[Tue Sep 4 23:57:18 2012] Detection parameters: Position = (279.2, 402.0) = 5 34 41.46 22 6 48.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 220.0 +/- 34.1 Background counts = 459.4 Rate = 0.02 +/- 0.003 [Tue Sep 4 23:57:19 2012] Off-axis axis estimate = 7.63' [Wed Sep 5 00:01:41 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 10.25" [Wed Sep 5 00:01:41 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.104 [Wed Sep 5 00:01:41 2012] Giving source the simple spatial ID 101 for pass 0, mean size = 10.25" [Wed Sep 5 12:11:55 2012] Spatial fit model total counts = 4923.100000, observed total counts = 4956.000000 [Wed Sep 5 12:11:55 2012] Offset between fit and detection position for source 113 = 4.279274 pixels [Wed Sep 5 12:11:55 2012] Warning, changing simple spatial fit ID from 101 to 99 [Wed Sep 5 12:11:55 2012] 4947.152000 total counts/ 4161.110000 bgd. counts: snr = 12.185438 Spatial fit parameters: Offset between fit and detection position for source 113 = 4.279274 pixels Position = (276.6, 405.4) = 5 34 42.28 22 7 4.4 Extent = 19.0 (14.8-21.1)", rotation angle = 0 Source counts = 786.0 +/- 70.3 Background counts = 4161.1 Rate = 0.04 +/- 0.004 [Wed Sep 5 12:11:55 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 12:11:55 2012] Assessing source extent using major axis lower bound [Wed Sep 5 12:11:55 2012] Source does appear to be extended [Wed Sep 5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 12:11:55 2012] Source is confused with source 11 [Wed Sep 5 12:12:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Sep 5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 18.99" [Wed Sep 5 12:12:42 2012] source mask rpix=4.4, npix_max = 94, mask sum = 84, frac = 0.887 [Wed Sep 5 12:12:42 2012] Giving source the simple spatial ID 93 for pass 1, mean size = 18.99" [Wed Sep 5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src93.ximg exists [Wed Sep 5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src93.csv [Wed Sep 5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src93_1.ximg exists [Wed Sep 5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src93.csv [Wed Sep 5 21:35:17 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src93_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src93.ximg exists [Wed Sep 5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists [Wed Sep 5 21:35:20 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly [Thu Sep 6 05:22:01 2012] Spatial fit model total counts = 5475.450000, observed total counts = 5504.000000 [Thu Sep 6 05:22:01 2012] Offset between fit and detection position for source 113 = 5.889116 pixels [Thu Sep 6 05:22:01 2012] Warning, changing simple spatial fit ID from 93 to 90 [Thu Sep 6 05:22:01 2012] 5253.611000 total counts/ 4430.460000 bgd. counts: snr = 12.366736 Spatial fit parameters: Offset between fit and detection position for source 113 = 5.889116 pixels Position = (276.9, 411.2) = 5 34 42.19 22 7 30.0 Extent = 21.2 (21.2-42.5)" x 10.9 (8.9-13.8)", rotation angle = 90 Source counts = 823.2 +/- 72.5 Background counts = 4430.5 Rate = 0.04 +/- 0.004 [Thu Sep 6 05:22:01 2012] Source 113 is offset by 3.976253 and 2.996483 pixels which is larger than 2 X fitted extent = 3.962037 x 3.962037, not incorporating fit results [Thu Sep 6 05:22:01 2012] Vigneting correction estimate = 1.000000 [Thu Sep 6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Sep 6 05:22:01 2012] Assessing source extent using major axis lower bound [Thu Sep 6 05:22:01 2012] Source does appear to be extended [Thu Sep 6 05:22:01 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.53 [Thu Sep 6 05:22:01 2012] Source is asymmetric [Thu Sep 6 05:22:43 2012] XMMSAS src. selection expression = ellipse(24043.140000, 35728.948000, 1274.688037, 654.882019, 90.000000, X, Y) [Thu Sep 6 05:22:43 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src113_src.reg [Thu Sep 6 05:22:43 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (204, 338) - (350, 484) [Thu Sep 6 05:22:43 2012] XMMSAS bgd. selection expression = annulus(24043.140000, 35728.948000, 2124.480061, 4248.960122, X, Y) && !ellipse(21215.873901, 33780.731018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.685852, 34571.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.472000, 34880.900000, 1655.488048, 1655.488048, 0.000000, X, Y) && !ellipse(26241.369110, 34445.268921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.548676, 34151.237701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20668.591385, 33747.357300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.485800, 35750.534000, 2358.560068, 2358.560068, 0.000000, X, Y) && !ellipse(27836.067322, 36049.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25548.328000, 40487.976000, 2400.320069, 2400.320069, 0.000000, X, Y) && !ellipse(27130.485321, 36735.112213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23527.984924, 35024.253815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29028.808000, 34975.774000, 1190.504034, 1190.504034, 0.000000, X, Y) && !ellipse(28847.070420, 34668.596000, 2817.864081, 2817.864081, 0.000000, X, Y) && !ellipse(23100.326080, 34070.070801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.783808, 41208.637693, 1902.320055, 1624.059441, 75.324215, X, Y) && !ellipse(25697.905853, 39796.796417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25472.188538, 40150.401184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25878.532000, 38582.126000, 1864.976054, 1864.976054, 0.000000, X, Y) && !ellipse(25811.892400, 38142.444000, 1878.072054, 1878.072054, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(26498.922000, 36410.810000, 1294.072037, 1294.072037, 0.000000, X, Y) && !ellipse(28891.481810, 35492.878576, 1720.872050, 1096.991230, 90.000000, X, Y) && !ellipse(25788.773200, 38911.491200, 1902.320055, 1275.696037, 50.495000, X, Y) && !ellipse(23233.106750, 34846.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.750336, 33950.395355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.576000, 38034.244000, 1805.544052, 1206.216035, 64.688000, X, Y) && !ellipse(22827.734222, 34977.257141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19222.590000, 31857.181800, 1398.592040, 1398.592040, 0.000000, X, Y) && !ellipse(26481.673157, 39700.833038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26922.405365, 37526.467590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.700653, 36839.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.071686, 35907.364349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21719.505081, 33922.212219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18953.484940, 31449.023224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18460.514000, 30988.340000, 1498.736043, 1498.736043, 0.000000, X, Y) [Thu Sep 6 05:22:43 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src113.gif [Thu Sep 6 06:36:16 2012] Mean detx,y = (8443.32, -2081.43) [Thu Sep 6 06:36:16 2012] Setting backscal keywords in source and bgd. spectrum [Thu Sep 6 06:36:33 2012] grppha failed [Thu Sep 6 06:36:33 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src113_src.pi.gz [Thu Sep 6 06:36:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src113_bgd.pi.gz [Thu Sep 6 08:02:42 2012] Updating aperture counts using extracted products [Thu Sep 6 08:02:42 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src113_src.pi.gz [Thu Sep 6 08:02:42 2012] No arf file for this source, not re-computing flux [Thu Sep 6 08:02:47 2012] Flag b found in src. 113 procflags, skipping spectral fitting [Thu Sep 6 08:02:47 2012] Flag c found in src. 113 procflags, skipping spectral fitting [Thu Sep 6 08:02:47 2012] Source 113 has no response, skipping [Thu Sep 6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src113_pl.csv not found, spectral fit skipped or did not complete