[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (397.5, 283.9) = 5 34 4.48 21 58 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 691.1 +/- 38.2
  Background counts = 346.7
  Rate = 0.06 +/- 0.003

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.26'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.822
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.06"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src38.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src38.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src38.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 38 centroid is now closest to src. 21
[Wed Sep  5 12:11:55 2012] Source 45 is offset by 6.320963 and -3.351396 pixels which is larger than
2 X fitted extent = 1.951058 x 1.951058, not incorporating fit results
[Wed Sep  5 12:11:55 2012] Spatial fit model total counts = 7904.830000, observed total counts = 8045.000000
[Wed Sep  5 12:11:55 2012] Offset between fit and detection position for source 45 = 0.691994 pixels
[Wed Sep  5 12:11:55 2012] Warning, changing simple spatial fit ID from 38 to 83
[Wed Sep  5 12:11:55 2012] 7228.131000 total counts/ 6950.610000 bgd. counts: snr = 3.328775
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.691994 pixels
  Position = (397.6, 283.2) = 5 34 4.43 21 58 13.0
  Extent = 7.1 (4.2-9.7)", rotation angle = 0
  Source counts = 277.5 +/- 85.0
  Background counts = 6950.6
  Rate = 0.01 +/- 0.004
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 33
[Wed Sep  5 12:12:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Wed Sep  5 12:12:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.823
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 7.11"
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src37.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src37.csv
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src37.csv
[Wed Sep  5 21:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Sep  5 21:35:19 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Sep  5 21:35:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src37.csv
[Wed Sep  5 21:35:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 37 centroid is now closest to src. 72
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:40 2012] XMMSAS src. selection expression = ellipse(34546.184000, 24592.824000, 426.766212, 426.766212, 0.000000, X, Y)
[Thu Sep  6 05:22:40 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src45_src.reg
[Thu Sep  6 05:22:40 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (373, 259) - (422, 308)
[Thu Sep  6 05:22:40 2012] XMMSAS bgd. selection expression = annulus(34546.184000, 24592.824000, 711.277020, 1422.554041, X, Y) && !ellipse(34227.166000, 27608.126000, 1626.992047, 1626.992047, 0.000000, X, Y) && !ellipse(34057.626678, 26850.491241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.298615, 26125.214233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35896.066000, 24545.282000, 702.612020, 702.612020, 0.000000, X, Y) && !ellipse(34512.287200, 25397.882600, 1399.400040, 354.975210, 83.404200, X, Y) && !ellipse(34487.847626, 23428.718689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(35302.758423, 26738.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34699.495941, 25755.647430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35689.261658, 23017.927246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.750000, 25141.361400, 1488.808043, 1488.808043, 0.000000, X, Y) && !ellipse(34685.796800, 23945.036000, 964.208028, 356.573610, 79.991200, X, Y) && !ellipse(34901.999200, 22383.439220, 858.856025, 858.856025, 0.000000, X, Y) && !ellipse(36762.381780, 26352.156000, 1753.240050, 1753.240050, 0.000000, X, Y) && !ellipse(35484.234985, 25253.913269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35222.863281, 25089.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35882.452430, 24648.311200, 712.912021, 712.912021, 0.000000, X, Y) && !ellipse(35286.764526, 24148.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36363.357666, 24014.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.049988, 23005.214966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.268000, 27374.176000, 1750.680050, 1750.680050, 0.000000, X, Y) && !ellipse(35699.010925, 26670.666107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35831.820801, 26224.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.984467, 23167.657623, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:40 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src45.gif
[Thu Sep  6 05:58:51 2012] Mean detx,y = (-3730.10, 7047.03) 
[Thu Sep  6 05:58:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 05:59:03 2012] grppha failed
[Thu Sep  6 05:59:03 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src45_src.pi.gz
[Thu Sep  6 05:59:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src45_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Flag b found in src. 45 procflags, skipping spectral fitting
[Thu Sep  6 08:02:47 2012] Flag c found in src. 45 procflags, skipping spectral fitting
[Thu Sep  6 08:02:47 2012] Source 45 has no response, skipping
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete