[Tue Sep  4 23:57:17 2012] Detection parameters:
  Position = (282.0, 393.6) = 5 34 40.60 22 6 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 665.7 +/- 38.6
  Background counts = 467.6
  Rate = 0.06 +/- 0.003

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.00'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.678
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.93"
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src24.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src24.csv
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src24.csv
[Wed Sep  5 05:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 10.183619 pixels away
[Wed Sep  5 12:11:55 2012] Spatial fit model total counts = 6435.820000, observed total counts = 5972.000000
[Wed Sep  5 12:11:55 2012] Offset between fit and detection position for source 30 = 4.556467 pixels
[Wed Sep  5 12:11:55 2012] Warning, changing simple spatial fit ID from 24 to 73
[Wed Sep  5 12:11:55 2012] 6251.651000 total counts/ 5666.210000 bgd. counts: snr = 7.777442
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.556467 pixels
  Position = (277.5, 394.3) = 5 34 42.01 22 6 16.2
  Extent = 13.6 (5.6-20.1)", rotation angle = 0
  Source counts = 585.4 +/- 79.1
  Background counts = 5666.2
  Rate = 0.03 +/- 0.004
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 11
[Wed Sep  5 12:12:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Wed Sep  5 12:12:42 2012] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.872
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.63"
[Wed Sep  5 21:35:15 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src23.ximg exists
[Wed Sep  5 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src23.csv
[Wed Sep  5 21:35:15 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Sep  5 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src23.csv
[Wed Sep  5 21:35:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Sep  5 21:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 23 centroid is now closest to src. 109
[Thu Sep  6 05:22:01 2012] Spatial fit model total counts = 4835.650000, observed total counts = 4923.000000
[Thu Sep  6 05:22:01 2012] Offset between fit and detection position for source 30 = 1.292961 pixels
[Thu Sep  6 05:22:01 2012] Warning, changing simple spatial fit ID from 23 to 63
[Thu Sep  6 05:22:01 2012] 4701.205900 total counts/ 4657.140000 bgd. counts: snr = 0.645718
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.292961 pixels
  Position = (276.2, 394.7) = 5 34 42.40 22 6 17.9
  Extent = 3.5 (2.6-4.5)", rotation angle = 0
  Source counts = 44.1 +/- 68.6
  Background counts = 4657.1
  Rate = 0.002 +/- 0.004
  Deleting source due to low Poisson probability