152, 28231.964050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20044.407272, 24919.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18760.586441, 26043.309235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18529.305511, 29747.337952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17601.841385, 28829.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19253.734238, 25813.351837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17697.188797, 27989.708557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17831.529297, 30092.895325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17071.204575, 27909.954132, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:02 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src137.gif
[Thu Sep  6 07:16:47 2012] Mean detx,y = (7133.44, 272.93) 
[Thu Sep  6 07:16:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:16:57 2012] grppha failed
[Thu Sep  6 07:16:57 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src137_src.pi.gz
[Thu Sep  6 07:16:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src137_bgd.pi.gz
[Thu Sep  6 08:01:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 08:01:50 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:42 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:42 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src137_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src137_pl.csv not found, spectral fit skipped or did not complete