[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (397.0, 269.9) = 5 34 4.64 21 57 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 486.2 +/- 35.2
  Background counts = 235.9
  Rate = 0.03 +/- 0.002

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.44'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.3, npix_max = 32, mask sum = 29, frac = 0.903
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 10.15"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src39.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src39.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src39.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 39 centroid is now closest to src. 33
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 73
[Wed Sep  5 12:11:55 2012] Source is confused with source 100
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.3, npix_max = 32, mask sum = 29, frac = 0.903
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 10.15"
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src38.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src38.csv
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src38.csv
[Wed Sep  5 21:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Sep  5 21:35:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 10.263409 pixels away
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 38 centroid is now closest to src. 33
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:40 2012] XMMSAS src. selection expression = ellipse(34487.847626, 23428.718689, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:40 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src46_src.reg
[Thu Sep  6 05:22:40 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (359, 232) - (434, 307)
[Thu Sep  6 05:22:40 2012] XMMSAS bgd. selection expression = annulus(34487.847626, 23428.718689, 1087.500000, 2175.000000, X, Y) && !ellipse(34395.298615, 26125.214233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35896.066000, 24545.282000, 702.612020, 702.612020, 0.000000, X, Y) && !ellipse(34512.287200, 25397.882600, 1399.400040, 354.975210, 83.404200, X, Y) && !ellipse(34546.184000, 24592.824000, 569.021616, 569.021616, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(34699.495941, 25755.647430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35689.261658, 23017.927246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.750000, 25141.361400, 1488.808043, 1488.808043, 0.000000, X, Y) && !ellipse(34685.796800, 23945.036000, 964.208028, 356.573610, 79.991200, X, Y) && !ellipse(34901.999200, 22383.439220, 858.856025, 858.856025, 0.000000, X, Y) && !ellipse(36762.381780, 26352.156000, 1753.240050, 1753.240050, 0.000000, X, Y) && !ellipse(35484.234985, 25253.913269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35222.863281, 25089.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35882.452430, 24648.311200, 712.912021, 712.912021, 0.000000, X, Y) && !ellipse(35286.764526, 24148.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36363.357666, 24014.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.049988, 23005.214966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34933.576599, 20508.242218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35831.820801, 26224.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.984467, 23167.657623, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:40 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src46.gif
[Thu Sep  6 05:59:09 2012] Mean detx,y = (-4861.29, 6971.07) 
[Thu Sep  6 05:59:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 05:59:16 2012] grppha failed
[Thu Sep  6 05:59:17 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src46_src.pi.gz
[Thu Sep  6 05:59:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu Sep  6 06:44:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:52 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src46_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete