[Tue Sep  4 23:57:18 2012] Detection parameters:
  Position = (423.4, 300.7) = 5 33 56.38 21 59 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 273.9 +/- 54.0
  Background counts = 388.5
  Rate = 0.01 +/- 0.003

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 9.06'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.96"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.905
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 10.96"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src81.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src81.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src81_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src81.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Wed Sep  5 05:33:27 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Wed Sep  5 12:11:55 2012] Spatial fit model total counts = 6546.970000, observed total counts = 6620.000000
[Wed Sep  5 12:11:55 2012] Offset between fit and detection position for source 93 = 2.725857 pixels
[Wed Sep  5 12:11:55 2012] 6205.537000 total counts/ 5245.840000 bgd. counts: snr = 13.250328
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 2.725857 pixels
  Position = (423.1, 303.5) = 5 33 56.46 21 59 40.8
  Extent = 21.9 (21.7-43.8)", rotation angle = 0
  Source counts = 959.7 +/- 78.8
  Background counts = 5245.8
  Rate = 0.05 +/- 0.004
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 64
[Wed Sep  5 12:12:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 21.92"
[Wed Sep  5 12:12:42 2012] source mask rpix=5.0, npix_max = 122, mask sum = 109, frac = 0.888
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 21.92"
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src76.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src76.csv
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src76_1.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src76.csv
[Wed Sep  5 21:35:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Wed Sep  5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Wed Sep  5 21:35:20 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 76 centroid is now closest to src. 65
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:42 2012] XMMSAS src. selection expression = ellipse(36762.381780, 26352.156000, 1314.930038, 1314.930038, 0.000000, X, Y)
[Thu Sep  6 05:22:42 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src93_src.reg
[Thu Sep  6 05:22:42 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (348, 228) - (499, 379)
[Thu Sep  6 05:22:42 2012] XMMSAS bgd. selection expression = annulus(36762.381780, 26352.156000, 2191.550063, 4383.100126, X, Y) && !ellipse(35077.506000, 28953.446000, 617.231218, 617.231218, 0.000000, X, Y) && !ellipse(33461.246033, 30493.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.358215, 30051.726440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.000000, 29717.444977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34068.111389, 28225.435333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34227.166000, 27608.126000, 1626.992047, 1626.992047, 0.000000, X, Y) && !ellipse(34312.786000, 27229.302000, 437.258413, 437.258413, 0.000000, X, Y) && !ellipse(34057.626678, 26850.491241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.298615, 26125.214233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35896.066000, 24545.282000, 702.612020, 702.612020, 0.000000, X, Y) && !ellipse(34637.155853, 27708.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33508.282532, 31277.659668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36611.494049, 28046.050934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34512.287200, 25397.882600, 1399.400040, 354.975210, 83.404200, X, Y) && !ellipse(34546.184000, 24592.824000, 569.021616, 569.021616, 0.000000, X, Y) && !ellipse(34487.847626, 23428.718689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(34825.796000, 31404.374000, 1330.728038, 1330.728038, 0.000000, X, Y) && !ellipse(34711.820587, 30416.604462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34916.504761, 29620.082397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34584.071198, 28289.862274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36700.517181, 26918.669739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(35302.758423, 26738.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34699.495941, 25755.647430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35689.261658, 23017.927246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.750000, 25141.361400, 1488.808043, 1488.808043, 0.000000, X, Y) && !ellipse(34685.796800, 23945.036000, 964.208028, 356.573610, 79.991200, X, Y) && !ellipse(34901.999200, 22383.439220, 858.856025, 858.856025, 0.000000, X, Y) && !ellipse(34566.208160, 30934.667053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35454.568000, 28255.527600, 776.080022, 776.080022, 0.000000, X, Y) && !ellipse(35835.452881, 27881.024933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35484.234985, 25253.913269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35222.863281, 25089.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35882.452430, 24648.311200, 712.912021, 712.912021, 0.000000, X, Y) && !ellipse(35286.764526, 24148.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36363.357666, 24014.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.049988, 23005.214966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35921.162537, 27498.514862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.268000, 27374.176000, 1750.680050, 1750.680050, 0.000000, X, Y) && !ellipse(35699.010925, 26670.666107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35831.820801, 26224.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.984467, 23167.657623, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:42 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src93.gif
[Thu Sep  6 06:31:15 2012] Mean detx,y = (-2197.83, 9318.62) 
[Thu Sep  6 06:31:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 06:31:40 2012] grppha failed
[Thu Sep  6 06:31:40 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src93_src.pi.gz
[Thu Sep  6 06:31:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src93_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Flag c found in src. 93 procflags, skipping spectral fitting
[Thu Sep  6 08:02:47 2012] Source 93 has no response, skipping
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src93_pl.csv not found, spectral fit skipped or did not complete