[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (334.3, 399.9) = 5 34 24.23 22 6 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 590.9 +/- 37.8
  Background counts = 662.0
  Rate = 0.06 +/- 0.004

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.80'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.908
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.33"
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src31.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src31.csv
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src31.csv
[Wed Sep  5 05:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 31 centroid is now closest to src. 55
[Wed Sep  5 12:11:54 2012] Spatial fit model total counts = 16549.200000, observed total counts = 8054.000000
[Wed Sep  5 12:11:54 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 39
[Wed Sep  5 12:11:55 2012] Source is confused with source 56
[Wed Sep  5 12:11:55 2012] Source is confused with source 57
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.908
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 10.33"
[Wed Sep  5 21:35:15 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src30.ximg exists
[Wed Sep  5 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src30.csv
[Wed Sep  5 21:35:15 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Sep  5 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src30.csv
[Wed Sep  5 21:35:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Sep  5 21:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 30 centroid is now closest to src. 29
[Thu Sep  6 05:22:01 2012] Spatial fit model total counts = 7390.140000, observed total counts = 7567.000000
[Thu Sep  6 05:22:01 2012] Offset between fit and detection position for source 38 = 2.660398 pixels
[Thu Sep  6 05:22:01 2012] Warning, changing simple spatial fit ID from 30 to 47
[Thu Sep  6 05:22:01 2012] 5798.120000 total counts/ 4658.870000 bgd. counts: snr = 16.690861
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.660398 pixels
  Position = (334.2, 402.6) = 5 34 24.25 22 6 52.3
  Extent = 14.9 (12.1-17.5)", rotation angle = 0
  Source counts = 1139.2 +/- 76.1
  Background counts = 4658.9
  Rate = 0.06 +/- 0.004
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:39 2012] Counts = 1139.250000, rescaling region sizes by 2.000000
[Thu Sep  6 05:22:39 2012] XMMSAS src. selection expression = ellipse(29028.808000, 34975.774000, 1785.756051, 1785.756051, 0.000000, X, Y)
[Thu Sep  6 05:22:39 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src38_src.reg
[Thu Sep  6 05:22:39 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (232, 300) - (437, 505)
[Thu Sep  6 05:22:39 2012] XMMSAS bgd. selection expression = annulus(29028.808000, 34975.774000, 5952.520171, 11905.040343, X, Y) && !ellipse(20875.000000, 23358.254211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20177.352554, 27796.948120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34102.209930, 32740.233002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35077.506000, 28953.446000, 617.231218, 617.231218, 0.000000, X, Y) && !ellipse(21215.873901, 33780.731018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31656.444733, 35007.699707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31171.970917, 34978.608551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.685852, 34571.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.472000, 34880.900000, 1655.488048, 1655.488048, 0.000000, X, Y) && !ellipse(26241.369110, 34445.268921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.548676, 34151.237701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20668.591385, 33747.357300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33461.246033, 30493.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35328.358215, 30051.726440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.000000, 29717.444977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34068.111389, 28225.435333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34227.166000, 27608.126000, 1626.992047, 1626.992047, 0.000000, X, Y) && !ellipse(34312.786000, 27229.302000, 437.258413, 437.258413, 0.000000, X, Y) && !ellipse(34057.626678, 26850.491241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20603.515289, 24414.687714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20693.722565, 23781.245514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.485800, 35750.534000, 2358.560068, 2358.560068, 0.000000, X, Y) && !ellipse(29480.191559, 35600.243835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.002655, 34995.627289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.298615, 26125.214233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35896.066000, 24545.282000, 702.612020, 702.612020, 0.000000, X, Y) && !ellipse(27836.067322, 36049.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19830.222076, 29084.878937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34637.155853, 27708.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25548.328000, 40487.976000, 2400.320069, 2400.320069, 0.000000, X, Y) && !ellipse(27130.485321, 36735.112213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.013336, 35075.124176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.984924, 35024.253815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28847.070420, 34668.596000, 2817.864081, 2817.864081, 0.000000, X, Y) && !ellipse(23100.326080, 34070.070801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33331.046051, 32055.508911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33508.282532, 31277.659668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36611.494049, 28046.050934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34512.287200, 25397.882600, 1399.400040, 354.975210, 83.404200, X, Y) && !ellipse(34546.184000, 24592.824000, 569.021616, 569.021616, 0.000000, X, Y) && !ellipse(34487.847626, 23428.718689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.783808, 41208.637693, 1902.320055, 1624.059441, 75.324215, X, Y) && !ellipse(25697.905853, 39796.796417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25472.188538, 40150.401184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25878.532000, 38582.126000, 1864.976054, 1864.976054, 0.000000, X, Y) && !ellipse(25811.892400, 38142.444000, 1878.072054, 1878.072054, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(26498.922000, 36410.810000, 1294.072037, 1294.072037, 0.000000, X, Y) && !ellipse(30302.072000, 36166.302000, 1557.240045, 1557.240045, 0.000000, X, Y) && !ellipse(28891.481810, 35492.878576, 1720.872050, 1096.991230, 90.000000, X, Y) && !ellipse(29464.173767, 35174.658569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34084.301758, 34028.102753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34825.796000, 31404.374000, 1330.728038, 1330.728038, 0.000000, X, Y) && !ellipse(34711.820587, 30416.604462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34916.504761, 29620.082397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34584.071198, 28289.862274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36700.517181, 26918.669739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.206000, 27295.048000, 3057.128088, 3057.128088, 0.000000, X, Y) && !ellipse(35302.758423, 26738.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34699.495941, 25755.647430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35689.261658, 23017.927246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20348.280685, 25966.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20435.900635, 25196.811554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34360.750000, 25141.361400, 1488.808043, 1488.808043, 0.000000, X, Y) && !ellipse(34685.796800, 23945.036000, 964.208028, 356.573610, 79.991200, X, Y) && !ellipse(25357.402000, 42103.378000, 2069.768060, 2069.768060, 0.000000, X, Y) && !ellipse(25788.773200, 38911.491200, 1902.320055, 1275.696037, 50.495000, X, Y) && !ellipse(23233.106750, 34846.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.750336, 33950.395355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19614.198273, 29526.134186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20177.539734, 26365.733337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.380768, 42670.780670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.576000, 38034.244000, 1805.544052, 1206.216035, 64.688000, X, Y) && !ellipse(22827.734222, 34977.257141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33143.046082, 32734.851257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34901.999200, 22383.439220, 858.856025, 858.856025, 0.000000, X, Y) && !ellipse(19222.590000, 31857.181800, 1398.592040, 1398.592040, 0.000000, X, Y) && !ellipse(34566.208160, 30934.667053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19395.535370, 30145.125061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35454.568000, 28255.527600, 776.080022, 776.080022, 0.000000, X, Y) && !ellipse(35835.452881, 27881.024933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19911.756699, 27266.223694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36762.381780, 26352.156000, 1753.240050, 1753.240050, 0.000000, X, Y) && !ellipse(35484.234985, 25253.913269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35222.863281, 25089.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35882.452430, 24648.311200, 712.912021, 712.912021, 0.000000, X, Y) && !ellipse(35286.764526, 24148.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36363.357666, 24014.869507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.049988, 23005.214966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.494690, 44055.301453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25533.822388, 43786.283264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24976.977783, 43614.919708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.673157, 39700.833038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26922.405365, 37526.467590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.700653, 36839.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.071686, 35907.364349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.525421, 35087.369171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.140000, 35728.948000, 1699.584049, 873.176025, 90.000000, X, Y) && !ellipse(21719.505081, 33922.212219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33618.429948, 33873.244506, 1750.680050, 795.188671, 89.983536, X, Y) && !ellipse(18953.484940, 31449.023224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18460.514000, 30988.340000, 1498.736043, 1498.736043, 0.000000, X, Y) && !ellipse(18161.449875, 30212.148621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18918.271286, 29620.610748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18093.724060, 28747.838898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18558.715271, 28924.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19359.744247, 28576.791290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19530.461304, 28224.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35921.162537, 27498.514862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18734.381302, 27817.091827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36404.268000, 27374.176000, 1750.680050, 1750.680050, 0.000000, X, Y) && !ellipse(35699.010925, 26670.666107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35831.820801, 26224.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19688.450150, 24497.766235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.984467, 23167.657623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25960.520000, 44246.742000, 2220.232064, 2220.232064, 0.000000, X, Y)
[Thu Sep  6 05:22:39 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src38.gif
[Thu Sep  6 05:50:22 2012] Mean detx,y = (7571.89, 2736.71) 
[Thu Sep  6 05:50:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 05:51:08 2012] grppha failed
[Thu Sep  6 05:51:08 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src38_src.pi.gz
[Thu Sep  6 05:51:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src38_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Flag p found in src. 38 procflags, skipping spectral fitting
[Thu Sep  6 08:02:47 2012] Flag c found in src. 38 procflags, skipping spectral fitting
[Thu Sep  6 08:02:47 2012] Source 38 has no response, skipping
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete