[Tue Sep  4 23:57:18 2012] Detection parameters:
  Position = (229.4, 314.0) = 5 34 57.03 22 0 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 315.1 +/- 28.6
  Background counts = 416.0
  Rate = 0.03 +/- 0.003

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 5.13'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.834
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 8.99"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src79.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src79.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src79_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src79.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Wed Sep  5 05:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src79.csv
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Wed Sep  5 05:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src79.csv
[Wed Sep  5 05:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:55 2012] Spatial fit model total counts = 4736.790000, observed total counts = 3907.000000
[Wed Sep  5 12:11:55 2012] Poor agreement between spatial fit and data for source 91
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 2
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.834
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 8.99"
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src75.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src75.csv
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src75_1.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src75.csv
[Wed Sep  5 21:35:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Wed Sep  5 21:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75.csv
[Wed Sep  5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Wed Sep  5 21:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75.csv
[Wed Sep  5 21:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Source 91 is offset by 3.603824 and 3.677928 pixels which is larger than
2 X fitted extent = 8.116552 x 1.638901, not incorporating fit results
[Thu Sep  6 05:22:01 2012] Spatial fit model total counts = 4470.590000, observed total counts = 3907.000000
[Thu Sep  6 05:22:01 2012] Poor agreement between spatial fit and data for source 91
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:42 2012] XMMSAS src. selection expression = ellipse(19911.756699, 27266.223694, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:42 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src91_src.reg
[Thu Sep  6 05:22:42 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (192, 276) - (267, 351)
[Thu Sep  6 05:22:42 2012] XMMSAS bgd. selection expression = annulus(19911.756699, 27266.223694, 1087.500000, 2175.000000, X, Y) && !ellipse(20177.352554, 27796.948120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20603.515289, 24414.687714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19830.222076, 29084.878937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(20348.280685, 25966.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20435.900635, 25196.811554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19614.198273, 29526.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20177.539734, 26365.733337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19395.535370, 30145.125061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18161.449875, 30212.148621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18918.271286, 29620.610748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18093.724060, 28747.838898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18558.715271, 28924.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19359.744247, 28576.791290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19530.461304, 28224.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18734.381302, 27817.091827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19688.450150, 24497.766235, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:42 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src91.gif
[Thu Sep  6 06:30:51 2012] Mean detx,y = (671.82, -7363.89) 
[Thu Sep  6 06:30:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 06:31:09 2012] grppha failed
[Thu Sep  6 06:31:09 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src91_src.pi.gz
[Thu Sep  6 06:31:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Thu Sep  6 06:44:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:56 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src91_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete