[Tue Sep  4 23:57:18 2012] Detection parameters:
  Position = (294.0, 503.8) = 5 34 36.82 22 14 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.2 +/- 25.0
  Background counts = 159.1
  Rate = 0.008 +/- 0.001

[Tue Sep  4 23:57:19 2012] Off-axis axis estimate = 14.90'
[Wed Sep  5 00:01:41 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:01:41 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Wed Sep  5 00:01:41 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.175
[Wed Sep  5 00:01:41 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 13.88"
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src91.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src91.csv
[Wed Sep  5 05:33:25 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src91_1.ximg exists
[Wed Sep  5 05:33:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src91.csv
[Wed Sep  5 05:33:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Wed Sep  5 05:33:27 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Wed Sep  5 05:33:27 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Wed Sep  5 12:11:55 2012] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 103 at 11.199256 pixels away
[Wed Sep  5 12:11:55 2012] Warning, spatial fit 91 centroid is now closest to src. 134
[Wed Sep  5 12:11:55 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 12:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 12:11:55 2012] Assessing source extent using major
[Wed Sep  5 12:11:55 2012] Source does appear to be extended
[Wed Sep  5 12:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 12:11:55 2012] Source is confused with source 102
[Wed Sep  5 12:12:42 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:12:42 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Wed Sep  5 12:12:42 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.175
[Wed Sep  5 12:12:42 2012] Giving source the simple spatial ID 84 for pass 1, mean size = 13.88"
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src84.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src84.csv
[Wed Sep  5 21:35:17 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src84_1.ximg exists
[Wed Sep  5 21:35:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src84.csv
[Wed Sep  5 21:35:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Wed Sep  5 21:35:20 2012] fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Wed Sep  5 21:35:20 2012] Fit fullrun_mos1_xmm0611181501_pi300-10000_cl_pass1_tfrozen_src84 appears to have run properly
[Thu Sep  6 05:22:01 2012] Warning, spatial fit 84 centroid is now closest to src. 80
[Thu Sep  6 05:22:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 05:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 05:22:01 2012] Assessing source extent using major
[Thu Sep  6 05:22:01 2012] Source does appear to be extended
[Thu Sep  6 05:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 05:22:43 2012] XMMSAS src. selection expression = ellipse(25533.822388, 43786.283264, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 05:22:43 2012] Writing source region out to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src103_src.reg
[Thu Sep  6 05:22:43 2012] Extracting stamp from image fullrun_mos1_xmm0611181501_pi300-10000_cl_sm2.00.img.gz, (257, 466) - (332, 541)
[Thu Sep  6 05:22:43 2012] XMMSAS bgd. selection expression = annulus(25533.822388, 43786.283264, 1087.500000, 2175.000000, X, Y) && !ellipse(25548.328000, 40487.976000, 2400.320069, 2400.320069, 0.000000, X, Y) && !ellipse(25499.783808, 41208.637693, 1902.320055, 1624.059441, 75.324215, X, Y) && !ellipse(25971.814000, 37059.898000, 11266.944324, 11266.944324, 0.000000, X, Y) && !ellipse(25357.402000, 42103.378000, 2069.768060, 2069.768060, 0.000000, X, Y) && !ellipse(25678.380768, 42670.780670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.494690, 44055.301453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24976.977783, 43614.919708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25960.520000, 44246.742000, 2220.232064, 2220.232064, 0.000000, X, Y)
[Thu Sep  6 05:22:43 2012] Writing fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src103.gif
[Thu Sep  6 06:33:50 2012] Mean detx,y = (16361.51, 311.07) 
[Thu Sep  6 06:33:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 06:34:02 2012] grppha failed
[Thu Sep  6 06:34:02 2012] Setting source spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src103_src.pi.gz
[Thu Sep  6 06:34:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Thu Sep  6 06:44:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 06:44:57 2012] rmf not generated due to insufficient counts
[Thu Sep  6 08:02:41 2012] Updating aperture counts using extracted products
[Thu Sep  6 08:02:41 2012] Error reading totcts from fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src103_src.pi.gz
[Thu Sep  6 08:02:42 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 08:02:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 08:02:48 2012] xmm0611181501/analysis//spectral/fullrun_mos1_xmm0611181501_pi300-10000_pass1_cl_src103_pl.csv not found, spectral fit skipped or did not complete