[Tue Sep  4 23:57:16 2012] Detection parameters:
  Position = (272.3, 393.1) = 5 34 43.62 22 6 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 717.5 +/- 37.8
  Background counts = 262.0
  Rate = 0.04 +/- 0.002

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 7.12'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Wed Sep  5 00:01:41 2012] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.544
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.99"
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src9.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src9.csv
[Wed Sep  5 05:33:24 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Sep  5 05:33:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src9.csv
[Wed Sep  5 05:33:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Sep  5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Sep  5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Sep  5 05:33:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 12:11:54 2012] Warning, spatial fit 9 centroid is now closest to src. 83
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 30
[Wed Sep  5 12:11:55 2012] Source is confused with source 40
[Wed Sep  5 12:11:55 2012] Source is confused with source 113
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Wed Sep  5 12:12:42 2012] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.544
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 9.99"
[Wed Sep  5 21:35:15 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src9.ximg exists
[Wed Sep  5 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src9.csv
[Wed Sep  5 21:35:15 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Sep  5 21:35:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src9.csv
[Wed Sep  5 21:35:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Sep  5 21:35:18 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Sep  5 21:35:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Sep  5 21:35:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 9 centroid is now closest to src. 40
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:37 2012] XMMSAS src. selection expression = ellipse(23644.548676, 34151.237701, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:37 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src11_src.reg
[Thu Sep  6 05:22:37 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (235, 356) - (310, 431)
[Thu Sep  6 05:22:37 2012] XMMSAS bgd. selection expression = annulus(23644.548676, 34151.237701, 1087.500000, 2175.000000, X, Y) && !ellipse(21215.873901, 33780.731018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.472000, 34880.900000, 1655.488048, 1655.488048, 0.000000, X, Y) && !ellipse(26241.369110, 34445.268921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20668.591385, 33747.357300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26560.485800, 35750.534000, 2358.560068, 2358.560068, 0.000000, X, Y) && !ellipse(23527.984924, 35024.253815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23100.326080, 34070.070801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.892400, 38142.444000, 1878.072054, 1878.072054, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(26498.922000, 36410.810000, 1294.072037, 1294.072037, 0.000000, X, Y) && !ellipse(23233.106750, 34846.704041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.750336, 33950.395355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.576000, 38034.244000, 1805.544052, 1206.216035, 64.688000, X, Y) && !ellipse(22827.734222, 34977.257141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.700653, 36839.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.071686, 35907.364349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.140000, 35728.948000, 1699.584049, 873.176025, 90.000000, X, Y) && !ellipse(21719.505081, 33922.212219, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 05:22:37 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src11.gif
[Thu Sep  6 05:29:04 2012] Mean detx,y = (7102.14, -2619.06) 
[Thu Sep  6 05:29:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 05:29:17 2012] grppha failed
[Thu Sep  6 05:29:17 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src11_src.pi.gz
[Thu Sep  6 05:29:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Sep  6 06:44:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:49 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:40 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:40 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src11_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete