[Tue Sep 4 23:57:18 2012] Detection parameters: Position = (310.0, 431.9) = 5 34 31.82 22 9 4.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 230.0 +/- 27.2 Background counts = 442.9 Rate = 0.02 +/- 0.003 [Tue Sep 4 23:57:19 2012] Off-axis axis estimate = 9.71' [Wed Sep 5 00:01:41 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 11.28" [Wed Sep 5 00:01:41 2012] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.783 [Wed Sep 5 00:01:41 2012] Giving source the simple spatial ID 95 for pass 0, mean size = 11.28" [Wed Sep 5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src95.ximg exists [Wed Sep 5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src95.csv [Wed Sep 5 05:33:26 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src95_1.ximg exists [Wed Sep 5 05:33:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src95.csv [Wed Sep 5 05:33:26 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src95_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src95.ximg exists [Wed Sep 5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists [Wed Sep 5 05:33:27 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly [Wed Sep 5 12:11:55 2012] Source 107 is offset by -1.450306 and -1.340901 pixels which is larger than 2 X fitted extent = 1.384607 x 1.384607, not incorporating fit results [Wed Sep 5 12:11:55 2012] Warning: source 95 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 107 at 11.147899 pixels away [Wed Sep 5 12:11:55 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 12:11:55 2012] Assessing source extent using major [Wed Sep 5 12:11:55 2012] Source does appear to be extended [Wed Sep 5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 12:11:55 2012] Source is confused with source 52 [Wed Sep 5 12:12:42 2012] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 11.28" [Wed Sep 5 12:12:42 2012] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.783 [Wed Sep 5 12:12:42 2012] Giving source the simple spatial ID 88 for pass 1, mean size = 11.28" [Wed Sep 5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src88.ximg exists [Wed Sep 5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src88_1.ximg exists [Wed Sep 5 21:35:17 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src88 appears to have run properly [Wed Sep 5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src88.ximg exists [Wed Sep 5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists [Wed Sep 5 21:35:20 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src88 appears to have run properly [Thu Sep 6 05:22:01 2012] Warning, spatial fit 88 centroid is now closest to src. 81 [Thu Sep 6 05:22:01 2012] Vigneting correction estimate = 1.000000 [Thu Sep 6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Sep 6 05:22:01 2012] Assessing source extent using major [Thu Sep 6 05:22:01 2012] Source does appear to be extended [Thu Sep 6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Sep 6 05:22:43 2012] XMMSAS src. selection expression = ellipse(26922.405365, 37526.467590, 652.500000, 652.500000, 0.000000, X, Y) [Thu Sep 6 05:22:43 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src107_src.reg [Thu Sep 6 05:22:43 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (273, 394) - (348, 469) [Thu Sep 6 05:22:43 2012] XMMSAS bgd. selection expression = annulus(26922.405365, 37526.467590, 1087.500000, 2175.000000, X, Y) && !ellipse(27530.685852, 34571.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26496.472000, 34880.900000, 1655.488048, 1655.488048, 0.000000, X, Y) && !ellipse(26560.485800, 35750.534000, 2358.560068, 2358.560068, 0.000000, X, Y) && !ellipse(29480.191559, 35600.243835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.002655, 34995.627289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27836.067322, 36049.241150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25548.328000, 40487.976000, 2400.320069, 2400.320069, 0.000000, X, Y) && !ellipse(27130.485321, 36735.112213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29028.808000, 34975.774000, 1190.504034, 1190.504034, 0.000000, X, Y) && !ellipse(28847.070420, 34668.596000, 2817.864081, 2817.864081, 0.000000, X, Y) && !ellipse(25499.783808, 41208.637693, 1902.320055, 1624.059441, 75.324215, X, Y) && !ellipse(25697.905853, 39796.796417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25472.188538, 40150.401184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25878.532000, 38582.126000, 1864.976054, 1864.976054, 0.000000, X, Y) && !ellipse(25811.892400, 38142.444000, 1878.072054, 1878.072054, 0.000000, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(26498.922000, 36410.810000, 1294.072037, 1294.072037, 0.000000, X, Y) && !ellipse(30302.072000, 36166.302000, 1557.240045, 1557.240045, 0.000000, X, Y) && !ellipse(28891.481810, 35492.878576, 1720.872050, 1096.991230, 90.000000, X, Y) && !ellipse(29464.173767, 35174.658569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25788.773200, 38911.491200, 1902.320055, 1275.696037, 50.495000, X, Y) && !ellipse(26129.576000, 38034.244000, 1805.544052, 1206.216035, 64.688000, X, Y) && !ellipse(26481.673157, 39700.833038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.700653, 36839.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.071686, 35907.364349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.140000, 35728.948000, 1699.584049, 873.176025, 90.000000, X, Y) [Thu Sep 6 05:22:43 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src107.gif [Thu Sep 6 06:35:00 2012] Mean detx,y = (9980.88, 930.53) [Thu Sep 6 06:35:01 2012] Setting backscal keywords in source and bgd. spectrum [Thu Sep 6 06:35:13 2012] grppha failed [Thu Sep 6 06:35:13 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src107_src.pi.gz [Thu Sep 6 06:35:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src107_bgd.pi.gz [Thu Sep 6 06:44:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Sep 6 06:44:57 2012] rmf not generated due to insufficient counts [Thu Sep 6 08:02:41 2012] Updating aperture counts using extracted products [Thu Sep 6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src107_src.pi.gz [Thu Sep 6 08:02:42 2012] No arf file for this source, not re-computing flux [Thu Sep 6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Sep 6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src107_pl.csv not found, spectral fit skipped or did not complete