[Tue May 29 03:54:29 2012] Detection parameters:
  Position = (322.7, 225.1) = 5 34 28.93 21 54 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.2 +/- 24.7
  Background counts = 180.0
  Rate = 0.04 +/- 0.006

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 5.60'
[Tue May 29 06:59:58 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Tue May 29 06:59:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.764
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.23"
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src37.ximg exists
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue May 29 10:22:43 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src37 appears to have run properly
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue May 29 10:22:45 2012] Fit fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Tue May 29 10:23:17 2012] Spatial fit model total counts = 2743.700000, observed total counts = 2757.000000
[Tue May 29 10:23:17 2012] Offset between fit and detection position for source 87 = 5.752371 pixels
[Tue May 29 10:23:17 2012] 2800.710000 total counts/ 2442.810000 bgd. counts: snr = 7.241305
Spatial fit parameters:
  Offset between fit and detection position for source 87 = 5.752371 pixels
  Position = (319.3, 220.5) = 5 34 29.98 21 53 53.2
  Extent = 18.5 (18.4-36.9)", rotation angle = 0
  Source counts = 357.9 +/- 52.9
  Background counts = 2442.8
  Rate = 0.06 +/- 0.008
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major axis lower bound
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 2
[Tue May 29 15:21:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 18.45"
[Tue May 29 15:21:58 2012] source mask rpix=4.2, npix_max = 89, mask sum = 76, frac = 0.845
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 18.45"
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src33.ximg exists
[Tue May 29 19:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src33.csv
[Tue May 29 19:57:59 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue May 29 19:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src33.csv
[Tue May 29 19:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue May 29 19:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue May 29 19:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue May 29 19:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:30 2012] Warning, spatial fit 33 centroid is now closest to src. 79
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major axis lower bound
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:02 2012] XMMSAS src. selection expression = ellipse(27730.228000, 19133.012000, 1107.222032, 1107.222032, 0.000000, X, Y)
[Tue May 29 21:21:02 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src87_src.reg
[Tue May 29 21:21:02 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (256, 157) - (383, 284)
[Tue May 29 21:21:02 2012] XMMSAS bgd. selection expression = annulus(27730.228000, 19133.012000, 1845.370053, 3690.740106, X, Y) && !ellipse(26788.283905, 18949.863480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26782.501251, 19798.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.444000, 19323.141400, 865.160025, 865.160025, 0.000000, X, Y) && !ellipse(27482.940460, 20274.359360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30422.907501, 19770.863586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26508.629669, 18152.009918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28938.841705, 20190.384766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25143.795929, 20430.602524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.094482, 20397.058884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.145081, 20227.280380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.260590, 18335.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.184082, 20143.220825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.248260, 20226.645828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27137.414948, 16612.254883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25033.886000, 19688.854000, 1432.848041, 1106.584032, 353.799200, X, Y)
[Tue May 29 21:21:02 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src87.gif
[Tue May 29 21:30:05 2012] Mean detx,y = (-998.04, -8205.82) 
[Tue May 29 21:30:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:30:24 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:30:24 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Tue May 29 21:30:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Tue May 29 22:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:58 2012] Using photon index=1.80, rate=0.0563, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src87.arf
[Tue May 29 22:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:58 2012] Updating source flux to 9.2e-13
[Tue May 29 23:02:02 2012] Flag c found in src. 87 procflags, skipping spectral fitting