[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (266.1, 392.2) = 5 34 45.58 22 6 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 549.2 +/- 42.2
  Background counts = 334.8
  Rate = 0.06 +/- 0.004

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.19'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.763
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.02"
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src33.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src33.csv
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src33.csv
[Wed Sep  5 05:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 33 centroid is now closest to src. 82
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 11
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.763
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 10.02"
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src32.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src32.csv
[Wed Sep  5 21:35:16 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src32_1.ximg exists
[Wed Sep  5 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src32.csv
[Wed Sep  5 21:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Wed Sep  5 21:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Spatial fit model total counts = 5747.520000, observed total counts = 4921.000000
[Thu Sep  6 05:22:01 2012] Poor agreement between spatial fit and data for source 40
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 32 centroid is now closest to src. 37
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:39 2012] XMMSAS src. selection expression = ellipse(23100.326080, 34070.070801, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:39 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src40_src.reg
[Thu Sep  6 05:22:39 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (229, 355) - (304, 430)
[Thu Sep  6 05:22:39 2012] XMMSAS bgd. selection expression = annulus(23100.326080, 34070.070801, 1087.500000, 2175.000000, X, Y) && !ellipse(21215.873901, 33780.731018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.472000, 34880.900000, 1655.488048, 1655.488048, 0.000000, X, Y) && !ellipse(23644.548676, 34151.237701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20668.591385, 33747.357300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.485800, 35750.534000, 2358.560068, 2358.560068, 0.000000, X, Y) && !ellipse(23527.984924, 35024.253815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(26498.922000, 36410.810000, 1294.072037, 1294.072037, 0.000000, X, Y) && !ellipse(23233.106750, 34846.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.750336, 33950.395355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.576000, 38034.244000, 1805.544052, 1206.216035, 64.688000, X, Y) && !ellipse(22827.734222, 34977.257141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.700653, 36839.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.071686, 35907.364349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.140000, 35728.948000, 1699.584049, 873.176025, 90.000000, X, Y) && !ellipse(21719.505081, 33922.212219, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:39 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src40.gif
[Thu Sep  6 05:57:12 2012] Mean detx,y = (7092.64, -3213.13) 
[Thu Sep  6 05:57:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 05:57:27 2012] grppha failed
[Thu Sep  6 05:57:27 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src40_src.pi.gz
[Thu Sep  6 05:57:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Sep  6 06:44:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:51 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src40_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete