[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (385.7, 360.1) = 5 34 8.14 22 3 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 819.6 +/- 46.3
  Background counts = 554.9
  Rate = 0.06 +/- 0.003

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.75'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.4, npix_max = 32, mask sum = 32, frac = 0.972
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.30"
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src35.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src35.csv
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src35.csv
[Wed Sep  5 05:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Spatial fit model total counts = 11546.500000, observed total counts = 7027.000000
[Wed Sep  5 12:11:54 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.4, npix_max = 32, mask sum = 32, frac = 0.972
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 10.30"
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src34.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src34.csv
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src34.csv
[Wed Sep  5 21:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed Sep  5 21:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Spatial fit model total counts = 11495.100000, observed total counts = 7027.000000
[Thu Sep  6 05:22:01 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:39 2012] XMMSAS src. selection expression = ellipse(33508.282532, 31277.659668, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:39 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src42_src.reg
[Thu Sep  6 05:22:39 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (348, 323) - (423, 398)
[Thu Sep  6 05:22:39 2012] XMMSAS bgd. selection expression = annulus(33508.282532, 31277.659668, 1087.500000, 2175.000000, X, Y) && !ellipse(34102.209930, 32740.233002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35077.506000, 28953.446000, 617.231218, 617.231218, 0.000000, X, Y) && !ellipse(33461.246033, 30493.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.358215, 30051.726440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.000000, 29717.444977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34227.166000, 27608.126000, 1626.992047, 1626.992047, 0.000000, X, Y) && !ellipse(28847.070420, 34668.596000, 2817.864081, 2817.864081, 0.000000, X, Y) && !ellipse(33331.046051, 32055.508911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(34084.301758, 34028.102753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34825.796000, 31404.374000, 1330.728038, 1330.728038, 0.000000, X, Y) && !ellipse(34711.820587, 30416.604462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34916.504761, 29620.082397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34584.071198, 28289.862274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(33143.046082, 32734.851257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.208160, 30934.667053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33618.429948, 33873.244506, 1750.680050, 795.188671, 89.983536, X, Y) && !ellipse(36404.268000, 27374.176000, 1750.680050, 1750.680050, 0.000000, X, Y)
[Thu Sep  6 05:22:39 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src42.gif
[Thu Sep  6 05:57:51 2012] Mean detx,y = (3007.72, 6903.37) 
[Thu Sep  6 05:57:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 05:58:05 2012] grppha failed
[Thu Sep  6 05:58:05 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src42_src.pi.gz
[Thu Sep  6 05:58:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Thu Sep  6 06:44:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:51 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src42_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete