[Tue May 29 03:54:29 2012] Detection parameters:
  Position = (338.4, 233.0) = 5 34 24.00 21 54 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.4 +/- 17.4
  Background counts = 230.7
  Rate = 0.02 +/- 0.003

[Tue May 29 03:54:29 2012] Off-axis axis estimate = 5.56'
[Tue May 29 06:59:58 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue May 29 06:59:58 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Tue May 29 06:59:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.059
[Tue May 29 06:59:58 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 9.21"
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src66.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src66.csv
[Tue May 29 10:22:43 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src66_1.ximg exists
[Tue May 29 10:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src66.csv
[Tue May 29 10:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src66.csv
[Tue May 29 10:22:45 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Tue May 29 10:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src66.csv
[Tue May 29 10:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 10:23:17 2012] Source 78 is offset by -3.638135 and 0.460619 pixels which is larger than
2 X fitted extent = 1.103885 x 1.103885, not incorporating fit results
[Tue May 29 10:23:17 2012] Warning, spatial fit 66 centroid is now closest to src. 81
[Tue May 29 10:23:17 2012] Vigneting correction estimate = 1.000000
[Tue May 29 10:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 10:23:17 2012] Assessing source extent using major
[Tue May 29 10:23:17 2012] Source does appear to be extended
[Tue May 29 10:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 10:23:17 2012] Source is confused with source 81
[Tue May 29 15:21:58 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue May 29 15:21:58 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Tue May 29 15:21:58 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.059
[Tue May 29 15:21:58 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 9.21"
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src59.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src59.csv
[Tue May 29 19:58:00 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src59_1.ximg exists
[Tue May 29 19:58:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src59.csv
[Tue May 29 19:58:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Tue May 29 19:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Tue May 29 19:58:01 2012] fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Tue May 29 19:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src59.csv
[Tue May 29 19:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611181401_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 19:58:30 2012] Source 78 is offset by -2.746503 and 0.492711 pixels which is larger than
2 X fitted extent = 1.134129 x 1.134129, not incorporating fit results
[Tue May 29 19:58:30 2012] Spatial fit model total counts = 3705.220000, observed total counts = 1990.000000
[Tue May 29 19:58:30 2012] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 19:58:30 2012] Vigneting correction estimate = 1.000000
[Tue May 29 19:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 19:58:30 2012] Assessing source extent using major
[Tue May 29 19:58:30 2012] Source does appear to be extended
[Tue May 29 19:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 21:21:03 2012] XMMSAS src. selection expression = ellipse(29394.248260, 20226.645828, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing source region out to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src78_src.reg
[Tue May 29 21:21:03 2012] Extracting stamp from image fullrun_mos2_xmm0611181401_pi300-10000_cl_sm2.00.img.gz, (301, 196) - (376, 271)
[Tue May 29 21:21:03 2012] XMMSAS bgd. selection expression = annulus(29394.248260, 20226.645828, 1087.500000, 2175.000000, X, Y) && !ellipse(26788.283905, 18949.863480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26782.501251, 19798.871490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.444000, 19323.141400, 865.160025, 865.160025, 0.000000, X, Y) && !ellipse(27482.940460, 20274.359360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30422.907501, 19770.863586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.228000, 19133.012000, 1476.296042, 1476.296042, 0.000000, X, Y) && !ellipse(26508.629669, 18152.009918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28938.841705, 20190.384766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26870.260590, 18335.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28038.184082, 20143.220825, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 29 21:21:03 2012] Writing fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src78.gif
[Tue May 29 21:41:06 2012] Mean detx,y = (-2570.14, -7228.98) 
[Tue May 29 21:41:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 21:41:18 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 21:41:18 2012] Setting source spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue May 29 21:41:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Tue May 29 22:50:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 29 22:50:13 2012] rmf not generated due to insufficient counts
[Tue May 29 22:58:58 2012] Updating aperture counts using extracted products
[Tue May 29 22:58:58 2012] Error reading totcts from fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue May 29 22:58:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 22:58:59 2012] Using photon index=1.80, rate=0.0213, arf fullrun_mos2_xmm0611181401_pi300-10000_pass1_cl_src78.arf
[Tue May 29 22:58:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 22:58:59 2012] Updating source flux to 3.7e-13
[Tue May 29 23:02:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting