[Tue Sep  4 23:58:22 2012] Detection parameters:
  Position = (216.8, 339.0) = 5 35 1.00 22 2 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 399.7 +/- 37.3
  Background counts = 384.8
  Rate = 0.03 +/- 0.003

[Tue Sep  4 23:58:23 2012] Off-axis axis estimate = 6.61'
[Wed Sep  5 05:33:27 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 05:33:27 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Wed Sep  5 05:33:27 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.201
[Wed Sep  5 05:33:27 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 9.73"
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src80.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src80.csv
[Wed Sep  5 12:11:24 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed Sep  5 12:11:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src80.csv
[Wed Sep  5 12:11:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:27 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed Sep  5 12:11:27 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed Sep  5 12:11:27 2012] Fit fullrun_mos2_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Wed Sep  5 12:12:16 2012] Source 114 is offset by 0.536575 and 4.712982 pixels which is larger than
2 X fitted extent = 1.094832 x 1.094832, not incorporating fit results
[Wed Sep  5 12:12:16 2012] Warning, spatial fit 80 centroid is now closest to src. 104
[Wed Sep  5 12:12:16 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:12:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:12:16 2012] Assessing source extent using major
[Wed Sep  5 12:12:16 2012] Source does appear to be extended
[Wed Sep  5 12:12:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:17 2012] Source is confused with source 117
[Wed Sep  5 21:35:20 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:35:20 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Wed Sep  5 21:35:20 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.201
[Wed Sep  5 21:35:20 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 9.73"
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src75.ximg exists
[Thu Sep  6 05:21:41 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src75_1.ximg exists
[Thu Sep  6 05:21:41 2012] Fit fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_src75 appears to have run properly
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Thu Sep  6 05:21:43 2012] fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Thu Sep  6 05:21:43 2012] Fit fullrun_mos2_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Thu Sep  6 05:22:15 2012] Spatial fit model total counts = 7585.140000, observed total counts = 6936.000000
[Thu Sep  6 05:22:15 2012] Offset between fit and detection position for source 114 = 1.734948 pixels
[Thu Sep  6 05:22:15 2012] Warning, changing simple spatial fit ID from 75 to 60
[Thu Sep  6 05:22:15 2012] 7642.092000 total counts/ 7180.100000 bgd. counts: snr = 5.452168
Spatial fit parameters:
  Offset between fit and detection position for source 114 = 1.734948 pixels
  Position = (218.2, 338.0) = 5 35 0.55 22 2 11.1
  Extent = 19.0 (18.9-37.9)", rotation angle = 0
  Source counts = 462.0 +/- 87.4
  Background counts = 7180.1
  Rate = 0.02 +/- 0.005
[Thu Sep  6 05:22:15 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:15 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:15 2012] Source does appear to be extended
[Thu Sep  6 05:22:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 06:45:04 2012] XMMSAS src. selection expression = ellipse(18934.732000, 29353.822200, 1137.528033, 1137.528033, 0.000000, X, Y)
[Thu Sep  6 06:45:04 2012] Writing source region out to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src114_src.reg
[Thu Sep  6 06:45:04 2012] Extracting stamp from image fullrun_mos2_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (153, 273) - (284, 403)
[Thu Sep  6 06:45:04 2012] XMMSAS bgd. selection expression = annulus(18934.732000, 29353.822200, 1895.880055, 3791.760109, X, Y) && !ellipse(18683.268000, 30887.692000, 1644.368047, 1644.368047, 0.000000, X, Y) && !ellipse(19217.463882, 28165.922852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19648.234421, 28241.920410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20000.478485, 27175.079193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19321.456070, 29098.175323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19618.699882, 29344.925427, 2245.493714, 1675.098141, -0.000000, X, Y) && !ellipse(20115.039017, 26144.256104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18655.027786, 30300.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18639.866241, 28119.977570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19037.786102, 32021.399750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19893.532578, 27691.203613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19691.571136, 26492.526917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.011810, 25566.574829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19300.580902, 30271.477905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19566.422348, 30909.648712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18233.709152, 28231.964050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20044.407272, 24919.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18146.443649, 30851.097351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18760.586441, 26043.309235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18529.305511, 29747.337952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17601.841385, 28829.950989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18868.607635, 32849.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19253.734238, 25813.351837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17697.188797, 27989.708557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17564.386887, 31634.291168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20739.783340, 34001.008179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17831.529297, 30092.895325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19298.875046, 32412.469635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17071.204575, 27909.954132, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 06:45:04 2012] Writing fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src114.gif
[Thu Sep  6 07:28:16 2012] Mean detx,y = (7713.52, 2515.54) 
[Thu Sep  6 07:28:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 07:28:24 2012] grppha failed
[Thu Sep  6 07:28:24 2012] Setting source spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src114_src.pi.gz
[Thu Sep  6 07:28:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src114_bgd.pi.gz
[Thu Sep  6 08:02:43 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:43 2012] Error reading totcts from fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src114_src.pi.gz
[Thu Sep  6 08:02:44 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:48 2012] Flag b found in src. 114 procflags, skipping spectral fitting
[Thu Sep  6 08:02:48 2012] Flag c found in src. 114 procflags, skipping spectral fitting
[Thu Sep  6 08:02:48 2012] Source 114 has no response, skipping
[Thu Sep  6 08:02:49 2012] xmm0611181501/analysis//spectral/fullrun_mos2_xmm0611181501_pi300-10000_pass1_cl_src114_pl.csv not found, spectral fit skipped or did not complete