[Tue Sep  4 23:57:18 2012] Detection parameters:
  Position = (403.7, 257.1) = 5 34 2.55 21 56 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.3 +/- 29.0
  Background counts = 228.4
  Rate = 0.01 +/- 0.002

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 8.20'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.53"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.968
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 74 for pass 0, mean size = 10.53"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src74.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src74.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src74_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src74.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Wed Sep  5 05:33:27 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src74 appears to have run properly
[Wed Sep  5 12:11:55 2012] Spatial fit model total counts = 3629.440000, observed total counts = 3639.000000
[Wed Sep  5 12:11:55 2012] Offset between fit and detection position for source 85 = 2.086677 pixels
[Wed Sep  5 12:11:55 2012] 3440.864000 total counts/ 3136.540000 bgd. counts: snr = 5.433889
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 2.086677 pixels
  Position = (401.7, 257.8) = 5 34 3.16 21 56 22.5
  Extent = 10.7 (7.9-15.3)", rotation angle = 0
  Source counts = 304.3 +/- 58.7
  Background counts = 3136.5
  Rate = 0.02 +/- 0.003
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 100
[Wed Sep  5 12:12:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.851
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 10.74"
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src70.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src70.csv
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src70_1.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src70.csv
[Wed Sep  5 21:35:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src70.csv
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src70.csv
[Wed Sep  5 21:35:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 70 centroid is now closest to src. 68
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:42 2012] XMMSAS src. selection expression = ellipse(34901.999200, 22383.439220, 644.142019, 644.142019, 0.000000, X, Y)
[Thu Sep  6 05:22:42 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src85_src.reg
[Thu Sep  6 05:22:42 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (365, 221) - (439, 295)
[Thu Sep  6 05:22:42 2012] XMMSAS bgd. selection expression = annulus(34901.999200, 22383.439220, 1073.570031, 2147.140062, X, Y) && !ellipse(35896.066000, 24545.282000, 702.612020, 702.612020, 0.000000, X, Y) && !ellipse(34512.287200, 25397.882600, 1399.400040, 354.975210, 83.404200, X, Y) && !ellipse(34546.184000, 24592.824000, 569.021616, 569.021616, 0.000000, X, Y) && !ellipse(34487.847626, 23428.718689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(35689.261658, 23017.927246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.750000, 25141.361400, 1488.808043, 1488.808043, 0.000000, X, Y) && !ellipse(34685.796800, 23945.036000, 964.208028, 356.573610, 79.991200, X, Y) && !ellipse(35484.234985, 25253.913269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35222.863281, 25089.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35882.452430, 24648.311200, 712.912021, 712.912021, 0.000000, X, Y) && !ellipse(35286.764526, 24148.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36363.357666, 24014.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.049988, 23005.214966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34933.576599, 20508.242218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.984467, 23167.657623, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:42 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src85.gif
[Thu Sep  6 06:29:05 2012] Mean detx,y = (-5946.90, 7137.59) 
[Thu Sep  6 06:29:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 06:29:13 2012] grppha failed
[Thu Sep  6 06:29:13 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src85_src.pi.gz
[Thu Sep  6 06:29:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src85_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Flag c found in src. 85 procflags, skipping spectral fitting
[Thu Sep  6 08:02:47 2012] Source 85 has no response, skipping
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src85_pl.csv not found, spectral fit skipped or did not complete