[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (383.7, 369.0) = 5 34 8.78 22 4 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 678.3 +/- 48.2
  Background counts = 576.0
  Rate = 0.05 +/- 0.004

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 8.02'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.803
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 10.44"
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src34.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src34.csv
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src34_1.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src34.csv
[Wed Sep  5 05:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 34 centroid is now closest to src. 3
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.803
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 10.44"
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src33.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src33.csv
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src33.csv
[Wed Sep  5 21:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src33.csv
[Wed Sep  5 21:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 33 centroid is now closest to src. 84
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:39 2012] XMMSAS src. selection expression = ellipse(33331.046051, 32055.508911, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:39 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src41_src.reg
[Thu Sep  6 05:22:39 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (346, 332) - (421, 407)
[Thu Sep  6 05:22:39 2012] XMMSAS bgd. selection expression = annulus(33331.046051, 32055.508911, 1087.500000, 2175.000000, X, Y) && !ellipse(34102.209930, 32740.233002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31656.444733, 35007.699707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31171.970917, 34978.608551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33461.246033, 30493.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.358215, 30051.726440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.000000, 29717.444977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.013336, 35075.124176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.070420, 34668.596000, 2817.864081, 2817.864081, 0.000000, X, Y) && !ellipse(33508.282532, 31277.659668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(34084.301758, 34028.102753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34825.796000, 31404.374000, 1330.728038, 1330.728038, 0.000000, X, Y) && !ellipse(34711.820587, 30416.604462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34916.504761, 29620.082397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(33143.046082, 32734.851257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.208160, 30934.667053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.525421, 35087.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33618.429948, 33873.244506, 1750.680050, 795.188671, 89.983536, X, Y)
[Thu Sep  6 05:22:39 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src41.gif
[Thu Sep  6 05:57:33 2012] Mean detx,y = (3808.77, 6867.40) 
[Thu Sep  6 05:57:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 05:57:46 2012] grppha failed
[Thu Sep  6 05:57:46 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src41_src.pi.gz
[Thu Sep  6 05:57:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Sep  6 06:44:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:51 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src41_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete