[Tue May 29 03:54:28 2012] Detection parameters:
  Position = (314.5, 395.3) = 5 34 31.47 22 6 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 525.7 +/- 29.0
  Background counts = 183.8
  Rate = 0.1 +/- 0.007

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 7.11'
[Tue May 29 06:59:58 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Tue May 29 06:59:58 2012] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.672
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.99"
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src2.csv
[Tue May 29 10:22:42 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 29 10:22:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src2.csv
[Tue May 29 10:22:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 29 10:22:44 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 29 10:22:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 29 10:22:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:17 2012] Spatial fit model total counts = 2890.140000, observed total counts = 2312.000000
[Tue May 29 10:23:17 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 10:23:17 2012] Source 8 is offset by 5.477990 and 6.466390 pixels which is larger than
2 X fitted extent = 4.075152 x 8.415311, not incorporating fit results
[Tue May 29 10:23:17 2012] Spatial fit model total counts = 3168.580000, observed total counts = 3004.000000
[Tue May 29 10:23:17 2012] Offset between fit and detection position for source 8 = 4.411426 pixels
[Tue May 29 10:23:17 2012] Warning, changing simple spatial fit ID from 2 to 29
[Tue May 29 10:23:17 2012] 2703.809000 total counts/ 2244.350000 bgd. counts: snr = 9.698431
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.411426 pixels
  Position = (312.9, 399.4) = 5 34 31.98 22 6 51.3
  Extent = 13.3 (4.5-20.6)", rotation angle = 0
  Source counts = 459.5 +/- 52.0
  Background counts = 2244.3
  Rate = 0.07 +/- 0.008
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major axis lower bound
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 5
[Tue May 29 15:21:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Tue May 29 15:21:58 2012] source mask rpix=3.0, npix_max = 50, mask sum = 25, frac = 0.496
[Tue May 29 15:21:58 2012] Skipping simple spatial due to low active detector fraction
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major axis lower bound
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:01 2012] XMMSAS src. selection expression = ellipse(27170.788000, 34694.964000, 795.954023, 795.954023, 0.000000, X, Y)
[Tue May 29 21:21:01 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src8_src.reg
[Tue May 29 21:21:01 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (267, 354) - (359, 445)
[Tue May 29 21:21:01 2012] XMMSAS bgd. selection expression = annulus(27170.788000, 34694.964000, 1326.590038, 2653.180076, X, Y) && !ellipse(28133.110000, 34697.680000, 1673.640048, 1673.640048, 0.000000, X, Y) && !ellipse(27737.924164, 34967.791962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.070000, 36107.872000, 1240.896036, 1240.896036, 0.000000, X, Y) && !ellipse(29552.711029, 34306.102905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.622467, 34387.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.055400, 35024.792000, 974.992028, 974.992028, 0.000000, X, Y) && !ellipse(28083.293030, 37542.737610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30167.522888, 34247.997589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.359400, 36245.039200, 754.870422, 754.870422, 0.000000, X, Y) && !ellipse(27352.768000, 36458.490000, 670.779219, 670.779219, 0.000000, X, Y) && !ellipse(25095.208893, 34448.046082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.486816, 35277.453339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27458.976166, 35070.302643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24407.312042, 34460.251251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.432648, 36852.124664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27197.378760, 36424.209200, 950.064027, 950.064027, 0.000000, X, Y) && !ellipse(29187.592800, 35030.693000, 1671.640048, 529.403215, 359.805000, X, Y) && !ellipse(27045.404000, 38490.244000, 1845.232053, 1845.232053, 0.000000, X, Y) && !ellipse(25541.572418, 34428.003265, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:21:01 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src8.gif
[Tue May 29 21:21:37 2012] Mean detx,y = (405.10, 7193.56) 
[Tue May 29 21:21:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:21:52 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:21:53 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 29 21:21:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue May 29 22:58:57 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 29 22:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:58 2012] Using photon index=1.80, rate=0.0723, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src8.arf
[Tue May 29 22:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:58 2012] Updating source flux to 2e-12
[Tue May 29 23:02:02 2012] Flag b found in src. 8 procflags, skipping spectral fitting
[Tue May 29 23:02:02 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Tue May 29 23:02:02 2012] Flag c found in src. 8 procflags, skipping spectral fitting