[Tue Sep  4 23:57:16 2012] Detection parameters:
  Position = (393.9, 294.1) = 5 34 5.61 21 59 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 700.2 +/- 39.5
  Background counts = 259.5
  Rate = 0.04 +/- 0.002

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 6.93'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 9.89"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.3, npix_max = 30, mask sum = 31, frac = 1.007
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.89"
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src18.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src18.csv
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src18.csv
[Wed Sep  5 05:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 18 centroid is now closest to src. 20
[Wed Sep  5 12:11:54 2012] Source 21 is offset by 6.108183 and 0.882570 pixels which is larger than
2 X fitted extent = 1.155972 x 1.155972, not incorporating fit results
[Wed Sep  5 12:11:55 2012] Spatial fit model total counts = 6351.720000, observed total counts = 6432.000000
[Wed Sep  5 12:11:55 2012] Offset between fit and detection position for source 21 = 7.627626 pixels
[Wed Sep  5 12:11:55 2012] Warning, changing simple spatial fit ID from 18 to 59
[Wed Sep  5 12:11:55 2012] 5018.800025 total counts/ 5018.800000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 7.627626 pixels
  Position = (389.7, 287.7) = 5 34 6.90 21 58 32.5
  Extent = 20.2 (20.1-40.4)", rotation angle = 0
  Source counts = 0.0 +/- 70.8
  Background counts = 5018.8
  Rate = 1e-09 +/- 0.004
  Deleting source due to low Poisson probability