[Tue Sep 4 23:57:18 2012] Detection parameters: Position = (418.5, 276.6) = 5 33 57.90 21 57 48.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 308.6 +/- 33.3 Background counts = 301.6 Rate = 0.03 +/- 0.003 [Tue Sep 4 23:57:19 2012] Off-axis axis estimate = 8.85' [Wed Sep 5 00:01:41 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.85" [Wed Sep 5 00:01:41 2012] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.780 [Wed Sep 5 00:01:41 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 10.85" [Wed Sep 5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src86.ximg exists [Wed Sep 5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src86_1.ximg exists [Wed Sep 5 05:33:25 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src86 appears to have run properly [Wed Sep 5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src86.ximg exists [Wed Sep 5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists [Wed Sep 5 05:33:27 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly [Wed Sep 5 12:11:55 2012] Source 98 is offset by -3.885751 and -0.710070 pixels which is larger than 2 X fitted extent = 3.586869 x 3.586869, not incorporating fit results [Wed Sep 5 12:11:55 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 12:11:55 2012] Assessing source extent using major [Wed Sep 5 12:11:55 2012] Source does appear to be extended [Wed Sep 5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 12:12:42 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.85" [Wed Sep 5 12:12:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.780 [Wed Sep 5 12:12:42 2012] Giving source the simple spatial ID 81 for pass 1, mean size = 10.85" [Wed Sep 5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src81.ximg exists [Wed Sep 5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src81.csv [Wed Sep 5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src81_1.ximg exists [Wed Sep 5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src81.csv [Wed Sep 5 21:35:17 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src81_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src81.ximg exists [Wed Sep 5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists [Wed Sep 5 21:35:20 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly [Thu Sep 6 05:22:01 2012] Source 98 is offset by -7.341659 and -0.542305 pixels which is larger than 2 X fitted extent = 1.233595 x 1.233595, not incorporating fit results [Thu Sep 6 05:22:01 2012] Warning, spatial fit 81 centroid is now closest to src. 28 [Thu Sep 6 05:22:01 2012] Vigneting correction estimate = 1.000000 [Thu Sep 6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Sep 6 05:22:01 2012] Assessing source extent using major [Thu Sep 6 05:22:01 2012] Source does appear to be extended [Thu Sep 6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Sep 6 05:22:43 2012] XMMSAS src. selection expression = ellipse(36363.357666, 24014.869507, 652.500000, 652.500000, 0.000000, X, Y) [Thu Sep 6 05:22:43 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src98_src.reg [Thu Sep 6 05:22:43 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (381, 239) - (456, 314) [Thu Sep 6 05:22:43 2012] XMMSAS bgd. selection expression = annulus(36363.357666, 24014.869507, 1087.500000, 2175.000000, X, Y) && !ellipse(34227.166000, 27608.126000, 1626.992047, 1626.992047, 0.000000, X, Y) && !ellipse(34057.626678, 26850.491241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.298615, 26125.214233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35896.066000, 24545.282000, 702.612020, 702.612020, 0.000000, X, Y) && !ellipse(34512.287200, 25397.882600, 1399.400040, 354.975210, 83.404200, X, Y) && !ellipse(34546.184000, 24592.824000, 569.021616, 569.021616, 0.000000, X, Y) && !ellipse(34487.847626, 23428.718689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(36700.517181, 26918.669739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(35302.758423, 26738.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34699.495941, 25755.647430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35689.261658, 23017.927246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.750000, 25141.361400, 1488.808043, 1488.808043, 0.000000, X, Y) && !ellipse(34685.796800, 23945.036000, 964.208028, 356.573610, 79.991200, X, Y) && !ellipse(34901.999200, 22383.439220, 858.856025, 858.856025, 0.000000, X, Y) && !ellipse(36762.381780, 26352.156000, 1753.240050, 1753.240050, 0.000000, X, Y) && !ellipse(35484.234985, 25253.913269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35222.863281, 25089.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35882.452430, 24648.311200, 712.912021, 712.912021, 0.000000, X, Y) && !ellipse(35286.764526, 24148.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.049988, 23005.214966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.268000, 27374.176000, 1750.680050, 1750.680050, 0.000000, X, Y) && !ellipse(35699.010925, 26670.666107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35831.820801, 26224.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.984467, 23167.657623, 870.000000, 870.000000, 0.000000, X, Y) [Thu Sep 6 05:22:43 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src98.gif [Thu Sep 6 06:33:00 2012] Mean detx,y = (-4513.35, 8751.55) [Thu Sep 6 06:33:01 2012] Setting backscal keywords in source and bgd. spectrum [Thu Sep 6 06:33:13 2012] grppha failed [Thu Sep 6 06:33:13 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src98_src.pi.gz [Thu Sep 6 06:33:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src98_bgd.pi.gz [Thu Sep 6 06:44:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Sep 6 06:44:56 2012] rmf not generated due to insufficient counts [Thu Sep 6 08:02:41 2012] Updating aperture counts using extracted products [Thu Sep 6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src98_src.pi.gz [Thu Sep 6 08:02:42 2012] No arf file for this source, not re-computing flux [Thu Sep 6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Sep 6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src98_pl.csv not found, spectral fit skipped or did not complete