[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (401.9, 341.0) = 5 34 3.08 22 2 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 643.9 +/- 42.0
  Background counts = 544.5
  Rate = 0.05 +/- 0.003

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 8.11'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.856
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 10.48"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src53.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src53.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src53.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed Sep  5 05:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Sep  5 05:33:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed Sep  5 05:33:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 53 centroid is now closest to src. 13
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 4
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.856
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 10.48"
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src52.ximg exists
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src52_1.ximg exists
[Wed Sep  5 21:35:16 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src52 appears to have run properly
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed Sep  5 21:35:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 52 centroid is now closest to src. 16
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:41 2012] XMMSAS src. selection expression = ellipse(34916.504761, 29620.082397, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:41 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src61_src.reg
[Thu Sep  6 05:22:41 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (364, 304) - (439, 379)
[Thu Sep  6 05:22:41 2012] XMMSAS bgd. selection expression = annulus(34916.504761, 29620.082397, 1087.500000, 2175.000000, X, Y) && !ellipse(35077.506000, 28953.446000, 617.231218, 617.231218, 0.000000, X, Y) && !ellipse(33461.246033, 30493.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.358215, 30051.726440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.000000, 29717.444977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34068.111389, 28225.435333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34227.166000, 27608.126000, 1626.992047, 1626.992047, 0.000000, X, Y) && !ellipse(34312.786000, 27229.302000, 437.258413, 437.258413, 0.000000, X, Y) && !ellipse(34057.626678, 26850.491241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34637.155853, 27708.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33331.046051, 32055.508911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33508.282532, 31277.659668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36611.494049, 28046.050934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(34825.796000, 31404.374000, 1330.728038, 1330.728038, 0.000000, X, Y) && !ellipse(34711.820587, 30416.604462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34584.071198, 28289.862274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36700.517181, 26918.669739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(35302.758423, 26738.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.208160, 30934.667053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35454.568000, 28255.527600, 776.080022, 776.080022, 0.000000, X, Y) && !ellipse(35835.452881, 27881.024933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36762.381780, 26352.156000, 1753.240050, 1753.240050, 0.000000, X, Y) && !ellipse(35921.162537, 27498.514862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.268000, 27374.176000, 1750.680050, 1750.680050, 0.000000, X, Y) && !ellipse(35699.010925, 26670.666107, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:41 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src61.gif
[Thu Sep  6 06:12:16 2012] Mean detx,y = (1210.39, 7956.24) 
[Thu Sep  6 06:12:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 06:12:28 2012] grppha failed
[Thu Sep  6 06:12:28 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src61_src.pi.gz
[Thu Sep  6 06:12:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Thu Sep  6 06:44:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:53 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src61_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete