[Tue May 29 03:54:29 2012] Detection parameters:
  Position = (297.5, 233.1) = 5 34 36.79 21 54 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.4 +/- 23.7
  Background counts = 227.6
  Rate = 0.03 +/- 0.005

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 4.74'
[Tue May 29 06:59:58 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Tue May 29 06:59:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 8.80"
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src60.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src60.csv
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src60_1.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src60.csv
[Tue May 29 10:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src60.csv
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src60.csv
[Tue May 29 10:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:17 2012] Warning, spatial fit 60 centroid is now closest to src. 83
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 83
[Tue May 29 15:21:58 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Tue May 29 15:21:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 8.80"
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src53.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src53.csv
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src53_1.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src53.csv
[Tue May 29 19:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Tue May 29 19:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Tue May 29 19:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Tue May 29 19:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:30 2012] Warning, spatial fit 53 centroid is now closest to src. 9
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:03 2012] XMMSAS src. selection expression = ellipse(25833.145081, 20227.280380, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src80_src.reg
[Tue May 29 21:21:03 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (260, 196) - (335, 271)
[Tue May 29 21:21:03 2012] XMMSAS bgd. selection expression = annulus(25833.145081, 20227.280380, 1087.500000, 2175.000000, X, Y) && !ellipse(26788.283905, 18949.863480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26782.501251, 19798.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.444000, 19323.141400, 865.160025, 865.160025, 0.000000, X, Y) && !ellipse(27482.940460, 20274.359360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.228000, 19133.012000, 1476.296042, 1476.296042, 0.000000, X, Y) && !ellipse(26508.629669, 18152.009918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25143.795929, 20430.602524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26338.094482, 20397.058884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.260590, 18335.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.184082, 20143.220825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25033.886000, 19688.854000, 1432.848041, 1106.584032, 353.799200, X, Y) && !ellipse(22805.461182, 20583.996841, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src80.gif
[Tue May 29 21:39:06 2012] Mean detx,y = (936.17, -7344.20) 
[Tue May 29 21:39:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:39:14 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:39:14 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Tue May 29 21:39:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Tue May 29 22:45:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 22:45:38 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Tue May 29 22:58:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:59 2012] Using photon index=1.80, rate=0.0257, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src80.arf
[Tue May 29 22:58:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:59 2012] Updating source flux to 4.1e-13
[Tue May 29 23:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting