[Tue Sep  4 23:57:18 2012] Detection parameters:
  Position = (400.9, 302.0) = 5 34 3.41 21 59 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 269.8 +/- 33.6
  Background counts = 295.3
  Rate = 0.01 +/- 0.002

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.43'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.3, npix_max = 32, mask sum = 29, frac = 0.904
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 10.14"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src80.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src80.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src80.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed Sep  5 05:33:27 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Wed Sep  5 12:11:55 2012] Spatial fit model total counts = 5268.680000, observed total counts = 5349.000000
[Wed Sep  5 12:11:55 2012] Offset between fit and detection position for source 92 = 0.547952 pixels
[Wed Sep  5 12:11:55 2012] Warning, changing simple spatial fit ID from 80 to 61
[Wed Sep  5 12:11:55 2012] 5186.995600 total counts/ 5103.750000 bgd. counts: snr = 1.165243
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 0.547952 pixels
  Position = (400.4, 301.8) = 5 34 3.56 21 59 33.7
  Extent = 2.9 (2.6-4.0)", rotation angle = 0
  Source counts = 83.2 +/- 72.0
  Background counts = 5103.8
  Rate = 0.004 +/- 0.004
  Deleting source due to low Poisson probability